Materials Reference: Plastics
MatLib includes 18 Plastics materials (Acrylonitrile Butadiene Styrene (ABS), Epoxy, Nylon, Plastic Fillers, Poly(Methyl Methacrylate) (PMMA), Polycarbonate (PC)...) with generic subtypes, lifecycle stages, default and alternate processes, and contributed trade names, from MSI 3.12.
Also known as: Plastics, Plastics materials, MatLib, material subtypes, lifecycle stages, processes, trade names, Acrylonitrile Butadiene Styrene (ABS), Epoxy, Nylon, Plastic Fillers, Poly(Methyl Methacrylate) (PMMA), Polycarbonate (PC), Polyester, Polyethylene (PE), Polylactic Acid (PLA), Polyoxymethylene (POM), Polypropylene (PP), Polystyrene (PS), Polytetrafluoroethylene (PTFE), Polyvinyl Acetate (PVA), Polyvinyl Chloride (PVC), Silicone, Thermoplastic Polyurethane (TPU), Thermoset Polyurethane (PU).
Material Type: PlasticsMetadata: material type code PL; 18 materials; MSI 3.12
Plastics materials in MatLib move through these lifecycle stages, in order:
- Raw Materials (PL-P001): constituent stage
- Mixing or Preparation (PL-P002): constituent stage
- Molding or Curing (PL-P003): constituent stage, users can click more than one process
Materials in Plastics: Acrylonitrile Butadiene Styrene (ABS), Epoxy, Nylon, Plastic Fillers, Poly(Methyl Methacrylate) (PMMA), Polycarbonate (PC), Polyester, Polyethylene (PE), Polylactic Acid (PLA), Polyoxymethylene (POM), Polypropylene (PP), Polystyrene (PS), Polytetrafluoroethylene (PTFE), Polyvinyl Acetate (PVA), Polyvinyl Chloride (PVC), Silicone, Thermoplastic Polyurethane (TPU), Thermoset Polyurethane (PU).
Acrylonitrile Butadiene Styrene (ABS) (Plastics)Metadata: material type Plastics (PL); material code PL0011; MSI 3.12
Acrylonitrile Butadiene Styrene (ABS) represents a Plastics material in MatLib. It includes 1 generic subtype (ABS Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: a.b.s., abs, abs 3d printing, abs alloy, abs appliance, abs bar, abs bezel, abs blow molding, abs bumper, abs case, abs compound, abs console, abs copolymer, abs cover, abs dashboard, abs drain, abs enclosure, abs extrusion, abs fdm, abs fender, abs filament, abs film, abs fitting, abs granule, abs grille, abs helmet, abs housing, abs injection, abs keyboard, abs keycap, abs luggage, abs masterbatch, abs mirror housing, abs panel, abs pellet, abs pipe, abs plastic, abs plate, abs polymer, abs profile, abs resin, abs rod, abs sheet, abs sla, abs suitcase, abs thermoforming, abs toy, abs trim, abs tube, abs vent, abs-gf20, abs-gf30, abs-pc blend, abs/pa, abs/pbt, abs/pc, abs/pmma, acrylonitrile butadiene styrene, acrylonitrile styrene acrylate, acrylonitrile-butadiene-styrene, asa, carbon-filled abs, chi mei abs, chrome-plated abs, cycolac, electroplated abs, flame-retardant abs, formosa abs, gf abs, glass-filled abs, gloss abs, heat-resistant abs, high-impact abs, ineos abs, kralastic, kumho abs, lego abs, lg abs, lotte abs, lustran, magnum, matte abs, mineral-filled abs, novodur, painted abs, pcr abs, polylac, post-consumer abs, rabs, recycled abs, sabic abs, samsung abs, starex, terluran, textured abs, toray abs, toyolac, trinseo abs, uv-stabilized abs, versalis abs, weee abs
Acrylonitrile Butadiene Styrene (ABS): generic subtypes (industry average)- ABS Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Acrylonitrile Butadiene Styrene (ABS). (Process ID: PR0804000006)
- Description: Emulsion polymerisation, bulk polymerisation, or combined processes produce Acrylonitrile Butadiene Styrene (ABS). Acrylonitrile, butadiene, and styrene function as the essential raw materials for producing ABS.
- Characteristic: Synthetic
- Geography of data: Germany, US
- Data source: Data from Sphera: Acrylonitrile-Butadiene-Styrene Granulate (ABS) Mix https://lcadatabase.sphera.com/2024/xml-data/processes/fe808493-e2c2-4a68-b7fc-6510bf75b597.xml https://lcadatabase.sphera.com/2024/xml-data/processes/fe808493-e2c2-4a68-b7fc-6510bf75b597.xml Data from Sphera: Acrylonitrile-Butadiene-Styrene Granulate (ABS) https://lcadatabase.sphera.com/2024/xml-data/processes/fdecc165-93fd-4d86-a052-01e5df282059.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Injection Molding, Blow Molding, Hot Compression
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Injection Molding, Extrusion, Thermoforming, Hot Compression; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0013; MSI 3.12
Epoxy represents a Plastics material in MatLib. It includes 1 generic subtype (Expoxy Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: 2-part epoxy, 2k epoxy, 3m epoxy, araldite, araldite epoxy, aramid epoxy, bio-based epoxy, bisphenol a epoxy, bisphenol f epoxy, bpa epoxy, carbon fiber epoxy, cfrp epoxy, conductive epoxy, cycloaliphatic epoxy, cytec epoxy, dgeba, dgebf, epikote, epikure, epon, eponex, epotek, epoxy adhesive, epoxy casting, epoxy clear coat, epoxy coating, epoxy composite, epoxy encapsulant, epoxy filament winding, epoxy filler, epoxy floor, epoxy flooring, epoxy gel coat, epoxy gelcoat, epoxy grout, epoxy infusion, epoxy laminate, epoxy matrix, epoxy mold, epoxy mortar, epoxy paint, epoxy potting, epoxy prepreg, epoxy primer, epoxy pultrusion, epoxy putty, epoxy resin, epoxy system, epoxy tooling, epoxy wet layup, fiberglass epoxy, film adhesive epoxy, flexible epoxy, gfrp epoxy, glycidyl amine epoxy, gurit epoxy, henkel epoxy, hexcel epoxy, hexion epoxy, high-temp epoxy, huntsman epoxy, kevlar epoxy, loctite epoxy, marine epoxy, mas epoxy, multifunctional epoxy, novolac epoxy, optical epoxy, paste adhesive epoxy, plant-based epoxy, pro-set epoxy, recycled epoxy, rigid epoxy, sika epoxy, silver epoxy, snap-cure epoxy, structural epoxy, system three, thermally conductive epoxy, thermoset epoxy, thermosetting epoxy, toray epoxy, totalboat epoxy, toughened epoxy, two-part epoxy, uv-cure epoxy, west system
Epoxy: generic subtypes (industry average)- Expoxy Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Epoxy. (Process ID: PR0804000062)
- Description: The conversion of Bisphenol A with epichlorohydrin mainly conducts the production of Epoxy resin (EP).
