---
title: Material Library
description: Material Library
---

[Skip to content](https://support.worldly.io/material-library#main-content)

[Submit a request](https://support.worldly.io/kb-tickets/new?hsLang=en)

[![Worldly logo](https://support.worldly.io/hs-fs/hubfs/Worldly%20Media%20Kit/Worldly%20Logos/Worldly_LogoTM_Red.png?width=250&height=61&name=Worldly_LogoTM_Red.png)](https://support.worldly.io/?hsLang=en)

Open main navigation

Close main navigation

- [Submit a request](https://support.worldly.io/kb-tickets/new)

 How can we help?

- There are no suggestions because the search field is empty.

1. [Help Center](https://support.worldly.io/?hsLang=en)
2. [Product Impact Calculator (PIC)](https://support.worldly.io/product-impact-calculator-pic?hsLang=en)
3. [General](https://support.worldly.io/product-impact-calculator-pic?hsLang=en#general)

# Material Library

Table of Contents

- [What is the Material Library](https://support.worldly.io/material-library#what-is-the-material-library)
- [Material Library or Higg MSI - Where to Create Custom Materials](https://support.worldly.io/material-library#material-library-or-higg-msi)
- [Import MSI Materials](https://support.worldly.io/material-library#import-msi-materials)
- [Material Types](https://support.worldly.io/material-library#material-types)
- [Lifecycle Stages and Supplier Tiers](https://support.worldly.io/material-library#lifecycle-stages-and-supplier-tiers)
- [How to Create Custom Materials](https://support.worldly.io/material-library#how-to-create-custom-materials)
- [Updating a Material](https://support.worldly.io/material-library#updating-a-material)
- [Can I Use Higg MSI Example Materials](https://support.worldly.io/material-library#can-i-use-higg-msi-example-materials)
- [Common Questions](https://support.worldly.io/material-library#common-questions)
- [Bulk Upload Materials (Materials Sheet)](https://support.worldly.io/material-library#bulk-upload-materials)
- [Textiles Short Path Sheet](https://support.worldly.io/material-library#textile-short-path-sheet)
- [Link Tier 2 and Tier 3 Facilities to Materials](https://support.worldly.io/material-library#link-tier-2-and-tier-3-facilities-to-materials)
- [Material Library Downloads](https://support.worldly.io/material-library#material-library-downloads)
- [Material Detail Page and Deleting Materials](https://support.worldly.io/material-library#material-detail-page-and-deleting-materials)
- [Import Your Higg MSI Custom Materials](https://support.worldly.io/material-library#import-your-higg-msi-custom-materials)
- [Materials Reference](https://support.worldly.io/material-library#materials-reference)

### What is the Material Library

The Material Library is part of the Product Impact Calculator (PIC). You find it under Products \> Materials. The Materials tab appears when the Material Library is turned on for your account. If you do not see it, contact your Worldly account team.

Each material you create receives a Worldly Material ID. Worldly calculates its global warming impact (kg CO2e per kg of material) from the base materials, processes, and facilities you specify. You can then use the material in your products.

**![](https://support.worldly.io/hs-fs/hubfs/undefined-Nov-19-2026-10-28-13-9220-PM.png?width=670&height=436&name=undefined-Nov-19-2026-10-28-13-9220-PM.png)**

### Material Library or Higg MSI - Where to Create Custom Materials

Your company has the Product Impact Calculator - Create custom materials in the Material Library.

Your company does not have the Product Impact Calculator - Create custom materials in Higg MSI.

If you already have custom materials in Higg MSI, you do not need to move them. They still work in PIC. Build new materials in the Material Library because only Material Library materials count toward a French Eco-Score. Products built with Higg MSI custom materials are not eligible for a French Eco-Score.

The Material Library allows you to model your supply chain in more detail than Higg MSI. For each material you can set:

- Base materials and their composition (the percentages must add up to exactly 100 percent)
- A process for each production stage
- A facility or country for each stage (Worldly uses an eligible facility's FEM data for that stage)
- Your own Material Code and Tags

### Import MSI Materials

Some accounts have an Import MSI Materials button on the Material Library page. This button copies your company's Higg MSI custom materials into the Material Library. While it runs, you see "Importing MSI Materials". When it finishes, you see "MSI materials synced successfully". If you see "Something went wrong syncing MSI materials", try again or contact Worldly support. To see what Worldly imported and what you need to check afterwards, see Import your Higg MSI custom materials.

### Material Types

Every material has a material type. The Material Library covers these types:

- **Textiles**
- **Plastics**
- **Leather**
- **Metals**
- **Rubber**
- **Foam**
- **Synthetic Leather**
- **Barriers (coatings and laminates)**
- **Insulation Materials**
- **Wood**
- **Mineral Based**
- **Leather Alternatives**

Within each type you choose a base material. A base material is either a generic subtype that uses industry-average data, such as Organic Cotton, or a trade name that uses a supplier's own data, such as TENCEL™ Lyocell {Lenzing}. Recycled content is a base material too - choose the recycled subtype, for example a recycled polyester.

### Lifecycle Stages and Supplier Tiers

A material moves through ordered lifecycle stages. Each stage belongs to a supplier tier. For textiles, the stages are:

| **Stage** | **Name** | **Supplier Tier** |
| --- | --- | --- |
| P001 | Raw Materials | Tier 4 (raw material extraction) |
| P002 | Yarn Formation | Tier 3 (for example spinners) |
| P003 | Textile Formation | Tier 2 (for example knitting or weaving mills) |
| P004 | Preparation | Tier 2 |
| P005 | Coloration | Tier 2 (for example dyeing) |
| P006 | Finishing | Tier 2 |

Other material types have their own stage names, and some have fewer stages. Leather, for example, has Raw Materials, Tanning, Re-Tanning, Drying, and Finishing. Each type's stages are listed in its page in Materials Reference.

The base material you choose sets the raw material stage (P001). For the other stages, you can pick a process. If you leave a stage empty, Worldly uses the default process for that base material. You link Tier 1 (final assembly) on the product, not on the material. See Link a final assembly (Tier 1) facility and FEM.

### How to Create Custom Materials

You create Material Library materials by upload, even if you only need one. You have three options:

Materials sheet - Choose base materials, processes, and facilities yourself. Works for every material type. See Bulk upload materials (Materials sheet).

Textiles Short Path sheet - Describe a fabric by its fibers, yarn size, fabric formation, and coating. Worldly fills in the processes. Textiles only. See Textiles Short Path sheet.

PIC API - See PIC API.

Both sheets are in the upload workspace you open with Import on the Material Library page. If you do not see the Import button, contact your Worldly account team.

To link supplier facilities and use their FEM data, see Link Tier 2 and Tier 3 facilities to materials. A material's Details view shows the FEM year and status for each stage that has a linked facility.

### Updating a Material

You update a material by uploading it again with Overwrite set to true and its Worldly Material ID. When you update a material, Worldly marks every product that uses it as out of date so its impacts can be recalculated. See Outdated products and recalculation.

