Skip to content
  • There are no suggestions because the search field is empty.

Materials Reference: Textiles

Every Textiles material in MatLib (24 materials: Acetate, Triacetate, Acrylic, Alpaca, Aramid, Carbon, Cotton...) comes with generic subtypes, lifecycle stages, default and alternate processes, and contributed trade names, from MSI 3.12.


Also known as: Textiles, Textiles materials, MatLib, material subtypes, lifecycle stages, processes, trade names, Acetate, Triacetate, Acrylic, Alpaca, Aramid, Carbon, Cotton, Elastane/Spandex, Flax, Glass, Hemp, Jute, Lyocell, Modal, Novel Polysaccharide, Nylon, Polyester, Polyethylene (PE), Polylactic Acid (PLA), Polypropylene (PP), Polytrimethylene Terephthalate (PTT), Polyurethane (PU), Silk, Viscose/Rayon, Wool.


Material Type: Textiles


Metadata: material type code TX; 24 materials; MSI 3.12


Textiles materials in MatLib go through these lifecycle stages, in order:


  • Raw Materials (TX-P001): constituent stage
  • Yarn Formation (TX-P002): constituent stage
  • Textile Formation (TX-P003): blended stage
  • Preparation (TX-P004): blended stage, users click more than one process
  • Coloration (TX-P005): blended stage
  • Finishing (TX-P006): blended stage, users click more than one process

Materials in Textiles: Acetate, Triacetate, Acrylic, Alpaca, Aramid, Carbon, Cotton, Elastane/Spandex, Flax, Glass, Hemp, Jute, Lyocell, Modal, Novel Polysaccharide, Nylon, Polyester, Polyethylene (PE), Polylactic Acid (PLA), Polypropylene (PP), Polytrimethylene Terephthalate (PTT), Polyurethane (PU), Silk, Viscose/Rayon, Wool.


Acetate, Triacetate (Textiles)


Metadata: material type Textiles (TX); material code TX0017; MSI 3.12; fiber origin regenerated cellulosic


Acetate, Triacetate functions as a Textiles material in MatLib. It has 1 generic subtype (Acetate, Triacetate) and 6 contributed trade names from Eastman.


Supplier facility (FEM) data users link at: Yarn Formation (TX-P002), Textile Formation (TX-P003), Preparation (TX-P004), Coloration (TX-P005), Finishing (TX-P006). Raw materials always use MSI data.


Also known as / search terms: acele, acetate, acetate braid, acetate charmeuse, acetate crepe, acetate fabric, acetate faille, acetate fiber, acetate fibre, acetate filament, acetate filament yarn, acetate georgette, acetate jacquard, acetate jersey, acetate lining, acetate ribbon, acetate satin, acetate staple fiber, acetate taffeta, acetate tow, acetate trim, acetate twill, acetate velvet, acetate yarn, acetyl cellulose, arnel, arnel triacetate, ca, ca fiber, cab, cda, celaire, celanese, cellulose acetate, cellulose acetate butyrate, cellulose di-acetate, cellulose diacetate, cellulose triacetate, chromspun, cta, cta fiber, diacetate, dicel, dope-dyed acetate, estron, lanese, lansil, primary acetate, rhodia acetate, secondary acetate, seraceta, silene, silkara, soalon, solution-dyed acetate, tenite, tri-acetate, triacetate, triacetate fabric, triacetate lining, triacetate yarn, tricel, tricel fabric, tubize


Acetate, Triacetate: generic subtypes (industry average)


  • Acetate, Triacetate: users click at Raw Materials (TX-P001) via Regeneration; default representative for Acetate, Triacetate. (Process ID: PR0804000005)
    • Description: Manufacturers acetylate and regenerate cellulose from pine, spruce or cotton linters. Data comes from GaBi process for Sodium Carboxymethyl Cellulose (CMC), which manufacturers produce in a Williamson ether synthesis from alkali cellulose with sodium chloro-acetate or with chloroacetic acid itself. This reacts in-situ with caustic soda to form the salt.
    • Characteristic: MMCF
    • Geography of data: US
    • Data source: Data from Sphera: Sodium carboxymethylcellulose (from cotton/cellulose). https://lcadatabase.sphera.com/2024/xml-data/processes/09815105-153e-45f3-9104-eab36aa27d60.xml

