Materials Reference: Overview and Calculation Method
MatLib contains a glossary of terms (material type, subtype, trade name, lifecycle stage, process, default, alternate). MatLib calculates how materials create global warming impacts through FEM data, country grids, losses, transport, and blends. The country of manufacture can also change results.
Also known as: MatLib, Material Library, glossary, material type, material subtype, trade name, contributor, lifecycle stage, default process, carbon footprint, global warming, kg CO2e, material losses, transport, country of manufacture, electricity grid, blends.
You can look up an exact material, stage or process using material codes, stage IDs and process IDs.
How MatLib organises materials (glossary)- Material Type: the top-level family. Examples include Textiles, Plastics, Leather, Foam, Rubber, Metal, and Wood.
- Material: a specific material within a type. Examples include Cotton or Lyocell within Textiles. The same name can appear in more than one type (Nylon appears as both a Textile and a Plastic), and each one is a separate material.
- Material Subtype: a generic, industry-average variant of a material. Examples include Organic Cotton or Recycled Cotton. Subtypes use representative (average) data and do not connect to any company.
- Trade Name (contributed material): a branded or supplier-specific material that a contributor submitted. The format writes as "Name {Contributor}" - for example, "TENCEL™ Lyocell {Lenzing}". Trade names use the contributor's own primary data.
- Contributor: the company or organisation that provides data for a trade name. Contributors include manufacturers, brands, or programmes such as Better Cotton or Textile Exchange.
- Lifecycle stage: a step in making the material, from raw material through to finishing. Each material type has its own ordered set of stages. For example, Textiles include Raw Materials, Yarn Formation, Textile Formation, Preparation, Coloration, and Finishing.
- Activity / process: the specific operation you click or check at a stage. Examples include Ring Spinning or Knitting. Each process carries its own environmental data.
- Default: the process MatLib pre-selects at a stage when you do not make a choice. The default is the industry-average representative.
- Alternate: any other process you can click or check at a stage, including contributed trade names.
- No process: an explicit choice meaning nothing happens at that stage (zero impact). Some stages allow you to set them to No process for some materials.
- Covers multiple stages: some contributed processes were measured across more than one stage. For example, a fibre whose data already includes spinning. When you choose these processes, the extra stages are already included and you should not add them again.
- Constituent vs Blended stages: you choose constituent stages (for Textiles: Raw Materials, Yarn Formation) per fibre in a blend. Blended stages (fabric formation onward) apply to the whole blended material.
MatLib reports global warming impact in kg CO2e per kg of finished material. The total equals the sum of every lifecycle stage of the material (or of every constituent in a blend). MatLib calculates each stage using one of three methods, applied in this order:
- Supplier facility data (FEM): When an eligible Higg FEM facility links to the stage, that facility's own energy-related emissions replace the industry-average energy part of the process. The process keeps its remaining MSI emissions (the part not covered by facility energy). Learn more in "Supplier facility data (Higg FEM) in MatLib".
- Country-adjusted MSI data: When the process's MSI data splits into energy components and you set a country of manufacture, MatLib recalculates electricity using that country's electricity grid. Natural gas, diesel and coal keep fixed MSI emission factors.
- Standard MSI value: Otherwise MatLib uses the process's published MSI global warming value, which assumes the global-average electricity grid.
Other parts of the calculation work as follows:
- Material losses: each process has a loss rate (material lost as waste). To end with 1 kg of finished material, earlier stages must process more than 1 kg. This means upstream stages grow by the losses of every later stage.
- Transport: MatLib adds a 200 km truck leg (0.0106 kg CO2e per kg moved) at every stage except raw materials. It applies once per stage, even when you click or check several processes at that stage. Transport does not apply to stages you set to "No process".
- Processes that cover several stages: when a process you click or check already includes later stages (for example a fibre whose data includes spinning), those later stages display zero impact so MatLib does not count anything twice.
- "No process": a stage set to No process adds zero impact and no transport.
- Several processes at one stage: some stages (for Textiles: Preparation and Finishing) allow more than one process. Each process adds its own impact. Transport and any FEM facility share apply only once for the stage.
This section continues the list from "How MatLib calculates a material's carbon footprint (global warming)".
- Blends: MatLib calculates raw materials and yarn formation per fibre and weights them by each fibre's share. For textile blends, MatLib calculates fabric formation, preparation, coloration and finishing once for the whole blended material. When different processing chains apply per fibre, MatLib uses the chain from the fibre with the highest processing impact (larger shares break ties). For coated or laminated materials (a barrier combined with a textile or plastic), MatLib calculates the coating or lamination stage once on the combined material.
- Results by stage: the results show a breakdown per stage. This breakdown tells you which of the three methods MatLib used, the mass processed, the transport added and any FEM messages.
You can choose a country of manufacture to change a result. This change only affects processes where the MSI data splits into energy components (marked in the material sections below as "Country of manufacture: changes the electricity part..."). For those processes MatLib replaces the global-average electricity emission factor (0.1746 kg CO2e per MJ, from Higg MSI 3.12) with the grid factor from your selected country.
- Raw materials (the first stage) always use the global-average grid. The country does not change them.
- Processes that do not split into energy components keep their standard MSI value no matter which country you choose.
- You can set a country for raw material processing (yarn formation for Textiles) and for material production (the stages after it) separately, and per stage where the platform allows it. A stage-specific country takes priority.
- When the grid factor from your chosen country equals the global average, MatLib uses the standard MSI value.
- When a linked FEM facility does not qualify as eligible, MatLib still uses that facility's country for the stages it would have covered. This approach makes the result reflect where the material was made. The stage then displays "Using country grid".