### Can I Use Higg MSI Example Materials?

Yes. Many of PIC's default materials are Higg MSI example materials. For example, the default leather material MatLE0001 (Leather, Bovine Cow) is the Higg MSI example material for bovine (cow) leather. When a product uses PIC's default assumptions, it already uses these materials. See Product categories and default assumptions.

To use an example material as your own custom material, you have two routes:

Recommended - if you have PIC - Create the material in the Material Library and choose the matching base material, for example a Bovine (Cow) leather subtype. This material is eligible for a French Eco-Score.

In Higg MSI - Duplicate the example material and save it as a custom material. It then works in PIC, but products that use it are not eligible for a French Eco-Score.

### Common Questions

**I have custom materials in Higg MSI. Do I need to recreate them?**

No. They still work in PIC. Create new materials in the Material Library. If your account has the Import MSI Materials button, you can also copy them in - see Import your Higg MSI custom materials.

**Can I create one material without a spreadsheet?**

No. Upload a sheet with just that one material, or use the PIC API.

**What is the fastest way to create a textile material?**

Use the Textiles Short Path sheet.

### Bulk Upload Materials (Materials Sheet)

Use the Materials sheet to add or update many Material Library materials at once. You can choose base materials, processes, and facilities for any material type.

#### Before You Start

The sheet is in the upload workspace under Products - Materials - Import. If you do not see the Materials tab or the Import button, contact your Worldly account team.

You can upload a CSV file, or paste or type your data into the sheet.

For a quick textile without choosing processes, use the Textiles Short Path sheet instead.

#### How Rows Become Materials

In the Materials sheet, each row is one base material (component), not one whole material.

A material made of one base material takes one row, with Composition % set to 100.

A blend takes one row per base material. Every row has the same Material Name.

Rows with the same Material Name combine into one material. Their Composition % values must add up to exactly 100.

Example - A 95 percent cotton / 5 percent elastane fabric called "Stretch Jersey" takes two rows. Both have Material Name "Stretch Jersey". One has a cotton base material at 95, the other an elastane base material at 5.

Material names do not have to be unique in your library. But within one upload, every row with the same name becomes part of the same material. Give different materials different names in the same file.

Worldly reads material-level details (Material Code, Tags, Created, Material Type, Tier 2 and Tier 3 supplier, Overwrite and Worldly Material ID) from the first row of each material. The system ignores values on later rows. Keep all rows of a material together, with the material-level details on the first row.

#### Step by Step - Add New Materials

1. Go to **Products \> Materials** then click **Import**.
2. In the workspace sidebar, open the Materials sheet.
3. Upload your file, or paste or type your data. When asked, match your file's columns to the sheet's columns.
4. On every row, fill in Material Name, Material Type, Base Material and Composition %.
5. Optionally, choose processes for stages P002 to P006, a Yarn Size, and facilities and countries.
6. Leave Overwrite and Worldly Material ID empty.
7. Fix every cell the sheet highlights. You cannot submit until all rows are valid.
8. Click **Submit data and confirm**.

After you match columns, the sheet may hide empty optional columns.

**![](https://support.worldly.io/hs-fs/hubfs/undefined-Nov-19-2026-10-28-10-7485-PM.png?width=670&height=255&name=undefined-Nov-19-2026-10-28-10-7485-PM.png)**

#### Step by Step - Update Existing Materials

1. On the first row of each material you want to change, set Overwrite to true and enter its Worldly Material ID.
2. Fill in the rows as the material should look after the update. Include every base material it should contain.
3. Submit as usual.

Keep in mind:

Without Overwrite and a Worldly Material ID, the upload creates a new material, even if one with the same name exists.

You can only update your own account's materials.

The Created date does not change.

When you update a material, you mark every product that uses it as out of date, so their impacts can be recalculated.

The easiest way to get the right Worldly Material IDs is to download your materials. See Material Library downloads.

 Material-Level Columns (First Row of Each Material)

| **Column** | **Required** | **Accepted Values** | **Notes** |
| --- | --- | --- | --- |
| Overwrite | No | true / false | Set to true to update a material. Needs Worldly Material ID |
| Material Name | Yes, on every row | Text | Rows with the same name form one material |
| Material Code | No | Text | Your own code, to match your systems |
| Tags | No | Text | Separate tags with commas, for example woven, FW26 |
| Created | No | Date as YYYY-MM-DD | The system uses the upload date if empty or invalid. Ignored when updating |
| Material Type | Yes | Dropdown | The material's type. Worldly uses the value on the first row |
| Tier 3 Facility, Tier 3 Country | No | Facility: Worldly ID, supplier name or account ID. Country: dropdown | The Tier 3 supplier |
| Tier 2 Facility, Tier 2 Country | No | Same as Tier 3 | The Tier 2 supplier |
| Worldly Material ID | Only with Overwrite | The material's ID | Must be empty for a new material |

 Component Columns (Every Row)

| **Column** | **Required** | **Accepted Values** | **Notes** |
| --- | --- | --- | --- |
| Base Material | Yes | Dropdown. Type a subtype name (for example "Organic Cotton") or trade name (for example "TENCEL™ Lyocell {Lenzing}") to find it | The raw material. It also sets stage P001 |
| Composition % | Yes | Number above 0, up to 100. Decimals allowed | All rows of a material must add up to exactly 100 |

Recycled content is not a separate column. Choose a recycled base material instead, for example a recycled polyester subtype.

#### Base Materials You Can Choose

The Base Material dropdown lists Worldly's material catalog: generic subtypes with industry-average data, and supplier trade names written as "Name {Contributor}". The dropdown always shows the current options and is the authoritative list. For an overview by material type, see the reference page "Available base materials for the Materials sheet". If a material you need is missing, contact Worldly support.

 Stage Columns (P002 to P006)

| **Stage** | **Textile Name** | **Supplier Tier** |
| --- | --- | --- |
| P002 | Yarn Formation | Tier 3 |
| P003 | Textile Formation | Tier 2 |
| P004 | Preparation | Tier 2 |
| P005 | Coloration | Tier 2 |
| P006 | Finishing | Tier 2 |

Each stage has three optional columns:

| **Column** | **Accepted Values** | **Notes** |
| --- | --- | --- |
| P002 Process to P005 Process | Dropdown, one value | Empty uses Worldly's default process for the base material. No Process means the stage does not happen (zero impact) |
| P006 Process | Dropdown, several values allowed | For several finishing processes |
| Yarn Size | Dropdown (dtex) | Next to P002 Process. Helps pick yarn and fabric formation processes. The system uses a default if empty |
| P00n Facility | Worldly ID (supplier name or account ID also accepted) | The facility for that stage |
| P00n Country | Dropdown | Where the stage takes place |

Choose processes that belong to the row's base material. If a process does not apply to it, the default process for that stage may be used instead. Use No Process only when you know the step does not happen. If you do not know, leave the stage empty.

The read-only columns P002 process original to P006 process original keep any text you entered that did not match a dropdown value. You do not need to fill them in.

#### How the Tier 2 and Tier 3 Columns Fill the Stages

The sheet copies supplier tier details into the stages:

Worldly copies Tier 3 Facility and Country into P002.