Acetate, Triacetate: contributed trade names (part 1 of 3: Cellulosic Filament Yarn Naia(TM) Renew {Eastman})


  • Cellulosic Filament Yarn Naia(TM) Renew {Eastman}, contributed by Eastman: users check at Raw Materials (TX-P001) as Mass Balance. (Process ID: PR0804000643)
    • Description: Eastman Naia(TM) Renew cellulosic yarn functions as a cellulose diacetate-based continuous filament yarn sourced from sustainably sourced wood pulp and acetyl sourced from recycled waste plastics. Naia(TM) Renew manufacturers produce in Kingsport, TN in an optimized low-impact manufacturing process with a low tree-to-fiber carbon and water footprint. Naia(TM) Renew comes from 60 percent sustainable certified wood pulp and 40 percent certified* waste plastics. Naia(TM) Renew represents a possible solution through Eastman's patented carbon renewal technology which uses waste plastics as a feedstock in their production process, resulting in a reduction of greenhouse gas emissions. Naia(TM) Renew also incorporates solar and wind Renewable Energy Credits to further reduce environmental footprint by an additional circa 35 percent. Naia(TM) Renew comes from a safe closed-loop process where manufacturers recycle solvents back into the system for reuse and with no hazardous chemicals listed on the ZDHC Manufacturing Restricted Substances List. Naia(TM) also carries certification as biodegradable in soil and freshwater environments, as well as compostable under industrial settings. https://naia.eastman.com/home *Naia(TM) Renew recycled content achieves through allocation of recycled plastics using an ISCC-certified mass balance process.
    • Sustainability attribute: Mass Balanced
    • Characteristic: MMCF
    • Geography of data: US
    • Data source: Submitted by Eastman.
    • Covers multiple stages: this process also includes Yarn Formation (TX-P002), so those stages are bundled into it

Acetate, Triacetate: contributed trade names (part 2 of 3: Cellulosic Fiber Naia(TM) Renew {Eastman})


This part continues the list for Acetate, Triacetate: contributed trade names.


  • Cellulosic Fiber Naia(TM) Renew {Eastman}, contributed by Eastman: users check at Raw Materials (TX-P001) as Mass Balance. (Process ID: PR0804000642)
    • Description: Eastman Naia(TM) Renew cellulosic fiber functions as a cellulose diacetate-based staple fiber sourced from sustainably sourced wood pulp and acetyl sourced from recycled waste plastics. Naia(TM) Renew manufacturers produce in Kingsport, TN in an optimized low-impact manufacturing process with a low tree-to-fiber carbon and water footprint. Naia(TM) Renew comes from 60 percent sustainable certified wood pulp and 40 percent certified* waste plastics. Naia(TM) Renew represents a possible solution through Eastman's patented carbon renewal technology which uses waste plastics as a feedstock in their production process, resulting in a reduction of greenhouse gas emissions. Naia(TM) Renew also incorporates solar and wind Renewable Energy Credits to further reduce environmental footprint by an additional circa 35 percent. Naia(TM) Renew comes from a safe closed-loop process where manufacturers recycle solvents back into the system for reuse and with no hazardous chemicals listed on the ZDHC Manufacturing Restricted Substances List. Naia(TM) also carries certification as biodegradable in soil and freshwater environments, as well as compostable under home and industrial settings. https://naia.eastman.com/home *Naia(TM) Renew recycled content achieves through allocation of recycled plastics using an ISCC-certified mass balance process.
    • Sustainability attribute: Mass Balanced
    • Characteristic: MMCF
    • Geography of data: US
    • Data source: Submitted by Eastman.
    • Covers multiple stages: this process also includes Yarn Formation (TX-P002), so those stages are bundled into it

Acetate, Triacetate: contributed trade names (part 3 of 3: Cellulosic Filament Yarn Naia(TM) {Eastman} to Naia Renew {Eastman})


This part continues the list for Acetate, Triacetate: contributed trade names.