- Characteristic: Synthetic
- Geography of data: Germany, Switzerland, Belgium
- Data source: Data from Sphera: Epoxy resin https://lcadatabase.sphera.com/2024/xml-data/processes/50125a08-978e-4156-bcc0-2d13ec3b49c7.xml https://lcadatabase.sphera.com/2024/xml-data/processes/49a3593a-a537-424b-afa8-438908becb47.xml https://lcadatabase.sphera.com/2024/xml-data/processes/d9a73be1-ad57-4ca3-a189-de4189cc7e87.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Injection Molding, Hot Compression Molding, Blow Molding
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Injection Molding, Hot Compression Molding, Extrusion, Thermoforming; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0003; MSI 3.12
Nylon represents a Plastics material in MatLib. It includes 4 generic subtypes (Nylon 6.6 Plastic, Nylon 6 Plastic, Nylon 12 Plastic, Recycled Nylon Plastic) and 9 contributed trade names from BASF, Fibrant, Envalior.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: 3d printed nylon, akulon, amorphous nylon, ascend nylon, basf nylon, black nylon, capron, carbon filled nylon, carbon-filled nylon, cast nylon, celanese nylon, cf nylon, dsm nylon, dupont nylon, durethan, ems-grivory, extruded nylon, fiber-reinforced nylon, flame-retardant nylon, fr nylon, gf nylon, glass filled nylon, glass-filled nylon, grilamid, grilamid tr, grivory, heat-stabilized nylon, hydrolysis-resistant nylon, impact-modified nylon, ixef, lanxess nylon, lubricated nylon, machined nylon, mineral filled nylon, mineral-filled nylon, minlon, mjf nylon, mos2 nylon, natural nylon, nylon 12 resin, nylon 6 resin, nylon 66 resin, nylon bolt, nylon bushing, nylon cable tie, nylon cap, nylon clamp, nylon clip, nylon composite, nylon compound, nylon connector, nylon fastener, nylon gear, nylon gf30, nylon gf50, nylon granule, nylon housing, nylon injection, nylon insert, nylon masterbatch, nylon molding compound, nylon moulding compound, nylon nut, nylon pellet, nylon plastic, nylon plug, nylon pulley, nylon resin, nylon rod, nylon screw, nylon sheet, nylon spacer, nylon tube, nylon washer, nylon zip tie, nylon-gf, orgalloy, pa 11, pa 12, pa 6, pa 66, pa plastic, pa resin, pa1010, pa11, pa12, pa46, pa6, pa6.6, pa610, pa612, pa66, polyamide plastic, ptfe-filled nylon, radilon, reinforced nylon, rilsan, semi-crystalline nylon, sintered nylon, sls nylon, solvay nylon, stanyl, technyl, toray nylon resin, toughened nylon, transparent nylon, trogamid, ultramid, unfilled nylon, uv-stabilized nylon, vestamid, vydyne, zytel
Nylon: generic subtypes (industry average)- Nylon 6.6 Plastic: Users click at Raw Materials (PL-P001) via Polymerization. (Process ID: PR0804000139)
- Description: Hexamethylene diamine and adipic acid via AH-salt produce Nylon 6.6 granulate. The first stage involves the preparation of pure AH salt (salt from adipic acid and hexamethylene diamine HMDA) in an aqueous solution. The 63% AH salt mixes with a small amount of hexamethylene diamine (HMDA) dissolved in acetic acid in a static mixer.
- Characteristic: Synthetic
- Geography of data: Germany
- Data source: Data from Sphera: Polyamide 6.6 Granulate (PA 6.6) Mix https://lcadatabase.sphera.com/2024/xml-data/processes/ece7efc0-b02a-4d80-9328-32a969bdab2c.xml
- Nylon 6 Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Nylon. (Process ID: PR0804000138)
- Description: Caprolactam, which chemists synthesize from benzene, ammonia, hydrogen, and sulphuric acid (oleum), produces Nylon 6. Via the intermediate products cyclohexane and cyclohexanone, chemists produce the monomer caprolactam. Nylon 6 forms through the reaction of caprolactam with water while producing the intermediate product aminocaproic acid. The acid forms through ring-opening of caprolactam when water is added. Workers heat caprolactam and water to 250 degrees Celsius. Nylon 6 then forms through the copolymerization of caprolactam and aminocaproic acid. The process occurs batchwise or continuously.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyamide 6 granulate (PA 6) https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml
- Nylon 12 Plastic: Users click at Raw Materials (PL-P001) via Polymerization. (Process ID: PR0804000141)
- Description: Polycondensation of omega-aminolauric acid produces Nylon 12, a polymer.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Proxy data from Sphera: Polyamide 6 granulate (PA 6) https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml
- Recycled Nylon Plastic: Users click at Raw Materials (PL-P001) via Mechanical Recycling; default representative for Nylon. (Process ID: PR0804000640)
- Description: Mechanically recycled nylon undergoes processing. The process includes transportation of waste materials to recycling plant, and also includes washing water, soaps, mechanical grinding, and extrusion into pellets for reuse.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Based on WALDB and GaBi background data.