Worldly copies Tier 2 Facility and Country into P003, P004, P005 and P006.

This happens when your data loads and whenever you change a tier cell. It overwrites any stage facility or country already in your file. If one stage uses a different facility, edit that stage's cell in the sheet after the tier values are in. You keep your change as long as you do not edit the tier cells again.

For how FEM data is used, see Link Tier 2 and Tier 3 facilities to materials.

#### What Happens After You Submit

1. "Import Success" and "Update Success" appear as soon as Worldly has received your submission. Your rows have not been processed yet.
2. The workspace shows "Processed X of Y records". You can close the window. The import keeps running.
3. When it finishes, the workspace closes, the Material Library refreshes and you see "N Rows successfully imported".
4. The sheet removes rows that imported. Rows with problems stay, with error messages.

Fix the remaining rows and submit again. Do not resubmit rows that already imported, or you will create duplicates.

#### Troubleshooting

**Why does the system say "Validation error, please check your file and try again" when you import some materials?**

At least one material could not be imported. The system saved and removed materials without problems from the sheet. Fix the rows that are left and submit again.

**"Composition total exceeds 100 percent" or "Composition total is less than 100 percent"**

The rows with this Material Name do not add up to 100. Look for a missing row, a typo in Material Name that splits one material in two, or wrong percentages.

**"Composition is required when base material is provided" or "Composition cannot be negative"**

Enter a Composition % above 0 on every row with a Base Material.

**"Another row of this material has an error. Fix all rows of this material together."**

You can import a material only when all its rows are valid. The message points to the row and column with the real problem. Fix it and submit again.

**"Worldly Material ID is required when overwriting a material." or "Worldly Material ID is only allowed when Overwrite is enabled."**

To update, set Overwrite to true and enter the Worldly Material ID. To create, leave both empty.

**"Material not found"**

The Worldly Material ID does not match a material in your account. Check for typos, or copy the ID from a download.

**"Base Material … not found" or "could not be resolved"**

The value was probably typed or pasted and does not match the list. Click it from the dropdown again.

**"…: Organization not found - imported without a facility for this stage"**

This is a warning. It starts with the facility value you entered. Worldly could not find that facility, or the lookup was briefly unavailable. Worldly imported the material without that facility for that stage. Correct the value if needed, then update the material with Overwrite.

**"A submission is already being processed. Please wait."**

Only one submission per account runs at a time. Wait for it to finish, then submit.

**Why do I have duplicate materials?**

The system creates every material submitted without Overwrite as new. Duplicates usually come from submitting a file twice or resubmitting rows that already imported. Use Overwrite with the Worldly Material ID to change an existing material.

**Why did my stage facilities change to my Tier 2 or Tier 3 facility?**

Tier values are copied into the stages and overwrite them. Edit the stage cell after the tier values are in, and do not edit the tier cells afterwards.

**Why were my Tier 2 or Tier 3 details ignored?**

Material-level columns are read from the first row of each material only. Put them on the first row.

### Textiles Short Path Sheet

The Textiles Short Path sheet is the quickest way to add textile fabrics to your Material Library. You describe the fabric in a few terms and Worldly fills in the production processes.

#### What the Sheet Does

Instead of choosing a process for every stage, you give:

The fibers and their percentages, for example 80 percent cotton and 20 percent polyester.

The yarn size.

How the fabric is made - knit, woven or non-woven.

Whether it is coated or laminated.

Worldly fills in each fiber's production processes from its default data and calculates the impact. The sheet is for textiles only. To choose specific processes, use branded or recycled fibers, or add other material types, use the Materials sheet. See Bulk upload materials (Materials sheet).

The Textiles Short Path sheet is turned on per account. If you do not see it in the upload workspace sidebar, contact your Worldly account team.

#### How Rows Work

In the Textiles Short Path sheet, each row is one complete material. A row has six fiber slots, Base Material 1 to Base Material 6, each with its own Composition. For a two-fiber fabric, fill in slots 1 and 2 and leave the rest empty. The compositions you fill in must add up to exactly 100.

#### Step by Step - Create Textile Materials

1. Go to **Products \> Materials** then click **Import**.
2. In the workspace sidebar, open the Textiles Short Path sheet.
3. Upload a CSV file, or paste or type your data.
4. For each material, enter a Material Name. Optionally add a Material Code and Tags.
5. Choose each fiber from the Base Material dropdown and enter its Composition.
6. Choose a Yarn Size, a Textile Formation and, if relevant, Coating or Lamination.
7. Optionally, add facilities and countries for the Tier 2 and Tier 3 suppliers and stages P002 to P006.
8. Leave Overwrite and Worldly Material ID empty.
9. Fix any highlighted cells, then click **Submit data and confirm**.

"Import Success" means Worldly has received your submission. Processing continues in the background, and you can close the window. When it finishes you see "N Rows successfully imported". The sheet removes rows that imported. Rows that remain need fixing.

**![](https://support.worldly.io/hs-fs/hubfs/undefined-Nov-19-2026-10-28-11-8606-PM.png?width=670&height=408&name=undefined-Nov-19-2026-10-28-11-8606-PM.png)**

#### Step by Step - Update Textile Materials

1. Set Overwrite to true.
2. Enter the material's Worldly Material ID.
3. Fill in only what you want to change. Empty cells keep the saved values.

Keep in mind:

If you fill in any fiber slot, list all the fibers the material should have. The system removes fibers you leave out.

Only textile materials can be updated with this sheet.

When you update a material, you mark every product that uses it as out of date, so their impacts can be recalculated.

 Material Detail Columns

| **Column** | **Required** | **Accepted Values** | **When Updating, an Empty Cell…** |
| --- | --- | --- | --- |
| Overwrite | No | true / false | (leave empty to create) |
| Material Name | Yes | Text | (required) |
| Material Code | No | Text | keeps the saved code |
| Tags | No | Text, comma-separated | keeps the saved tags |
| Worldly Material ID | Only with Overwrite | The material's ID | must be empty for a new material |

 Fiber Columns (Slots 1 to 6)

| **Column** | **Accepted Values** | **Notes** |
| --- | --- | --- |
| Base Material N | Dropdown of textile fibers | Click from the list. The system does not import a value that does not match a listed fiber |
| Composition N | Number above 0, decimals allowed | Needed for every filled-in fiber. All filled-in slots add up to 100 |
| Sustainability N | Default, Recycled or Organic | Only shown on some accounts. Needs a Base Material in the same slot |

The fiber dropdown offers: Acetate/triacetate, Acrylic, Alpaca, Aramid, Carbon fiber, Cotton, Elastane/Spandex, Flax/Linen, Glass fiber, Hemp, Jute, Lyocell, Modal, Novel Polysaccharide, Nylon, Polyester, Polyethylene (PE), Polylactic Acid (PLA), Polypropylene (PP), Polytrimethylene terephthalate (PTT), Polyurethane (PU), Silk, Viscose/Rayon, Wool.