  • Cellulosic Filament Yarn Naia(TM) {Eastman}, contributed by Eastman: users check at Raw Materials (TX-P001) as Regeneration. (Process ID: PR0804000511)
    • Description: Eastman Naia(TM) cellulosic yarn functions as a cellulose diacetate-based continuous filament yarn that manufacturers make from sustainably sourced wood pulp. Naia(TM) manufacturers produce in Kingsport, TN in an optimized low-impact manufacturing process with a low tree-to-fiber carbon and water footprint. Naia(TM) comes from a safe closed-loop process where manufacturers recycle solvents back into the system for reuse and with no hazardous chemicals listed on the ZDHC Manufacturing Restricted Substances List. Naia(TM) also carries certification as biodegradable in soil and freshwater environments, as well as compostable under home and industrial settings. https://naia.eastman.com/home
    • Characteristic: MMCF
    • Geography of data: US
    • Data source: Submitted by Eastman.
    • Covers multiple stages: this process also includes Yarn Formation (TX-P002), so those stages are bundled into it
  • Cellulosic Fiber Naia(TM) {Eastman}, contributed by Eastman: users check at Raw Materials (TX-P001) as Regeneration. (Process ID: PR0804000532)
    • Description: Eastman Naia(TM) cellulosic fiber functions as a staple fiber product that manufacturers use to make spun yarns. Yarns containing Naia(TM) cellulosic fiber work with various knitting and weaving processes to produce fabrics for textile and apparel applications. Eastman Naia(TM) cellulosic fiber originates from renewable wood pulp, sourced exclusively from sustainably managed forests. Manufacturers produce in a closed-loop process in Kingsport, TN as part of Eastman's Acetate Fibers Manufacturing Division. https://naia.eastman.com/home
    • Characteristic: MMCF
    • Geography of data: US
    • Data source: Submitted by Eastman.
    • Covers multiple stages: this process also includes Yarn Formation (TX-P002), so those stages are bundled into it
  • Naia {Eastman}, contributed by Eastman: users check at Yarn Formation (TX-P002) as Spinning. (Process ID: PR0804000574)
    • Description: empty process - spinning included in raw material preparation. https://naia.eastman.com/home
    • Geography of data: Global/generic
    • Data source: Submitted by Eastman.
  • Naia Renew {Eastman}, contributed by Eastman: users check at Yarn Formation (TX-P002) as Spinning. (Process ID: PR0804000644)
    • Description: empty process - spinning included in raw material preparation. https://naia.eastman.com/home
    • Geography of data: US
    • Data source: Submitted by Eastman.

Acetate, Triacetate: lifecycle stages and processes (part 1 of 2: Raw Materials (TX-P001) to Preparation (TX-P004))


  • Raw Materials (TX-P001)
    • Regeneration: Regeneration; trade names: Cellulosic Filament Yarn Naia(TM) {Eastman}, Cellulosic Fiber Naia(TM) {Eastman}
      • turns Wood Pulp into Fiber/Yarn
    • Mass Balance: trade names: Cellulosic Filament Yarn Naia(TM) Renew {Eastman}, Cellulosic Fiber Naia(TM) Renew {Eastman}
      • turns Wood Pulp into Yarn/Fiber
    • Default at this stage: Regeneration
    • Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
  • Yarn Formation (TX-P002)
    • Spinning: Open-End Spinning, Ring Spinning, Melt-Spinning - Textured, Melt-Spinning - Untextured; trade names: Naia {Eastman}, Naia Renew {Eastman}
      • yarn size options from 45 to 500 DTEX; turns Fiber into Spun Yarn/Filament Yarn; output goes to Weaving, Knitting
    • Default at this stage: Melt-Spinning - Textured
    • Supplier facility (FEM) data: users apply at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Naia {Eastman}, Naia Renew {Eastman}
    • Country of manufacture: changes the electricity part of Open-End Spinning, Ring Spinning, Melt-Spinning - Textured, Melt-Spinning - Untextured; other processes here keep their standard MSI value
    • "No process" users check at this stage
  • Textile Formation (TX-P003)
    • Knitting: Knitting
      • yarn size options from 45 to 370 DTEX; turns Yarn into Greige Fabric
    • Weaving: Weaving
      • yarn size options from 45 to 370 DTEX; turns Yarn into Greige Fabric
    • Non-Woven: Needle Punching
      • turns Yarn into Greige Fabric
    • Default at this stage: Knitting
    • Supplier facility (FEM) data: users apply at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Needle Punching
    • Country of manufacture: changes the electricity part of Knitting, Weaving; other processes here keep their standard MSI value
    • "No process" users check at this stage
  • Preparation (TX-P004)
    • Preparation: Scouring
      • turns Greige Fabric into Prepared Fabric; users apply to the output of Knitting, Weaving
    • Default at this stage: Scouring
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: does not change the result at this stage
    • "No process" users check at this stage