- Ultramid® A ChemCycled Plastic [BASF], contributed by BASF: Users click at Raw Materials (PL-P001) as Chemical Recycling. (Process ID: PR0804000867)
- Description: Ultramid A Ccycled represents an innovative polyamide 66 polymer using chemically recycled raw materials from 100 percent post-consumer waste (for example, end-of-life tires) instead of fossil raw materials. Using a mass balance approach, Ultramid A Ccycled allows reduction of fossil resource consumption and product carbon footprint without compromising on quality and performance. BASF operates Ultramid® polymerization plants also in Ludwigshafen, Germany; Antwerp, Belgium; Freeport, USA; Caojing, China; and São Paulo, Brazil. Ultramid ® A forms through the condensation polymerization of hexamethylene diamine and adipic acid. Chemical recycling helps reduce the proportion of plastic waste which ends up in landfill or incineration. With chemical recycling, fossil resources for chemical production can get replaced with recycled material from plastic waste. Plastic waste transforms into secondary raw materials, such as pyrolysis oil or monomers, for example, by using thermochemical processes, hydrolysis, or solvolysis. The recycled raw materials get used in the production of new plastics. Based on the mass balance approach, the share of recycled material gets allocated to the product by a third-party audited methodology. ChemCyclingTM products look indistinguishable from products manufactured from fossil feedstocks. Both the mass balance procedure, by which the proportion of recycled raw material gets allocated to the product, and the products themselves gain certification from independent auditors. The Verbund system develops efficient value chains that extend from basic chemicals right through to high-value-added products such as coatings and crop protection agents. In addition, the by-products of one plant serve as the starting materials of another. In this system, chemical processes consume less energy, produce higher product yields, and conserve resources. In that manner, BASF saves on raw materials and energy, minimizes emissions, cuts logistics costs, and exploits synergies.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Germany, Belgium, US, China, Brazil
- Data source: Based on submitted data.
This part continues the list for Nylon: contributed trade names.
- Ultramid® B BMB Plastic [BASF], contributed by BASF: Users click at Raw Materials (PL-P001) as Polymerization. (Process ID: PR0804000636)
- Description: Ultramid B BMB represents an innovative polyamide 6 polymer using renewable raw materials (for example, food waste or manure) instead of fossil raw materials. Using a mass balance approach, Ultramid B BMB allows reduction of fossil resource consumption and product carbon footprint without compromising on quality and performance. BASF operates Ultramid® polymerization plants in Ludwigshafen, Germany; Antwerp, Belgium; Freeport, USA; Caojing, China; and São Paulo, Brazil. Ultramid ® B forms through the hydrolytic polymerization of caprolactam. BASF's biomass balance approach contributes to the use of renewable raw materials in BASF's integrated production system and can apply to the majority of BASF's product portfolio. BASF has broken new ground with the development of the biomass balance process for the use of renewable raw materials in the chemical industry. This approach allows fossil fuels to get replaced by renewable raw materials in BASF's Production Verbund. In the biomass balance approach, renewable resources such as bio-naphtha or biogas derived from organic waste or vegetable oils serve as feedstock in the very first steps of chemical production. The bio-based feedstock amount gets allocated to the Ultramid® products sold by means of a certified method. Ultramid® biomass Balance opens up new opportunities to create more sustainable solutions without the need to change production setup. The Verbund system develops efficient value chains that extend from basic chemicals right through to high-value-added products such as coatings and crop protection agents. In addition, the by-products of one plant serve as the starting materials of another. In this system, chemical processes consume less energy, produce higher product yields, and conserve resources. In that manner, BASF saves on raw materials and energy, minimizes emissions, cuts logistics costs, and exploits synergies. These solutions enable BASF to sustain competitiveness in every world region while making customers more successful.
- Characteristic: Bio-Based
- Geography of data: Germany, Belgium, US, China, Brazil
- Data source: Based on submitted data.
This part continues the list for Nylon: contributed trade names.
- Ultramid® A BMB Plastic [BASF], contributed by BASF: Users click at Raw Materials (PL-P001) as Polymerization. (Process ID: PR0804000866)
- Description: Ultramid A BMB represents an innovative polyamide 66 polymer using renewable raw materials (for example, food waste or manure) instead of fossil raw materials. Using a mass balance approach, Ultramid A BMB allows reduction of fossil resource consumption and product carbon footprint without compromising on quality and performance. BASF operates Ultramid® polymerization plants in Ludwigshafen, Germany; Antwerp, Belgium; Freeport, USA; Caojing, China; and São Paulo, Brazil. Ultramid ® A forms through the condensation polymerization of hexamethylene diamine and adipic acid. BASF's biomass balance approach contributes to the use of renewable raw materials in BASF's integrated production system and can apply to the majority of BASF's product portfolio. BASF has broken new ground with the development of the biomass balance process for the use of renewable raw materials in the chemical industry. This approach allows fossil fuels to get replaced by renewable raw materials in BASF's Production Verbund. In the biomass balance approach, renewable resources such as bio-naphtha or biogas derived from organic waste or vegetable oils serve as feedstock in the very first steps of chemical production. The bio-based feedstock amount gets allocated to the Ultramid® products sold by means of a certified method. Ultramid® biomass Balance opens up new opportunities to create more sustainable solutions without the need to change production setup. The Verbund system develops efficient value chains that extend from basic chemicals right through to high-value-added products such as coatings and crop protection agents. In addition, the by-products of one plant serve as the starting materials of another. In this system, chemical processes consume less energy, produce higher product yields, and conserve resources. In that manner, BASF saves on raw materials and energy, minimizes emissions, cuts logistics costs, and exploits synergies. These solutions enable BASF to sustain competitiveness in every world region while making customers more successful.