 Yarn Size, Formation and Coating Columns

| **Column** | **Accepted Values** | **If Left Empty** |
| --- | --- | --- |
| Yarn Size | 45, 70, 120, 150, 170, 200, 250, 300, 330, 370 (dtex) | The saved yarn size, or 200 for a new material |
| Textile Formation | Knit, Woven, Non-Woven | The saved formation. A new material uses Worldly's default |
| Coating or Lamination | Coating, Lamination, Yes type unknown, None | The system leaves the coating unchanged |

#### How Coating and Lamination Change Your Material

Choosing a coating or lamination adds a barrier layer as an extra component at a fixed 10 percent. The system scales down your fibers to the other 90 percent.

| **Option** | **Component Added** |
| --- | --- |
| Coating | Monolithic Coating |
| Lamination | Monolithic Laminate |
| Yes, type unknown | Monolithic Laminate, so the impact is not underestimated |
| None | Removes a coating or laminate the sheet added before |

Example - An 80 percent cotton / 20 percent polyester fabric with Coating becomes 72 percent cotton, 18 percent polyester and 10 percent Monolithic Coating. Choosing None later brings it back to 80/20.

#### Supplier and Stage Facility Columns

The stages are P002 Yarn Formation (Tier 3), and P003 Textile Formation, P004 Preparation, P005 Coloration and P006 Finishing (Tier 2). All facility and country columns are optional.

| **Column** | **Accepted Values** | **Notes** |
| --- | --- | --- |
| Tier 2 Facility, Tier 3 Facility | The facility's Worldly organization ID | The supplier for that tier |
| Tier 2 Country, Tier 3 Country | Dropdown | The supplier's country |
| P002 Facility to P006 Facility | The facility's Worldly organization ID | Must exist in Worldly |
| P002 Country to P006 Country | Dropdown | Where that stage takes place |

Tier 3 values are copied into P002, and Tier 2 values into P003 to P006. This overwrites stage values in your file. To use a different facility for one stage, edit that stage's cell after the tier values are in. When updating, an empty facility or country cell keeps the saved value. See Link Tier 2 and Tier 3 facilities to materials.

The sheet has no columns for per-stage processes, material type or created date. Use the Materials sheet if you need those.

#### Troubleshooting

**"Composition total exceeds 100 percent" or "Composition total is less than 100 percent"**

The filled-in fiber slots must add up to exactly 100. The message shows on Composition 1. Do not include the coating or laminate. Worldly adds it.

**"Composition is required when base material is provided" or "Base material is required when composition is provided"**

Each fiber slot needs both a Base Material and a Composition above 0. A slot with a Sustainability value also needs a Base Material. Fill in the missing cell or clear the slot.

**"Worldly Material Id is required to overwrite material" or "Enable Overwrite to update an existing material…"**

To update, set Overwrite to true and enter the Worldly Material ID. To create, leave both empty.

**"Material not found"**

The Worldly Material ID does not match a material in your account. Check the ID.

**"Invalid material category. Short path upload is for Textiles (TX) only."**

The material you are updating is not a textile. Update it with the Materials sheet.

**"Organization not found" or "Unable to validate organization"**

"Organization not found" means the Worldly organization ID does not match an organization. Check the ID with your supplier. "Unable to validate organization" is a temporary lookup problem. Submit again.

**Why is a fiber missing from my material?**

The system does not import a fiber typed in by hand that does not match the list. Click it again from the dropdown and update the material with Overwrite. When updating, list all fibers. The system removes any you leave out.

**Why does my material have an extra 10 percent coating or laminate?**

Coating, Lamination and "Yes, type unknown" add it automatically. To remove it, update the material with Coating or Lamination set to None.

**Why does the system say "Validation error, please check your file and try again" when you create some materials?**

At least one row could not be imported. The system saved and removed rows without problems from the sheet. Fix the rest and submit again. Do not resubmit rows that already imported, or you will create duplicates.

### Link Tier 2 and Tier 3 Facilities to Materials

Link your supplier facilities to a material's production stages so Worldly can use their Higg FEM data instead of industry-average energy data.

#### What Facility Linking Does

In the Material Library, you can link a supplier facility to each production stage of a material. When the facility has an eligible FEM, Worldly replaces the industry-average energy part of that stage with the facility's own reported energy emissions. The rest of the process's impact stays as it is.

You can link any facility that has a Worldly ID, even if it has never shared a FEM with you. The link is saved, and the stage shows why FEM data is not used.

#### How to Link Facilities in the Upload Sheets

Enter each facility's Worldly ID in these columns of the Materials sheet or the Textiles Short Path sheet:

| **Column** | **Facility** | **Fills In** |
| --- | --- | --- |
| Tier 3 Facility / Tier 3 Country | Tier 3 supplier, for example a spinner | P002 (Yarn Formation for textiles) |
| Tier 2 Facility / Tier 2 Country | Tier 2 supplier, for example a knitting or weaving mill | P003, P004, P005 and P006 |
| P002 Facility to P006 Facility, with Country | The facility for one stage | Only that stage |

The stage columns are filled in from the tier columns automatically, and this overwrites what was in them. To use a different facility for one stage, edit that stage's cell after the tier values are in. Editing a tier cell copies its value over the stages again.

The Materials sheet also accepts a supplier name or account ID. The Textiles Short Path sheet needs the facility's Worldly organization ID.

For the full sheet instructions, see Bulk upload materials (Materials sheet) and Textiles Short Path sheet.

#### What Happens When a Facility Cannot Be Found

Materials sheet - You see a warning that starts with the value you entered, for example "ABC123: Organization not found - imported without a facility for this stage". The material is imported without that facility for that stage. The same warning can appear if the lookup was briefly unavailable, so if the value is correct, update the material again later with Overwrite.

Textiles Short Path sheet - You see the error "ABC123: Organization not found" on that cell. Correct the Worldly ID and submit again.

#### Which FEM Worldly Uses

Worldly looks for the most recent FEM the facility has shared with you that passes every eligibility check. It checks newest first. You cannot choose an older year yourself.

Accepted FEM versions are FEM 2024, FEM 2025 and FEM 2026.

You can see the result in two places:

The material's Details view, which shows the FEM year and status for each stage with a linked facility, or the reason FEM data is not used.

The Detailed Material Components Report download, in the FEM Status, FEM ineligible reason and Source columns. See Material Library downloads.

**![](https://support.worldly.io/hs-fs/hubfs/undefined-Nov-19-2026-10-28-12-3608-PM.png?width=670&height=436&name=undefined-Nov-19-2026-10-28-12-3608-PM.png)**

#### Which Stages a Facility Covers

In the FEM, a facility lists the manufacturing processes it performs, such as Yarn Spinning, Knitting or Batch Dyeing. Each of those processes belongs to one lifecycle stage. A facility can only be used at the stages its reported processes belong to.

A facility is applied at the stage you link it to.

If you link it to a stage none of its processes belong to, that stage shows "No valid manufacturing process reported" and uses standard data. The facility still applies at the stages it does cover.

The raw material stage (P001) never uses FEM data.

Some processes cannot be combined with facility data. That stage shows "Process cannot be linked. Using LCA defaults". The per-type pages in Materials reference list these processes.