Acetate, Triacetate: lifecycle stages and processes (part 2 of 2: Coloration (TX-P005) to Finishing (TX-P006))


This part continues the list for Acetate, Triacetate: lifecycle stages and processes.


  • Coloration (TX-P005)
    • Dyeing: Batch Dyeing - Disperse or Cationic, Continuous Dyeing - Direct, Sulfur, Vat or Reactive
      • dye types: Disperse or Cationic; turns Prepared Fabric into Dyed Fabric
    • Default at this stage: Batch Dyeing - Disperse or Cationic
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" users check at this stage
  • Finishing (TX-P006)
    • Chemical Finishing: Pad-Dry or Exhaust-Dry, Weighting or Hand Building, Pad-Dry-Cure or Exhaust-Dry-Cure, Foam-Dry-Cure or Spray-Dry-Cure, Foam or Spray-Dry
      • turns Dyed Fabric into Finished Fabric
    • Mechanical Finishing: Sueding or Sanding, Brushing or Buffing, Calendering, Pressing or Ironing, Schreinering, Sanforizing, Embossing, Compacting, Heat Setting, Heat Sealing, Milling, Shearing, Napping
      • turns Dyed Fabric into Finished Fabric
    • Printing: Digital Printing, Screen Printing, Burnout Printing
      • turns Dyed Fabric into Finished Fabric
    • Drying: Heat Drying
      • turns Dyed Fabric into Finished Fabric
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of Weighting or Hand Building, Sueding or Sanding, Foam-Dry-Cure or Spray-Dry-Cure, Brushing or Buffing, Calendering, Pressing or Ironing, Schreinering, Embossing, Heat Setting, Screen Printing, Heat Sealing, Burnout Printing, Milling, Shearing, Napping, Foam or Spray-Dry; other processes here keep their standard MSI value
    • "No process" users check at this stage

Acrylic (Textiles)


Metadata: material type Textiles (TX); material code TX0005; MSI 3.12; fiber origin synthetic


Acrylic functions as a Textiles material in MatLib. It has 1 generic subtype (Acrylic PAN) and 3 contributed trade names from Thai Acrylic fiber Co. Ltd., AKSA.


Supplier facility (FEM) data users link at: Yarn Formation (TX-P002), Textile Formation (TX-P003), Preparation (TX-P004), Coloration (TX-P005), Finishing (TX-P006). Raw materials always use MSI data.


Also known as / search terms: acrilan, acrylic boucle, acrylic chenille, acrylic fabric, acrylic faux fur, acrylic felt, acrylic fiber, acrylic fibre, acrylic fleece, acrylic jersey, acrylic knit, acrylic pile, acrylic rib, acrylic roving, acrylic sherpa, acrylic staple fiber, acrylic sweater, acrylic textile, acrylic top, acrylic tow, acrylic yarn, beslon, cashmilon, courtelle, creslan, crylor, dolan, dralon, exlan, faux fur acrylic, gel-dyed acrylic, hb acrylic, hi-bulk acrylic, kanecaron, kanekalon, leacril, mac, mod-acrylic, modacrylic, orlon, pac, pan, pan fiber, polyacrylic, polyacrylonitrile, producer-colored acrylic, protex, ridrella, sayelle, sef, solution-dyed acrylic, sunbrella, toyokalon, vonnel, zefran


Acrylic: generic subtypes (industry average)


  • Acrylic PAN: users click at Raw Materials (TX-P001) via Polymerization; default representative for Acrylic. (Process ID: PR0804000007)