- Characteristic: Bio-Based
- Geography of data: Germany, Belgium, US, China, Brazil
- Data source: Based on submitted data.
This part continues the list for Nylon: contributed trade names.
- Ultramid® B ChemCycled Plastic [BASF], contributed by BASF: Users click at Raw Materials (PL-P001) as Chemical Recycling. (Process ID: PR0804000868)
- Description: Ultramid B Ccycled represents an innovative polyamide 6 polymer using chemically recycled raw materials from 100 percent post-consumer waste (for example, end-of-life tires) instead of fossil raw materials. Using a mass balance approach, Ultramid B Ccycled allows reduction of fossil resource consumption and product carbon footprint without compromising on quality and performance. BASF operates Ultramid® polymerization plants also in Ludwigshafen, Germany; Antwerp, Belgium; Freeport, USA; Caojing, China; and São Paulo, Brazil. Ultramid ® B forms through the hydrolytic polymerization of caprolactam. Chemical recycling helps reduce the proportion of plastic waste which ends up in landfill or incineration. With chemical recycling, fossil resources for chemical production can get replaced with recycled material from plastic waste. Plastic waste transforms into secondary raw materials, such as pyrolysis oil or monomers, for example, by using thermochemical processes, hydrolysis, or solvolysis. The recycled raw materials get used in the production of new plastics. Based on the mass balance approach, the share of recycled material gets allocated to the product by a third-party audited methodology. ChemCyclingTM products look indistinguishable from products manufactured from fossil feedstocks. Both the mass balance procedure, by which the proportion of recycled raw material gets allocated to the product, and the products themselves gain certification from independent auditors. The Verbund system develops efficient value chains that extend from basic chemicals right through to high-value-added products such as coatings and crop protection agents. In addition, the by-products of one plant serve as the starting materials of another. In this system, chemical processes consume less energy, produce higher product yields, and conserve resources. In that manner, BASF saves on raw materials and energy, minimizes emissions, cuts logistics costs, and exploits synergies. These solutions enable BASF to sustain competitiveness in every world region while making customers more successful.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Germany, Belgium, US, China, Brazil
- Data source: Based on submitted data.
This part continues the list for Nylon: contributed trade names.
- Ultramid® B Plastic [BASF], contributed by BASF: Users click at Raw Materials (PL-P001) as Polymerization. (Process ID: PR0804000635)
- Description: Ultramid B represents the right polyamide 6 polymer for high performance textiles. Thanks to BASF's integrated Verbund production system and continuous process optimization, it delivers significantly reduced environmental impacts such as material and energy savings. BASF operates Ultramid® polymerization plants in Ludwigshafen, Germany; Antwerp, Belgium; Freeport, USA; Caojing, China; and São Paulo, Brazil. Ultramid ® B forms through the hydrolytic polymerization of caprolactam. The Verbund system develops efficient value chains that extend from basic chemicals right through to high-value-added products such as coatings and crop protection agents. In addition, the by-products of one plant serve as the starting materials of another. In this system, chemical processes consume less energy, produce higher product yields, and conserve resources. In that manner, BASF saves on raw materials and energy, minimizes emissions, cuts logistics costs, and exploits synergies. These solutions enable BASF to sustain competitiveness in every world region while making customers more successful. For more information on Ultramid® Polyamide (PA) for textile applications: https://chemicals.basf.com/global/en/Monomers/polyamides-and-precursors For more information on BASF Verbund: https://www.basf.com/global/en/investors/calendar-and-publications/factbook/basf-group/verbund.html
- Characteristic: Synthetic
- Geography of data: Germany, Belgium, US, China, Brazil
- Data source: Based on submitted data.
- EcoLactam® IMPACT Plastic [Fibrant], contributed by Fibrant: Users click at Raw Materials (PL-P001) as Polymerization. (Process ID: PR0804000884)
- Description: Fibrant produces EcoLactam® IMPACT (caprolactam) in Geleen, the Netherlands, from the intermediate products cyclohexanone and hydroxylamine, both produced on site through hydrogenation of phenol and oxidation of ammonia, respectively. The company ships it to HSCC Group facilities in Southeastern China, where workers polymerize it into EcoLactam® IMPACT polyamide-6 chips. More information is available at: https://www.fibrant52.com/en/products/ecolactam
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data submitted by Fibrant.
This part continues the list for Nylon: contributed trade names.
- EcoPaxX Plastic [Envalior], contributed by Envalior: Users click at Raw Materials (PL-P001) as Polymerization. (Process ID: PR0804000276)
- Description: EcoPaxX PA410 represents a bio-based polyamide made through polymerisation of 2 monomers. The 2 monomers consist of C4 monomer, Di aminobutane (DAB), and C10 monomer, Sebacic acid derived from castor oil. Polymerisation functions as a process used to combine two carbon chains to make one long carbon chain. After workers produce PA410, they further process it, also called compounding, by adding multiple additives like glass fibre or flame retardants, and so on, to give desired property for the material.
- Characteristic: Synthetic
- Geography of data: Netherlands
- Data source: Data submitted by DSM Engineering Materials.
- Ultramid® A Plastic [BASF], contributed by BASF: Users click at Raw Materials (PL-P001) as Polymerization. (Process ID: PR0804000865)
- Description: Ultramid A represents the right polyamide 66 polymer for high performance textiles. Thanks to BASF's integrated Verbund production system and continuous process optimization, it delivers significantly reduced environmental impacts such as material and energy savings. BASF operates Ultramid® polymerization plants in Ludwigshafen, Germany; Antwerp, Belgium; Freeport, USA; Caojing, China; and São Paulo, Brazil. Ultramid ® A forms through the condensation polymerization of hexamethylene diamine and adipic acid. The Verbund system develops efficient value chains that extend from basic chemicals right through to high-value-added products such as coatings and crop protection agents. In addition, the by-products of one plant serve as the starting materials of another. In this system, chemical processes consume less energy, produce higher product yields, and conserve resources. In that manner, BASF saves on raw materials and energy, minimizes emissions, cuts logistics costs, and exploits synergies. These solutions enable BASF to sustain competitiveness in every world region while making customers more successful. For more information on Ultramid® Polyamide (PA) for textile applications: https://chemicals.basf.com/global/en/Monomers/polyamides-and-precursors For more information on BASF Verbund: https://www.basf.com/global/en/investors/calendar-and-publications/factbook/basf-group/verbund.html
- Characteristic: Synthetic
- Geography of data: Germany, Belgium, US, China, Brazil
- Data source: Based on submitted data.