The page "FEM data for materials" in Materials reference lists, for each material type, the stages that accept FEM data and the FEM processes that map to them.

#### Material Types That Never Use FEM Data

These material types do not use FEM data at any stage, even if you link a facility:

- **Insulation Materials**
- **Leather**
- **Leather Alternatives**
- **Mineral Based**
- **Synthetic Leather**
- **Wood**

Their stages use standard data, adjusted for the country of manufacture where that applies.

Barriers (coatings and laminates) use FEM data only when the material also contains a textile.

Textiles, Foam, Metals, Plastics and Rubber accept FEM data at their production stages after raw materials.

#### FEM Eligibility Messages

A linked facility's FEM must pass every check. When one fails, you see one of these messages:

| **Message** | **What It Means** | **What to Do** |
| --- | --- | --- |
| FEM Not Shared | The facility has not shared its FEM with you. In the Detailed Material Components Report this shows as Supplier Not Provided | Ask the facility to share its FEM with your account |
| Account Not Active | The facility's account is not active | The facility needs to reactivate its account |
| No Recent FEM Available | The assessment is older than FEM 2024 | The facility needs to complete FEM 2024 or later |
| FEM Not Posted | The assessment is incomplete, not started or deleted | The facility needs to complete and post it |
| Facility Type Not Supported | Only Raw Material Processing, Material Production, and Component / Sub-Assembly Manufacturing facilities can be used | Facilities that only do final assembly, finishing of finished products or raw material collection cannot be used |
| Insufficient Production Volume | No production volume reported for material production, raw material processing or component/trim production | The facility needs to report production volume |
| No Valid Manufacturing Process Reported | No process reported in this material's category, for example no textiles process for a textile | The facility needs to list its processes for that category |
| Energy Not Tracked | The facility does not track energy | The facility needs to turn on energy tracking in the FEM |
| No Production Volume or Energy Data | No energy-based emissions for material production or raw material processing | The facility needs to allocate energy and volume to material production or raw material processing |

When the facility type check fails, the other checks are skipped, so you only see the root cause.

#### Other Messages on a Stage

Using country grid - FEM data could not be used, so the stage was calculated with the country of manufacture's electricity grid. When a linked facility is not eligible, Worldly still uses its country for the stage.

Using LCA defaults - FEM data could not be used, so the standard value (global-average electricity grid) was used.

Several messages can appear together on one line, separated by commas.

#### How to Make a FEM Usable

Ask the facility to complete and post a FEM 2024 or later, share it with you, track energy, and report production volume and energy data for material production.

Tier 1 final assembly facilities are linked on products and purchase orders, not on materials. See Link a final assembly (Tier 1) facility and FEM.

### Material Library Downloads

You can download your Material Library data as CSV files from Products - Materials. You can download a list of selected materials, and two impact reports.

#### The Three Downloads at a Glance

| **Download** | **Where to Find It** | **What Is Included** | **One Row Per** |
| --- | --- | --- | --- |
| Materials List | Check materials, then click Download in the bar that appears | The materials you selected | Base material (component) |
| Detailed Material Components Report | Download button at the top of the page | All materials in your library | Base material, with impacts and stage details |
| Material Impacts | Download button at the top of the page | All materials in your library | Material, with total impacts |

Downloads include only your own account's materials, and never deleted ones. Search text and tag filters in the list are not applied to downloads. To download only some materials, check them and use the Materials list.

#### Step by Step - Download Selected Materials

1. Go to **Products \> Materials**.
2. Check the materials you want. To download almost everything, check all, then uncheck the ones you do not want.
3. Click **Download** in the action bar that appears.
4. The file opens in a new tab if it is ready straight away. Otherwise a progress panel shows "Preparing 1 export".
5. When the panel shows Exports Prepared, click **Download** in the panel.

#### Step by Step - Download the Impact Reports

1. Go to **Products \> Materials**.
2. Click the **Download** button at the top right of the page.
3. Choose Detailed Material Components Report or Material Impacts.
4. Wait for the file to open, or click **Download** in the progress panel when it shows Exports Prepared.

Both reports always cover every material in your library, whatever you have selected.

**![](https://support.worldly.io/hs-fs/hubfs/undefined-Nov-19-2026-10-28-14-4744-PM.png?width=670&height=436&name=undefined-Nov-19-2026-10-28-14-4744-PM.png)**

#### Update Materials by Editing a Download

On accounts that use the Materials sheet, the Materials list uses the same columns as the sheet. You can edit it and upload it again:

1. Download the materials you want to change.
2. Edit the values. Leave overwrite set to true and keep the worldlyMaterialId values, so Worldly updates those materials instead of creating new ones.
3. Go to **Products \> Materials \> Import**, open the Materials sheet and upload the file.
4. Before you submit, check that each P004 Process cell holds only one process (P006 can hold several). Also check that stages that use a different facility from their tier are re-entered, because Tier 3 values are copied into P002 and Tier 2 values into P003 to P006.
5. Submit.

The baseMaterialName column is only for your reference. The system does not import it. See Bulk upload materials (Materials sheet).

#### Materials List Columns

On accounts that use the Materials sheet, the Materials list has one row per base material. Material-level values repeat on every row of the same material.

| **Header** | **Materials Sheet Column** | **How the Value Is Written** |
| --- | --- | --- |
| overwrite | Overwrite | Always true |
| name, code | Material Name, Material Code | As saved |
| tags | Tags | Separated by comma and space |
| created | Created | YYYY-MM-DD |
| materialType | Material Type | The material type code |
| baseMaterial | Base Material | The base material's identifier |
| baseMaterialName | (reference only) | The base material's readable name |
| composition | Composition % | The number, no % sign |
| P002Process to P006Process | P002 Process to P006 Process | "Material type - process name", or "No Process". P004 and P006 may list several, separated by commas |
| yarnSize | Yarn Size | Dtex value |
| P002Facility to P006Facility, T2Facility, T3Facility | Facility columns | Worldly organization ID, or the text originally entered |
| P002Country to P006Country, T2Country, T3Country | Country columns | Country name |
| worldlyMaterialId | Worldly Material ID | The material's ID |
| P002ProcessOriginal to P006ProcessOriginal | process original | Process text you originally entered, if it did not match the list |

On other accounts, the Materials list has an older layout with one row per material and at most four base materials. Materials created with the retired material upload may not appear in the newer download.

#### Detailed Material Components Report Columns

One row per base material of each material.

| **Column** | **Meaning** |
| --- | --- |
| Worldly Material ID | The material's ID |
| Material Name, Material Code, Tags | As you entered them. Tags are separated by commas without spaces |
| Base Material, Composition % | The base material on this row and its share |
| Sustainability Type | The base material's sustainability attribute, such as recycled or organic |
| Tier 4 Impacts | The part of the impact from raw material extraction (P001) |
| Tier 3 Impacts | The part from yarn formation (P002) |
| Tier 2 Impacts | The part from textile formation and later stages (P003 to P006) |
| Total Impacts | The base material's total global warming impact |
| P001 | The raw material process |
| P002 to P006 | The process at each stage. Several processes are separated by commas, and that stage's Country is then left blank |
| Yarn Size | For P002 and P003 only |
| P00N Facility, P00N Country | Where the stage was done |
| P00N FEM Status, P00N FEM Ineligible Reason | The facility's FEM status, and why it could not be used, for example "Supplier not provided" |
| P00N Source | Where the stage's data came from: the facility's FEM, the country's electricity grid, or "Default" |
| Account ID, Account Name | Your account |
| User Email | The person who created the material |
| Created, Updated | Dates as YYYY-MM-DD |

Some accounts also see Process Original (Imported) and Facility Original (Imported) per stage, FEM Eligible (true or false) per stage, and Auto-Assigned Notes, which show where Worldly matched a process or flagged a facility automatically.