Acrylic: contributed trade names


  • Regel(TM) Recycled Acrylic Fiber {Thai Acrylic Fiber Co. Ltd.}, contributed by Thai Acrylic fiber Co. Ltd.: users check at Raw Materials (TX-P001) as Recycling. (Process ID: PR0804000763)
    • Description: The product Regel Acrylic Fiberis comes from virgin polymer and waste polymer. The product has a composition of 50 percent virgin content and 50 percent recycled content in it. Regel(TM) also functions as a GRS certified acrylic fibre. https://regel.world/
    • Sustainability attribute: Recycled
    • Characteristic: Synthetic
    • Geography of data: Thailand
    • Data source: Data submitted by Thai Acrylic Fibre Co. Ltd.
  • Acrylic Tow {AKSA}, contributed by AKSA: users check at Raw Materials (TX-P001) as Polymerization. (Process ID: PR0804000771)
    • Description: The inventory of the LCA study draws from the 2020 production figures for acrylic tow manufactured by AKSA in their Yalova Plant in Turkey. The analysis includes preparation, transport and processes of raw material at first and the subsequent operations during product manufacturing. The AKSA manufacturing process relies on wet spinning process. The fiber has a kidney shaped cross-section. AKSA produces tow, top or staple fiber in both ecru and in a broad range of colours by gel dying, dope dying and continuous tow dying. Natural gas and coal get used in the production process. https://www.aksa.com/en/
    • Characteristic: Synthetic
    • Geography of data: Turkey
    • Data source: Data submitted by AKSA.
  • Radianza(TM) Acrylic Fiber {Thai Acrylic Fiber Co. Ltd.}, contributed by Thai Acrylic fiber Co. Ltd.: users check at Raw Materials (TX-P001) as Polymerization. (Process ID: PR0804000660)
    • Description: The submission covers producing 1 kg of flat-knit garment with 100 percent Radianza(TM) fibre. Radianza(TM) functions as a gel-dyed fibre, therefore in the process the need for yarn dyeing or fabric dyeing or any other conventional dyeing completely disappears. Gel-dyeing of Radianza(TM) consumes significantly less water and other resources and hence contributes positively towards improving the sustainability index of a garment. For more info visit: https://www.radianza.world/about-radianza/
    • Characteristic: Synthetic
    • Geography of data: Thailand
    • Data source: Data submitted by Thai Acrylic Fibre Co. Ltd.
    • Covers multiple stages: this process also includes Preparation (TX-P004), Coloration (TX-P005), so those stages are bundled into it

Acrylic: lifecycle stages and processes (part 1 of 2: Raw Materials (TX-P001) to Coloration (TX-P005))


  • Raw Materials (TX-P001)
    • Recycling: trade names: Regel(TM) Recycled Acrylic Fiber {Thai Acrylic Fiber Co. Ltd.}
      • turns Fossil Fuel + Recycled into Polymer
    • Polymerization: Polymerization; trade names: Acrylic Tow {AKSA}, Radianza(TM) Acrylic Fiber {Thai Acrylic Fiber Co. Ltd.}
      • turns Fossil Fuel into Polymer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
  • Yarn Formation (TX-P002)
    • Extrusion: Open-End Spinning, Ring Spinning
      • yarn size options from 45 to 370 DTEX; turns Polymer into Spun Yarn; output goes to Knitting, Weaving
    • Spinning: Microfiber Spinning, Melt-Spinning - Textured, Melt-Spinning - Untextured
      • yarn size options from 0 to 500 DTEX; turns Polymer into Spun Yarn/Filament Yarn
    • Default at this stage: Ring Spinning
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" users check at this stage
  • Textile Formation (TX-P003)
    • Knitting: Knitting
      • yarn size options from 45 to 370 DTEX; turns Yarn into Greige Fabric
    • Non-Woven: Needle Punching
      • turns Yarn into Greige Fabric
    • Weaving: Weaving
      • yarn size options from 45 to 370 DTEX; turns Yarn into Greige Fabric
    • Default at this stage: Knitting
    • Supplier facility (FEM) data: users apply at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Needle Punching
    • Country of manufacture: changes the electricity part of Knitting, Weaving; other processes here keep their standard MSI value
    • "No process" users check at this stage
  • Preparation (TX-P004)
    • Preparation: Scouring, Heat Setting
      • turns Greige Fabric into Prepared Fabric
    • Default at this stage: Scouring
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" users check at this stage
  • Coloration (TX-P005)
    • Dyeing: Continuous Dyeing - Disperse or Cationic, Solution Dope Dyeing, Batch Dyeing - Disperse or Cationic
      • dye types: Disperse or Cationic; turns Prepared Fabric into Dyed Fabric
    • Default at this stage: Batch Dyeing - Disperse or Cationic
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" users check at this stage

Acrylic: lifecycle stages and processes (part 2 of 2: Finishing (TX-P006))


This part continues the list for Acrylic: lifecycle stages and processes.