This part continues the list for Nylon: contributed trade names.
- Loopamid® Plastic [BASF], contributed by BASF: Users click at Raw Materials (PL-P001) as Polymerization. (Process ID: PR0804000877)
- Description: With loopamid®, BASF has developed an innovative solution to improve circularity in the fashion industry and recycle polyamide 6 textile waste. Due to its capability to tolerate all fabric mixtures like PA6 and elastane, the technology behind loopamid allows textile-to-textile recycling of post-industrial and post-consumer textile waste. The fibers and materials get recycled over multiple cycles. At the same time, the material characteristics match those of conventional virgin polyamide. The BASF Verbund system develops efficient value chains that extend from basic chemicals right through to high-value-added products such as coatings and crop protection agents. In addition, the by-products of one plant serve as the starting materials of another. In this system, chemical processes consume less energy, produce higher product yields, and conserve resources. In that manner, BASF saves on raw materials and energy, minimizes emissions, cuts logistics costs, and exploits synergies. These solutions enable BASF to sustain competitiveness in every world region while making customers more successful. For more information on loopamid® for textile applications: www.loopamid.com For more information on BASF Verbund: https://www.basf.com/global/en/investors/calendar-and-publications/factbook/basf-group/verbund.html
- Characteristic: Synthetic
- Geography of data: China
- Data source: Based on submitted data.
- Raw Materials (PL-P001)
- Recycling: Mechanical Recycling; trade names: Ultramid® A ChemCycled Plastic [BASF], Ultramid® B ChemCycled Plastic [BASF]
- transforms Post-Consumer Waste into Resin or Pellet
- Polymerization: Polymerization; trade names: Ultramid® B BMB Plastic [BASF], Ultramid® A BMB Plastic [BASF], Ultramid® B Plastic [BASF], EcoLactam® IMPACT Plastic [Fibrant], EcoPaxX Plastic [Envalior], Ultramid® A Plastic [BASF], Loopamid® Plastic [BASF]
- transforms Fossil Fuel/Bio-Based into Resin or Pellet
- Default at this stage: Polymerization, Mechanical Recycling
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Blow Molding, Hot Compression, Injection Molding
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Extrusion, Hot Compression, Injection Molding, Thermoforming; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0020; MSI 3.12
Plastic Fillers represents a Plastics material in MatLib. It includes 2 generic subtypes (Carbon Plastic Fillers, Glass Plastic Fillers) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: alumina trihydrate, antimony trioxide filler, ath filler, barium sulfate filler, barytes, baso4, birla carbon, cabot, caco3, caco3 filler, calcium carbonate filler, calcium carbonate masterbatch, carbon black filler, carbon fiber filler, carbon nanotube filler, cellulose filler, clay filler, cnt filler, coconut shell filler, conductive filler, filler compound, filler concentrate, filler masterbatch, filler material, flame retardant filler, fr filler, gcc filler, glass bead filler, glass bubble, glass fiber filler, glass fiber reinforcement, glass fibre filler, glass sphere filler, ground calcium carbonate, hollow glass microsphere, huber engineered materials, imerys, kaolin, kaolin filler, magnesium hydroxide, magnetic filler, mdh filler, mica, mica filler, mineral filler, minerals technologies, mondo minerals, natural fiber filler, nouryon filler, omya, owens corning filler, pcc filler, plastic filler, precipitated calcium carbonate, rice husk filler, silica filler, specialty minerals, starch filler, talc, talc filler, talc masterbatch, talcum, wollastonite, wollastonite filler, wood fiber filler, wood flour filler, zinc borate filler
Plastic Fillers: generic subtypes (industry average)- Carbon Plastic Fillers: Users click at Raw Materials (PL-P001) via Processing. (Process ID: PR0804000810)
- Description: This dataset represents the dominant production technology for general-purpose carbon black, the furnace process. General purpose carbon black works in tire production, and large-area or industrial coatings and paints. The unit process inputs derive from: process description from literature, chemical and physical characteristics of the process inputs and production route, mass balance, energy balance, and comparison with related datasets. The unit process emissions derive from: US EPA reports and US Federal Regulation related to carbon black production which have been in effect since 2006. Ink-quality or precision carbon black does not get represented by this dataset. High purity, precision-specified carbon black, the type used in inks and high-precision paints, lacquers, or other coatings, production uses other production technologies. For the foreground system, price allocation applies.
- Characteristic: Synthetic
- Geography of data: US
- Data source: Data from Sphera: Carbon black (furnace black; general purpose) (economic allocation) https://lcadatabase.sphera.com/2024/xml-data/processes/33ef59e0-7524-4435-96cb-ad2c9cc5e8cf.xml
- Glass Plastic Fillers: Users click at Raw Materials (PL-P001) via Processing; default representative for Plastic Fillers. (Process ID: PR0804000078)
- Description: The most widely used composition to produce continuous filament glass fibre, E-glass, represents more than 98 percent of the sector output. No cullet input gets considered. The largest inputs to the process include the silica sand, the alkali/alkali earth metal carbonates and oxides, alumina, and the boron-containing materials.