#### Material Impacts Columns

One row per material.

| **Column** | **Meaning** |
| --- | --- |
| Material ID, Material Type, Material Name, Material Code, Tags | The material's details |
| Base Materials | All base materials, separated by commas |
| Facilities | On some accounts |
| Sustainability Composition Percent | Share of the material made of base materials with an eligible sustainability attribute, such as recycled or organic |
| Tier 4 Impacts in kgCO2e/kg | Impact from raw material extraction |
| Tier 3 Impacts in kgCO2e/kg | Impact from yarn formation |
| Tier 2 Impacts in kgCO2e/kg | Impact from textile formation and later stages |
| Total Impacts in kgCO2e/kg | Total impact per kg of material |
| Auto-Assigned Notes | On some accounts |
| Account ID, Account Name | Your account |
| Created, Creator, Modified, Modifier | Dates, and the email addresses of the people who created and last changed the material |

The headers show "CO2e" with a zero. It means CO2e. Numbers are written as calculated, without rounding. There is no Tier 1 column. Tier 1 (final assembly) belongs to products, not materials.

#### Troubleshooting

**An error says a download is pending or in progress.**

Only one download of each type can run at a time for your account. Wait for it to finish and try again. If it never finishes, contact Worldly support.

**"Download job has a status of 'Canceled' with no available file URL"**

The file was not produced. Start the download again.

**"Technical Error"**

Try again. Contact Worldly support if it keeps happening.

**Accented characters look wrong when I open the file in Excel.**

Open the CSV through Excel's data import and choose UTF-8 encoding.

**A material is missing.**

Check that it was not deleted and, for the Materials list, that you selected it.

### Material Detail Page and Deleting Materials

A material's detail page shows what the material is made of, its carbon footprint per kilogram by lifecycle stage, and which products use it. You delete materials from the Material Library list.

#### Open a Material's Detail Page

1. Go to **Products \> Materials**.
2. In the *Material Name & ID* column, click the **material's name**.

The detail page is switched on per account. If material names are not links, it is not on for your account. Contact your Worldly account team. You can still see a material's stages, processes and FEM information in the Detailed Material Components Report download (see Material Library downloads).

If the material cannot be loaded, the title shows "Material details" and the sections show "No composition data available." and "No stage data available.". Go back to the Material Library and open the material again.

**![](https://support.worldly.io/hs-fs/hubfs/undefined-Nov-19-2026-10-28-11-1784-PM.png?width=670&height=436&name=undefined-Nov-19-2026-10-28-11-1784-PM.png)**

#### What Is on the Page

The page is for viewing only. It has four sections:

| **Section** | **Where** | **What It Shows** |
| --- | --- | --- |
| Overview | Left | Composition, material type, dates and tags |
| Products | Left, below Overview | Products that use the material. Only shown when there is at least one |
| Impact by Stage | Right | Total carbon footprint per kilogram and each stage's share |
| Stages | Right, below Impact by Stage | Each stage's process, share, impact, facility, country and FEM status |

There is no edit, delete, download or recalculate button. To change a material, use the Materials sheet or the Textiles Short Path sheet (see Bulk upload materials (Materials sheet)). To download details, see Material Library downloads.

#### Overview

The table has one row per part of the material, for example per fiber in a blend:

| **Column** | **What It Shows** |
| --- | --- |
| Material | The subtype (such as a recycled or organic variant), the trade name for a contributed material, or the material name |
| Sustainability | The sustainability attribute, or - when there is none |
| Composition | Its share of the material, in percent |

Below the table are the material type with its code, for example "Textiles (TX)". The Created and Modified dates appear as YYYY-MM-DD. The page shows the material's tags.

The material type decides the lifecycle stages. Textiles, for example, have Raw Materials, Yarn Formation, Textile Formation, Preparation, Coloration and Finishing. Other types are in Materials Reference (by material type).

#### Impact by Stage

- **Total -** The global warming impact in kgCO2e/kg (kilograms of CO2 equivalent per kilogram of finished material), with two decimals. Not shown when the total is zero.
- **Bar -** One colored segment per stage, sized by its share. Hover over a segment to see the stage number, its impact and its share. If no stage has an impact yet, the bar is empty and grey.
- **Legend -** Stage 1, Stage 2 and so on, each with its share. The shares add up to 100 percent. A stage without a calculated impact shows "-percent".

Stage numbers follow the type's stage order. For textiles, Stage 1 is Raw Materials and Stage 6 is Finishing. The Stages section shows the names, with the same number and color.

Each stage's value includes its transport. A stage set to No Process has a 0 percent share. How stages are calculated is in Materials Reference (by material type).

#### Stages

Every stage of the material type is listed in order. Under each stage, one line per material in the composition shows:

| **Part of the Line** | **What It Shows** |
| --- | --- |
| Material | The material, fiber or trade name |
| Process | The process after its category (for example a spinning method after "Spinning \>"), or No Process |
| Yarn Size | For yarn stages, the size and unit, when set |
| Composition | The material's share of the blend, in percent |
| Impact | The impact in kgCO2e/kg, or "-" when there is none |

Some stages allow several processes (for textiles, Preparation and Finishing). Each gets its own line. In a blend, each fiber with a process at a stage gets its own line.

#### No Process and None

No Process means nothing is counted at that stage. Zero impact, no transport. It appears when:

You chose it, for example because the material skips coloration.

Another stage's process already covers it. Some processes, often contributed trade names, someone measured across several stages, for example a fiber whose data includes spinning. Worldly sets the stages they cover to No Process automatically, so impact is not counted twice. That impact sits in the stage where you selected the process.

The page does not say which applies. If you did not choose it, look for a multi-stage process earlier.

None means no process is recorded, so the impact shows "-". Leaving a stage empty in the upload sheets is different. The stage's default process is applied and shown here.

#### Facility, Country and FEM Status

Below each line, a factory icon shows the facility and country. If the facility has a Worldly account, click its name to open its profile. A contributed trade name without a facility may show the contributor instead. World means no facility or country is recorded.

When a facility is linked, its FEM status appears below:

| **Icon** | **What It Shows** | **Meaning** |
| --- | --- | --- |
| Check Mark | FEM with the FEM year and status | The facility's FEM data is used for this stage |
| Warning Triangle | The FEM year and status, when known, and the reason | The FEM cannot be used for this stage |
| Question Mark | The reason, then "Add to segment + campaign to request a FEM" | The FEM cannot be used yet, for a reason the facility can fix |

The question-mark reasons are Insufficient production volume, Energy not tracked and FEM not shared (the facility has not shared a FEM with you), separated by commas. How to make a FEM usable is in Link Tier 2 and Tier 3 facilities to materials.