  • Finishing (TX-P006)
    • Chemical Finishing: Foam-Dry-Cure or Spray-Dry-Cure, Pad-Dry-Cure or Exhaust-Dry-Cure, Weighting or Hand Building, Pad-Dry or Exhaust-Dry, Foam or Spray-Dry
      • turns Dyed Fabric into Finished Fabric
    • Mechanical Finishing: Milling, Calendering, Schreinering, Heat Sealing, Sanforizing, Pressing or Ironing, Sueding or Sanding, Embossing, Shearing, Compacting, Heat Setting, Brushing or Buffing, Napping
      • turns Dyed Fabric into Finished Fabric
    • Printing: Digital Printing, Burnout Printing, Screen Printing
      • turns Dyed Fabric into Finished Fabric
    • Drying: Heat Drying
      • turns Dyed Fabric into Finished Fabric
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of Foam-Dry-Cure or Spray-Dry-Cure, Milling, Calendering, Schreinering, Heat Sealing, Pressing or Ironing, Burnout Printing, Weighting or Hand Building, Sueding or Sanding, Embossing, Shearing, Heat Setting, Screen Printing, Brushing or Buffing, Foam or Spray-Dry, Napping; other processes here keep their standard MSI value
    • "No process" users check at this stage

Alpaca (Textiles)


Metadata: material type Textiles (TX); material code TX0018; MSI 3.12; fiber origin natural animal


Alpaca functions as a Textiles material in MatLib. It has 1 generic subtype (Alpaca Fleece) and 0 contributed trade names.


Supplier facility (FEM) data users link at: Yarn Formation (TX-P002), Textile Formation (TX-P003), Preparation (TX-P004), Coloration (TX-P005), Finishing (TX-P006). Raw materials always use MSI data.


Also known as / search terms: alpaca blend, alpaca boucle, alpaca chenille, alpaca cloth, alpaca coat, alpaca cotton blend, alpaca felt, alpaca felted, alpaca fiber, alpaca fibre, alpaca fleece, alpaca fleece blanket, alpaca glove, alpaca hair, alpaca jersey, alpaca knit, alpaca poncho, alpaca roving, alpaca scarf, alpaca shawl, alpaca silk blend, alpaca sliver, alpaca sock, alpaca staple, alpaca sweater, alpaca textile, alpaca top, alpaca twill, alpaca vicuna, alpaca wool, alpaca wool blend, alpaca woven, alpaca yarn, andean alpaca, baby alpaca, baby alpaca yarn, bolivian alpaca, certified alpaca, huacaya alpaca, inca tops, michell alpaca, paco-vicuna, peruvian alpaca, peruvian alpaca wool, prosur alpaca, ras alpaca, responsible alpaca standard, royal alpaca, royal baby alpaca, superfine alpaca, suri alpaca, suri alpaca yarn, ultra-fine alpaca, wp


Alpaca: generic subtypes (industry average)


  • Alpaca Fleece: users click at Raw Materials (TX-P001) via Scouring; default representative for Alpaca. (Process ID: PR0804000286)
    • Description: This dataset represents a low intensity alpaca production system in Peru. More than 80 percent of the worlds alpaca population exists in highlands of Peru (FAO Stat 2017). 85 percent of the alpacas operate under smallholders with less than 50 animals each (FAO 2009). The dataset relies on the following assumptions: the animals get fed exclusively on pastures, no pasture management (no cutting, no fertilizer application) exists, the animals get shorn once a year manually, one animal produces 1.5 to 2.8 kg of high quality fleece (1st cut, FAO 2009), value assumed in this model is 2.3kg, enteric methane emissions get calculated based on data from Dittmann et al 2014, methane and nitrous oxide emissions from manure get calculated based on the IPCC 2006 protocol, dung gets collected for combustion purposes (50 percent of available nitrogen removed)
    • Characteristic: Animal-Based
    • Geography of data: Peru
    • Data source: Data from Sphera: Alpaca fleece (washed) at harbour https://lcadatabase.sphera.com/2024/xml-data/processes/a0e6d58e-e727-4196-bc4e-7d810abeb537.xml