- Characteristic: Synthetic
- Geography of data: Germany
- Data source: Data from Sphera: Glass fibres https://lcadatabase.sphera.com/2024/xml-data/processes/ee377281-8d03-4dbe-90bf-fa51f61556a2.xml
- Raw Materials (PL-P001)
- Processing: Processing
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Processing
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Molding: Blow Molding, Hot Compression, Injection Molding
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Extrusion, Thermoforming, Hot Compression, Injection Molding; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0008; MSI 3.12
Poly(Methyl Methacrylate) (PMMA) represents a Plastics material in MatLib. It includes 1 generic subtype (PMMA Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: acrylic adhesive, acrylic aquarium, acrylic barrier, acrylic bending, acrylic bonding, acrylic cement, acrylic display, acrylic fabrication, acrylic glass, acrylic injection, acrylic lighting, acrylic molding, acrylic panel, acrylic plastic, acrylic resin, acrylic rod, acrylic sheet, acrylic signage, acrylic sneeze guard, acrylic thermoforming, acrylic tube, acrylite, altuglas, asahi kasei pmma, cast acrylic, cell-cast acrylic, cell-cast pmma, chi mei pmma, clear acrylic, colored acrylic, continuous-cast pmma, deglas, diakon, evonik, extruded acrylic, extruded pmma, fluorescent acrylic, frosted acrylic, impact-modified acrylic, injection-molded pmma, kuraray pmma, lg pmma, lucite, mirrored acrylic, mitsubishi pmma, optix, oroglas, p.m.m.a., paraglas, perspex, plexiglas, plexiglass, pmma, pmma bar, pmma billet, pmma block, pmma diffuser, pmma film, pmma granule, pmma lens, pmma light guide, pmma mirror, pmma pellet, pmma resin, poly methyl methacrylate, poly(methyl methacrylate), polymethyl methacrylate, reclaimed acrylic, recycled pmma, rohm, rpmma, shinkolite, sumitomo pmma, uv-resistant acrylic, uv-stable acrylic
Poly(Methyl Methacrylate) (PMMA): generic subtypes (industry average)- PMMA Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Poly(Methyl Methacrylate) (PMMA). (Process ID: PR0804000148)
- Description: Methacrylic acid and methyl methacrylate function as the essential raw materials for producing PMMA. Polymethyl methacrylate granulate forms from ester of methyacrylic acid through bulk polymerisation. Methyl methacrylate derives from the raw material acetone cyanohydrin which workers make from acetone, hydrogen cyanide, methyl alcohol, and sulphuric acid.
- Characteristic: Synthetic
- Geography of data: Germany
- Data source: Data from Sphera: Polymethylmethacrylate granulate (PMMA) mix https://lcadatabase.sphera.com/2024/xml-data/processes/c54b7fb1-a7ad-4752-a0c9-da98dfbcbd0d.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Blow Molding, Hot Compression, Injection Molding
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Hot Compression, Injection Molding, Thermoforming, Extrusion; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0005; MSI 3.12
Polycarbonate (PC) represents a Plastics material in MatLib. It includes 2 generic subtypes (PC Plastic, Recycled PC Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: ballistic polycarbonate, bulletproof polycarbonate, calibre, chi mei pc, clear polycarbonate, corrugated polycarbonate, covestro pc, flame-retardant pc, fr pc, gf pc, glass-filled pc, idemitsu pc, iupilon, lexan, lg pc, makrolon, mitsubishi pc, multiwall polycarbonate, novarex, optical polycarbonate, panlite, pc, pc bar, pc granule, pc lens, pc pellet, pc plastic, pc profile, pc resin, pc rod, pc sheet, pc tube, pc-abs, pc/abs, polycarbonate, polycarbonate bar, polycarbonate blow molding, polycarbonate bottle, polycarbonate container, polycarbonate cover, polycarbonate diffuser, polycarbonate extrusion, polycarbonate film, polycarbonate glazing, polycarbonate goggle, polycarbonate greenhouse, polycarbonate helmet, polycarbonate housing, polycarbonate injection, polycarbonate lens, polycarbonate light, polycarbonate molding, polycarbonate panel, polycarbonate pellet, polycarbonate resin, polycarbonate rod, polycarbonate roofing, polycarbonate safety glasses, polycarbonate sheet, polycarbonate skylight, polycarbonate thermoforming, polycarbonate tube, polycarbonate visor, polycarbonate window, post-consumer pc, recycled pc, rpc, sabic pc, solid polycarbonate, tarflon, teijin pc, triple-wall polycarbonate, trirex, twin-wall polycarbonate, uv-stabilized pc, xantar
Polycarbonate (PC): generic subtypes (industry average)- PC Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polycarbonate (PC). (Process ID: PR0804000151)
- Description: A data collection from European producers of polycarbonate (PC) provides the main data source. Primary data on gate-to-gate PC production derives from site specific information for processes under operational control supplied by the participating companies of this study. Three different PC producers with plants in four European countries participated in the primary data collection.
- Characteristic: Synthetic
- Geography of data: Germany, US
- Data source: Data from Sphera: Polycarbonate Granulate (PC) https://lcadatabase.sphera.com/2024/xml-data/processes/e8bc146d-4278-4b64-a6e5-ed9847528338.xml Data from Sphera: Polycarbonate Granulate (PC) https://lcadatabase.sphera.com/2024/xml-data/processes/f45e7609-e393-4f17-b3db-3255412a857f.xml
- Recycled PC Plastic: Users click at Raw Materials (PL-P001) via Recycling; default representative for Polycarbonate (PC). (Process ID: PR0804000523)
- Description: This process covers the production of mechanically recycled Polycarbonate. The inventory includes the input of sodium hydroxide, inorganic chemicals, heat, and electricity and covers the wasteflow of the processing waste to incineration and landfill according to the European share.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Based on WALDB and GaBi background data.