**![](https://support.worldly.io/hs-fs/hubfs/undefined-Nov-19-2026-10-28-15-0962-PM.png?width=670&height=436&name=undefined-Nov-19-2026-10-28-15-0962-PM.png)**

#### Products That Use the Material

Each product shows its name, with its category and size below.

The most recently changed come first, up to 50. If more use the material, the page does not say so.

The page does not list removed products. With no products, the section is not shown.

When the product detail page is on for your account, names link to it (see Product detail page and your results). Otherwise, find the product in your Products list.

When you update a material, products that use it can be flagged as outdated until you recalculate them (see Outdated products and recalculation).

#### Before You Delete a Material

Deleting cannot be undone. Check the material's Products section first, or your Products list if the detail page is not on for your account. If products use it, you can still delete it and their saved results will not change. To move them to another material instead, edit each product and replace it first (see Add and edit a product).

If you only want to change the material, do not delete it. Update it with the Materials sheet, using Overwrite and its Worldly Material ID (see Bulk upload materials (Materials sheet)). That keeps its links to your products, which are then flagged as outdated so you can recalculate them.

Before deleting in bulk, download your Material Library as a backup.

#### Delete One or More Materials

1. Go to **Products \> Materials**.
2. Check the checkbox of each material to delete. You can use Search first.
3. In the action bar above the list, check the number selected, then click Delete.
4. The Delete Material dialog says "If you delete this material, then it cannot be recovered", for one material or many.
5. Click **Delete** to confirm, or **Cancel** to keep the materials. Clicking outside the dialog does not close it.

A message such as "12 Materials deleted" confirms it, and the materials leave the list. To clear a selection without deleting, click Cancel in the action bar.

The header checkbox offers Check all on this page, Check all across pages, Uncheck all on this page and Uncheck all across pages. After checking across pages, you can clear single checkboxes.

Be careful. Without a search, Check all across pages checks your whole Material Library. To delete a group, search first (by name, tags, or Tier 2 and Tier 3 supplier names and countries) and check the action bar count. That is how many will be deleted.

![](https://support.worldly.io/hs-fs/hubfs/undefined-Nov-19-2026-10-28-12-8865-PM.png?width=670&height=436&name=undefined-Nov-19-2026-10-28-12-8865-PM.png)

#### What Happens to Products That Use a Deleted Material

Products are not deleted or changed.

Saved results stay the same, for products and purchase orders. The product still lists the material by name.

The material cannot be chosen any more. It is gone from the product form, the Material Library and its downloads.

Recalculating does not update a product that still uses it, for example from the Updates available banner, because the material has no data left. Edit the product, choose another material from your Material Library or the default materials, and save.

### Troubleshooting

#### Can I Recover a Deleted Material?

No. There is no undo or restore. If you deleted one by mistake:

1. Create it again with the Materials sheet or the Textiles Short Path sheet, using a recent Material Library download if you have one.
2. Edit each product that used it and choose the new material. It has a new Worldly Material ID, so products are not linked to it automatically.
3. Contact Worldly support if you need help with many products.

#### I See "Something Went Wrong"

The deletion did not complete. Reload the page and delete any materials still listed. If it keeps happening, contact Worldly support.

#### Fewer Materials Were Deleted Than I Selected

Some were not deleted, for example because they were being changed at the same time. Reload the page and delete the rest again.

### Import Your Higg MSI Custom Materials

Import MSI Materials copies your company's Higg MSI custom materials into the Material Library, so you can keep building and maintaining them there. Account owners, admins and editors on accounts with the Product Impact Calculator (PIC) can run it.

#### What the Import Does

The import takes all your company's Higg MSI custom materials in one run. You cannot choose individual materials. It leaves out draft materials in Higg MSI, deleted materials, and materials shared with you by another company.

Each imported material becomes a new material in the Material Library. Your Higg MSI materials stay unchanged and are not removed. They still work where you use them today.

The import does not change your products. Products that use a Higg MSI custom material keep using it. They are not switched to the Material Library copy, and they are not flagged for an update. To use the copy, choose it when you add or edit the product (see Add and edit a product).

For why the Material Library is the place to create custom materials if your company has PIC, see Material Library and custom materials.

#### Find the Button

Go to **Products \> Materials**. Import MSI Materials is in the page header, next to Import and Download.

The button is enabled per account. If you do not see it, contact your Worldly account team.

Import MSI Materials is not the same as Import. Import opens the material upload, where you create or update materials from a sheet (see Bulk upload materials (Materials sheet)). Import MSI Materials reads your existing Higg MSI custom materials and needs no file.

**![](https://support.worldly.io/hs-fs/hubfs/undefined-Nov-19-2026-10-28-13-4990-PM.png?width=670&height=276&name=undefined-Nov-19-2026-10-28-13-4990-PM.png)**

#### Before You Start

The import starts as soon as you click the button. There is no confirmation step, and it always covers every non-draft custom material of your company. So first check in Higg MSI that the materials you want are finished, not drafts. Also check that each material's base material composition adds up to exactly 100 percent.

 Import Your Materials

1. Go to **Products \> Materials**.
2. Click Import MSI Materials. The import starts straight away and runs in the background. The button stays unavailable while it runs.
3. Wait for the result. You can keep working on the page. When it finishes, you see one of these messages:
4. "MSI materials synced successfully" - The import finished. The list reloads and shows the imported materials.
5. "Something went wrong syncing MSI materials" - No material could be imported, or the import stopped. See Troubleshooting below.
6. "MSI material import is taking longer than expected. It is still running in the background - check back soon." - Come back later and reload the page.
7. Check the imported materials in the list. They have the same names as in Higg MSI.

Only one import runs at a time for your account. If you click the button while one is running, for example after reloading the page, no second import starts. The page follows the running one. Large libraries can take a while.

#### What Is Copied and What Is Not

Each imported material gets:

| **Copied** | **Details** |
| --- | --- |
| Name | The Higg MSI material's name |
| Material Code | The Higg MSI material code, or the name when there is no code |
| Material Type | As in Higg MSI |
| Base Materials and Composition | Same percentages, same order. A base material that appears twice stays as two entries |
| Production Processes | Stage by stage for each base material. Each Higg MSI process is matched to the current Material Library process |

These are not copied:

Facilities and countries for the production stages. Link facilities afterwards (see Link Tier 2 and Tier 3 facilities to materials).

Tags.

The imported material is calculated with the Material Library's own data, so its impact can differ from its impact in Higg MSI.

#### Run the Import Again

You can run the import again at any time. Materials imported before are updated from their current version in Higg MSI. Materials you add to Higg MSI since the last run get added. If you deleted a Material Library copy, the system creates it again as a new material.

Because every imported copy is updated each time, decide where you will maintain each material once it is imported.

#### Do I Have to Import My Higg MSI Materials?

No. Higg MSI custom materials keep working in your products after you get the Material Library. The import is a convenient way to start with materials you already built.