Alpaca: lifecycle stages and processes (part 1 of 2: Raw Materials (TX-P001) to Coloration (TX-P005))


  • Raw Materials (TX-P001)
    • Animal Husbandry: Scouring
      • turns Greasy Wool into Cleaned Fiber
    • Default at this stage: Scouring
    • Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
  • Yarn Formation (TX-P002)
    • Spinning: Spinning
      • yarn size options from 45 to 370 DTEX; turns Cleaned Fiber into Spun Yarn; output goes to Weaving, Knitting
    • Default at this stage: Spinning
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" users check at this stage
  • Textile Formation (TX-P003)
    • Knitting: Knitting
      • yarn size options from 45 to 370 DTEX; turns Yarn into Greige Fabric
    • Weaving: Weaving
      • yarn size options from 45 to 370 DTEX; turns Yarn into Greige Fabric
    • Non-Woven: Needle Punching
      • turns Yarn into Greige Fabric
    • Default at this stage: Knitting
    • Supplier facility (FEM) data: users apply at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Needle Punching
    • Country of manufacture: changes the electricity part of Knitting, Weaving; other processes here keep their standard MSI value
    • "No process" users check at this stage
  • Preparation (TX-P004)
    • Preparation: Scouring
      • turns Greige Fabric into Prepared Fabric; users apply to the output of Knitting, Weaving
    • Default at this stage: Scouring
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: does not change the result at this stage
    • "No process" users check at this stage
  • Coloration (TX-P005)
    • Dyeing: Continuous Dyeing - Acid, Batch Dyeing - Acid
      • dye types: Acid; turns Prepared Fabric into Dyed Fabric
    • Default at this stage: Batch Dyeing - Acid
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" users check at this stage

Alpaca: lifecycle stages and processes (part 2 of 2: Finishing (TX-P006))


This part continues the list for Alpaca: lifecycle stages and processes.


  • Finishing (TX-P006)
    • Chemical Finishing: Foam or Spray-Dry, Weighting or Hand Building, Foam-Dry-Cure or Spray-Dry-Cure, Pad-Dry or Exhaust-Dry, Pad-Dry-Cure or Exhaust-Dry-Cure
      • turns Dyed Fabric into Finished Fabric
    • Mechanical Finishing: Heat Sealing, Sueding or Sanding, Calendering, Milling, Brushing or Buffing, Sanforizing, Embossing, Shearing, Compacting, Napping, Schreinering, Heat Setting, Pressing or Ironing
      • turns Dyed Fabric into Finished Fabric
    • Drying: Heat Drying
      • turns Dyed Fabric into Finished Fabric
    • Printing: Burnout Printing, Screen Printing, Digital Printing
      • turns Dyed Fabric into Finished Fabric
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of Foam or Spray-Dry, Heat Sealing, Sueding or Sanding, Burnout Printing, Calendering, Weighting or Hand Building, Milling, Screen Printing, Foam-Dry-Cure or Spray-Dry-Cure, Brushing or Buffing, Embossing, Shearing, Napping, Schreinering, Heat Setting, Pressing or Ironing; other processes here keep their standard MSI value
    • "No process" users check at this stage

Aramid (Textiles)


Metadata: material type Textiles (TX); material code TX0006; MSI 3.12; fiber origin synthetic


Aramid functions as a Textiles material in MatLib. It has 1 generic subtype (Aromatic PA) and 0 contributed trade names.


Supplier facility (FEM) data users link at: Yarn Formation (TX-P002), Textile Formation (TX-P003), Coloration (TX-P005), Finishing (TX-P006). Raw materials always use MSI data.