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Recycling: Recycling
- transforms Post-Consumer Waste into Resin or Pellet
- Default at this stage: Polymerization, Recycling
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Molding: Injection Molding, Hot Compression, Blow Molding
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Thermoforming, Extrusion, Injection Molding, Hot Compression; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0014; MSI 3.12
Polyester represents a Plastics material in MatLib. It includes 6 generic subtypes (Mechanical rPET Plastic, Semi-Mechanical rPET Plastic, Chemical (BHET) rPET Plastic, PBT Plastic, Polyester Plastic, Chemical (Methanolysis) rPET Plastic) and 2 contributed trade names from Nan Ya Plastics.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: amorphous pet, apet, biaxially oriented pet, bopet, clear pet, co-polyester, copolyester, cpet, crastin, crystallized pet, eastar, eastman petg, eastman tritan, fda pet, food-grade pet, glycol modified pet, glycol-modified pet, hostaphan, lumirror, melinex, mylar, opet, oriented pet, pbt plastic, pcr pet, pct, pen, pet blister, pet blow molding, pet bottle, pet bottle grade, pet clamshell, pet container, pet extrusion, pet fiber grade, pet film, pet film grade, pet granule, pet injection, pet packaging, pet plastic, pet preform, pet resin, pet resin pellet, pet sheet, pet stretch blow, pet thermoform, pet thermoforming, pet tray, pet-g, petg, petg container, petg medical, petg sheet, pocan, polybutylene terephthalate plastic, polyethylene naphthalate, polyethylene terephthalate, polyethylene terephthalate plastic, post-consumer pet, recycled pet plastic, rpet plastic, spectar, tritan, valox
Polyester: generic subtypes (industry average) (part 1 of 2: Mechanical rPET Plastic to PBT Plastic)- Mechanical rPET Plastic: Users click at Raw Materials (PL-P001) via Mechanical Recycling; default representative for Polyester. (Process ID: PR0804000289)
- Description: This process represents resin-specific environmental burdens associated with the production of secondary plastic pellets from post-consumer plastic scrap and used plastic products or packaging. The process includes a conservative estimate of 100 miles of transport of the waste plastic from location of discard (curbside), through locations of collection, and to the recycling center. Within the recycling facility, washing, separation, granulation, and pelletizing occur. This model applies mass allocation for the separation and cleaning of the mixed waste plastic, such that all plastics (PET, polypropylene, polystyrene), despite differing ease of separation, share the burdens of separation equally. The energy required for pelletization and compounding of the final plastic derives from the specific polymer type, dependent on the material properties (specific heat and enthalpy of fusion) of the resin.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Data from Sphera: Recycling of polyethylene terephthalate (PET) [Cascale] GUID: (50FF7133-4559-4414-818F-254367CB932B)
- Semi-Mechanical rPET Plastic: Users click at Raw Materials (PL-P001) via Semi-Mechanical Recycling. (Process ID: PR0804000566)
- Description: Mechanically ground, post-consumer recycled PET flakes that workers extrude, purify, and pelletize, and then treat with ethylene glycol for the final purification stage.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Based on literature data.
- Chemical (BHET) rPET Plastic: Users click at Raw Materials (PL-P001) via Chemical (BHET). (Process ID: PR0804000567)
- Description: Back-to-oligomer recycling that yields BHET. The process involves glycolysis, filtration, and then repolymerization. It yields high quality rPET.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Depolymerisation technology breaks down PET polymer into monomers or oligomers via various methods. Recycled PET results from production via the glycolysis route.
- PBT Plastic: Users click at Raw Materials (PL-P001) via Polymerization. (Process ID: PR0804000647)
- Description: Transesterification of a mix of dimethyl terephtalate with 1.4 butanediol and catalysts produces Polybutylene terephthalate (PBT).
- Characteristic: Synthetic
- Geography of data: Germany
- Data source: Data from Sphera: Polybutylene Terephthalate Granulate (PBT) Mix https://lcadatabase.sphera.com/2024/xml-data/processes/38a02bb2-6d17-4d3a-84e7-cd4bebfa7233.xml
This part continues the list for Polyester: generic subtypes (industry average).
- Polyester Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polyester. (Process ID: PR0804000156)
- Description: Polyethylene terephthalate (abbreviated as PET or PETE, CAS number 25038-59-9) represents a very common linear polymer best known for its use in manufacturing plastic bottles. Two major production paths produce polyethylene terephthalate. The older process involves transesterification of dimethyl terephthalate as a precursor, and a more recently developed process relies on the direct esterification of terephthalic acid with ethylene glycol, modeled here. The terephthalic acid route offers preference for its higher reaction rate, production of high molecular weight polymer chains, and lower use of ancillary inputs. In this reaction, ethylene glycol and terephthalic acid combine in the liquid phase with a catalyst, resulting in the esterification of the terephthalic acid. After the separation of unreacted ethylene glycol, the reaction product undergoes vigorous mixing with a catalyst to instigate the polycondensation reaction, resulting in the final polymer product.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml Ethylene glycol (MEG) via coal to ethylene glycol process https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml Ethylene glycol (from ethene and oxygen via EO) https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml
- Chemical (Methanolysis) rPET Plastic: Users click at Raw Materials (PL-P001) via Chemical (Methanolysis). (Process ID: PR0804000570)
- Description: This process covers the output of chemically recycled PET with the methanolysis approach. It includes depolymerization and repolymerization.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: World Apparel and Footwear Life Cycle Database.
- Chemically Recycled Polyester Plastic [Nan Ya Plastics], contributed by Nan Ya Plastics: Users click at Raw Materials (PL-P001) as Chemical Recycling. (Process ID: PR0804000716)
- Description: This process consists of chemical methods such as glycolysis, esterification, polymerization, and pelletizing. First, recycled flakes from post-consumer PET bottles undergo alcoholysis to oligomer through reaction with ethylene glycol. Through esterification and polymerization reaction, workers produce molten polymer. Finally, the polymer goes through water cooling and pelletizing to produce recycled PET pellets. https://sayarenew.com/
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Taiwan
- Data source: Based on submitted data.