Reasons to import:

To maintain your materials in the Material Library, where you build products.

To link a facility to each production stage, so its FEM data is used.

To use the materials in products that need Material Library materials, for example for the French Eco-Score.

If you only need a few materials, you can create them in the Material Library instead, with the Materials sheet or the Textiles Short Path sheet (see Bulk upload materials (Materials sheet) and Textiles Short Path sheet).

#### TroubleshootingSome Higg MSI Materials Are Missing After the Import

"MSI materials synced successfully" means the import finished and at least part of it worked. It does not list materials that could not be imported. Check each missing material in Higg MSI:=

Is it a draft? Finish and save it.

Is it shared by another company? Worldly imports only your company's own materials.

Does its base material composition add up to exactly 100 percent? If not, correct it.

Does it use a base material or process that is no longer available in the current Higg MSI version? Replace it.

Then click Import MSI Materials again. Earlier imports are updated and the corrected materials are added.

#### I See "Something Went Wrong Syncing MSI Materials"

No material could be imported, or the import stopped. Wait a few minutes, reload the page and try again.

#### Materials Are Still Missing

Contact Worldly support with the names of the missing Higg MSI materials. You can also create a missing material directly in the Material Library with the Materials sheet or the Textiles Short Path sheet.

### Materials Reference

The Materials Reference is a set of pages, one per material type, that list every material in the Material Library with its subtypes, trade names, lifecycle stages and processes.

#### What the Reference Pages Are For

Use the reference pages to look up an exact material, stage or process before you build a material, or to understand a result. For example, you can check which processes are offered at a stage, which one is the default, whether FEM data can be used there, and whether No process is allowed.

Material codes (such as LE0001), stage IDs (such as TX-P002) and process IDs (such as PR0804000223) are included so you can find an exact item.

#### Terms Used on the Pages

- **Material type -** The top-level family, for example Textiles or Leather.
- **Material -** A specific material within a type, for example Cotton within Textiles. The same name can exist in two types (Nylon is both a Textile and a Plastic). Those are separate materials.
- **Generic subtype (industry average) -** A variant of a material that uses representative data, not tied to a company, for example Organic Cotton.
- **Trade name (contributed material) -** A supplier's branded material using its own data, written as "Name {Contributor}", for example "TENCEL™ Lyocell {Lenzing}".
- **Lifecycle stage -** A step in making the material, from raw materials to finishing. Each type has its own ordered stages.
- **Process -** The operation chosen at a stage, for example Ring Spinning or Knitting.
- **Default -** The process used when you do not choose one. It is the industry-average choice.
- **Alternate -** Any other process you can choose at a stage, including trade names.
- **No process -** Nothing happens at that stage, so it adds zero impact and no transport. Leaving a stage empty is different. The default process is used. Choose No process only when you know the step does not happen.
- **Covers multiple stages -** Some trade names were measured across more than one stage. When you choose one, the later stages show zero impact so nothing is counted twice.
- **Constituent and blended stages -** Constituent stages are chosen per fiber in a blend (for textiles: Raw Materials and Yarn Formation). Blended stages apply to the whole blend (fabric formation onwards).

#### How to Read a Material Type Page

Each page follows the same order:

1. Material type section - The type's lifecycle stages in order, with their stage IDs. A stage can be marked as a constituent stage, or as one where you can choose more than one process. It then lists the materials in the type.
2. One section per material - A short summary with the number of subtypes and trade names, whether FEM data can be linked, and search terms (other names people use for the material).
3. Generic subtypes - Each subtype with the stage and process you select at, its process ID, a description, the geography of the data and the data source. The default subtype is marked.
4. Contributed trade names - Each trade name with its contributor, stage, process ID, description, geography and source.
5. Lifecycle stages and processes - For each stage, the processes you can choose, the default, whether FEM data can be applied (and which processes cannot use it), how the country of manufacture changes the result, and whether you can choose No process.

Long lists are split into parts, named for example "(part 1 of 2: first item to last item)".

#### How a Material's Impact Is Calculated

Worldly reports a material's global warming impact in kg CO2e per kg of finished material. The total is the sum of all its stages, weighted by each fiber's share in a blend. Each stage uses the first of these that applies:

1. Supplier facility data (FEM) - If an eligible facility is linked to the stage, its own energy emissions replace the industry-average energy part. See Link Tier 2 and Tier 3 facilities to materials.
2. Country-adjusted data - If a country of manufacture is set and the process data is split into energy parts, electricity is recalculated with that country's grid.
3. Standard value - Otherwise the process's published value, which assumes the global-average grid.

The raw materials stage always uses the global-average grid and never uses FEM data. The calculation also adds material losses (earlier stages process more than 1 kg to end with 1 kg) and a 200 km truck transport leg at each stage after raw materials.

#### The Reference Pages

One page per material type:

- [Textiles](https://support.worldly.io/materials-eference-textiles?hsLang=en)
- [Plastics](https://support.worldly.io/materials-reference-plastics?hsLang=en)
- [Leather](https://support.worldly.io/material-library-materials-reference-leather?hsLang=en)
- [Metals](https://support.worldly.io/material-library-materials-reference-metals?hsLang=en)
- [Rubber](https://support.worldly.io/materials-reference-rubber?hsLang=en)
- [Foam](https://support.worldly.io/material-library-materials-reference-foam?hsLang=en)
- [Synthetic Leather](https://support.worldly.io/materials-reference-synthetic-leather?hsLang=en)
- [Barriers (coatings and laminates)](https://support.worldly.io/material-libary-materials-reference-barriers?hsLang=en)
- [Insulation Materials](https://support.worldly.io/material-library-materials-eference-insulation-materials?hsLang=en)
- [Wood](https://support.worldly.io/materials-reference-wood?hsLang=en)
- [Mineral Based](https://support.worldly.io/material-library-materials-reference-mineral-based?hsLang=en)
- [Leather Alternatives](https://support.worldly.io/material-library-materials-reference-leather-alternatives?hsLang=en)

Two supporting pages:

FEM data for materials - How linked facility data is used, the eligibility checks and messages, and which material types and stages accept FEM data.

Process glossary - Definitions of the process categories and individual processes you can choose at each stage, and how No process works.

For the list of base materials you can pick in the Materials sheet, see "Available base materials for the Materials sheet" and Bulk upload materials (Materials sheet).

[![Worldly logo](https://support.worldly.io/hs-fs/hubfs/Worldly%20Media%20Kit/Worldly%20Logos/Worldly_LogoTM_Red.png?width=120&height=30&name=Worldly_LogoTM_Red.png "Worldly logo")](https://www.worldly.io)

© 2026 Worldly. All Rights Reserved

[Terms of use](https://worldly.io/terms-of-use/)  |  [DPA](https://worldly.io/data-privacy-addendum/)  |  [Privacy Policy](https://worldly.io/privacy-policy/)  |  [Cookie notice](https://worldly.io/cookie-notice/)

 

<https://www.linkedin.com/company/worldlyio> <https://www.youtube.com/@worldlyio>