Also known as / search terms: aramid braid, aramid cloth, aramid composite, aramid cord, aramid felt, aramid fiber, aramid fibre, aramid honeycomb, aramid laminate, aramid paper, aramid prepreg, aramid pulp, aramid reinforced, aramid rope, aramid sleeve, aramid strap, aramid tape, aramid textile, aramid thread, aramid webbing, aramid yarn, aromatic polyamide, ballistic fabric, ballistic panel, body armor fabric, bulletproof fabric, bulletproof vest, cut-resistant fabric, cut-resistant glove, dupont kevlar, dupont nomex, fire-resistant garment, fireproof fabric, flame-resistant aramid, flight suit, fr aramid, fr fabric, heat-resistant fabric, heracron, heracron ht, high-performance fiber, high-performance fibre, high-strength fiber, high-tenacity aramid, hmf, kermel, kermel sas, kermel tech, kevlar, kevlar 149, kevlar 29, kevlar 49, kevlar km2, kevlar xp, kolon heracron, m-aramid, meta-aramid, meta-aramid fiber, nomex, nomex comfort, nomex delta, nomex iiia, p-aramid, para-aramid, para-aramid fiber, racing suit, stab-resistant, taparan, technora, technora t200, teijin technora, teijin twaron, teijinconex, teijinconex neo, turnout gear, twaron, twaron ct, twaron hm


Aramid: generic subtypes (industry average)



Aramid: lifecycle stages and processes (part 1 of 2: Raw Materials (TX-P001) to Coloration (TX-P005))


  • Raw Materials (TX-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Polymer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
  • Yarn Formation (TX-P002)
    • Spinning: Wet Spinning
      • turns Polymer into Filament Yarn
    • Default at this stage: Wet Spinning
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" users check at this stage
  • Textile Formation (TX-P003)
    • Weaving: Weaving
      • yarn size options from 45 to 370 DTEX; turns Yarn into Greige Fabric
    • Knitting: Knitting
      • yarn size options from 45 to 370 DTEX; turns Yarn into Greige Fabric
    • Non-Woven: Needle Punching
      • turns Yarn into Greige Fabric
    • Default at this stage: Knitting
    • Supplier facility (FEM) data: users apply at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Needle Punching
    • Country of manufacture: changes the electricity part of Weaving, Knitting; other processes here keep their standard MSI value
    • "No process" users check at this stage
  • Coloration (TX-P005)
    • Dyeing: Batch Dyeing - Disperse or Cationic, Continuous Dyeing - Disperse or Cationic, Solution Dope Dyeing
      • dye types: Disperse or Cationic; turns Prepared Fabric into Dyed Fabric
    • Default at this stage: Batch Dyeing - Disperse or Cationic
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" users check at this stage

Aramid: lifecycle stages and processes (part 2 of 2: Finishing (TX-P006))


This part continues the list for Aramid: lifecycle stages and processes.


  • Finishing (TX-P006)
    • Mechanical Finishing: Embossing, Pressing or Ironing, Sueding or Sanding, Sanforizing, Napping, Heat Sealing, Schreinering, Heat Setting, Compacting, Milling, Calendering, Shearing, Brushing or Buffing
      • turns Dyed Fabric into Finished Fabric
    • Chemical Finishing: Foam or Spray-Dry, Pad-Dry or Exhaust-Dry, Weighting or Hand Building, Pad-Dry-Cure or Exhaust-Dry-Cure, Foam-Dry-Cure or Spray-Dry-Cure
      • turns Dyed Fabric into Finished Fabric
    • Drying: Heat Drying
      • turns Dyed Fabric into Finished Fabric
    • Printing: Burnout Printing, Digital Printing, Screen Printing
      • turns Dyed Fabric into Finished Fabric
    • Supplier facility (FEM) data: users apply at this stage
    • Country of manufacture: changes the electricity part of Embossing, Pressing or Ironing, Sueding or Sanding, Foam or Spray-Dry, Burnout Printing, Screen Printing, Weighting or Hand Building, Napping, Heat Sealing, Schreinering, Heat Setting, Foam-Dry-Cure or Spray-Dry-Cure, Milling, Calendering, Shearing, Brushing or Buffing; other processes here keep their standard MSI value
    • "No process" users check at this stage
  • Stages where only "No process" applies: Preparation (TX-P004)