- Mechanically Recycled Polyester Plastic [Nan Ya Plastics], contributed by Nan Ya Plastics: Users click at Raw Materials (PL-P001) as Mechanical Recycling. (Process ID: PR0804000715)
- Description: This process consists of mechanical methods such as drying, melt extrusion, and pelletizing. First, recycled flakes from post-consumer PET bottles undergo miniaturization and reduced water content in a dryer. After the drying process, workers make polymer strips by melting the flakes with an extruder. Finally, the polymer goes through water cooling and pelletizing to produce recycled PET pellets. https://sayarenew.com/
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Taiwan
- Data source: Based on submitted data.
- Raw Materials (PL-P001)
- Recycling: Mechanical Recycling, Semi-Mechanical Recycling, Chemical (BHET), Chemical (Methanolysis); trade names: Chemically Recycled Polyester Plastic [Nan Ya Plastics], Mechanically Recycled Polyester Plastic [Nan Ya Plastics]
- transforms Post-Consumer Waste into Resin or Pellet
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Mechanical Recycling, Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Injection Molding, Hot Compression, Blow Molding
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Injection Molding, Hot Compression, Thermoforming, Extrusion; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0004; MSI 3.12
Polyethylene (PE) represents a Plastics material in MatLib. It includes 3 generic subtypes (Polyethylene (LDPE) Plastic, Polyethylene (HDPE) Plastic, Recycled PE Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: alathon, bio-pe, biobased pe, borealis pe, braskem green pe, chevron phillips pe, chlorinated polyethylene, cpe, cross-linked polyethylene, dow pe, dowlex, dyneema pe, elite pe, enable pe, exceed pe, exxonmobil pe, green pe, grs pe, h.d.p.e., hdpe, hdpe bottle, hdpe container, hdpe drum, hdpe pipe, hdpe sheet, high density polyethylene, high-density polyethylene, ineos pe, l.d.p.e., ldpe, ldpe bag, ldpe film, ldpe liner, linear low density polyethylene, linear low-density polyethylene, lldpe, low density polyethylene, low-density polyethylene, lyondellbasell pe, marlex, mdpe, medium-density polyethylene, oxidized pe wax, pcr pe, pe, pe bag, pe blow molding, pe board, pe bottle, pe cling film, pe coating, pe compound, pe container, pe drum, pe extrusion, pe film, pe geomembrane, pe granule, pe injection, pe laminate, pe liner, pe masterbatch, pe molding, pe moulding, pe packaging, pe pellet, pe pipe, pe plastic, pe resin, pe rod, pe sheet, pe shrink film, pe stretch film, pe tank, pe tube, pe tubing, pe wax, pe wrap, pex, pir pe, poly bag, polyethylene, polyethylene bag, polyethylene film, polyethylene plastic, post-consumer pe, post-industrial pe, recycled hdpe, recycled ldpe, recycled pe, rhdpe, rldpe, rpe, sabic pe, tyvek, uhmwpe, ultra-high molecular weight polyethylene, xlpe
Polyethylene (PE): generic subtypes (industry average)- Polyethylene (LDPE) Plastic: Users click at Raw Materials (PL-P001) via Polymerization. (Process ID: PR0804000102)
- Description: Crude oil forms the basis for the production of polyethylene. A few process types exist for polymerising ethylene to polyethylene. Workers polymerize polyethylene from ethylene, which they extract through cracking naphtha or gas oil in a steam-cracker. In principle, low density polyethylene (PE-LD) traditionally undergoes production through a high-pressure process.
- Characteristic: Synthetic
- Geography of data: Germany, US
- Data source: Data from Sphera: Polyethylene Low Density Granulate (LDPE/PE-LD) https://lcadatabase.sphera.com/2024/xml-data/processes/6de31fe6-71e3-41f9-a166-4afc89961653.xml Data from Sphera: Polyethylene Low Density Granulate (LDPE/PE-LD) https://lcadatabase.sphera.com/2024/xml-data/processes/1cab96fb-492d-436a-8f14-fd86df4f7843.xml
- Polyethylene (HDPE) Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polyethylene (PE). (Process ID: PR0804000085)
- Description: Crude oil forms the basis for the production of polyethylene. Workers polymerize polyethylene from ethylene, which they extract through cracking naphtha or gas oil in a steam-cracker. High-density polyethylene PE-HD undergoes production in a low-pressure process which workers classify, according to the phase in which the reaction occurs, into solution process, suspension process, and gas phase process. Because of its high market share, the gas phase process in a fluidised bed reactor gets chosen as reference process for the production of polyethylene.
- Characteristic: Synthetic
- Geography of data: Germany, US
- Data source: Data from Sphera: Polyethylene High Density Granulate (HDPE/PE-HD) Mix https://lcadatabase.sphera.com/2024/xml-data/processes/7367acab-4ce1-4ecb-aebf-29a2ea20bd1d.xml Data from Sphera: Polyethylene High Density Granulate (HDPE/PE-HD) https://lcadatabase.sphera.com/2024/xml-data/processes/829d9fc2-d5ea-4460-afab-9d110593d3cd.xml
- Recycled PE Plastic: Users click at Raw Materials (PL-P001) via Recycling; default representative for Polyethylene (PE). (Process ID: PR0804000649)
- Description: This single output process covers the output of 1 kg of mechanically recycled Polyethylene. Users can employ this process for recycled LDPE or HDPE.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Based on WALDB and GaBi background data.
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Recycling: Recycling
- transforms Post-Consumer Waste into Resin or Pellet
- Default at this stage: Polymerization, Recycling
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Hot Compression, Injection Molding, Blow Molding
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Hot Compression, Injection Molding, Thermoforming, Extrusion; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0007; MSI 3.12
Polylactic Acid (PLA) represents a Plastics material in MatLib. It includes 1 generic subtype (PLA Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: amorphous pla, astm d6400, basf ecovio, bio-based pla, bio-degradable pla, bio-plastic pla, biodegradable pla, bioplastic pla, bpi certified, carbon-neutral pla, chemically recycled pla, compostable pla, compostable plastic, corn plastic, corn starch plastic, corn-based plastic, crystalline pla, en 13432, futerro pla, heat-resistant pla, high-heat pla, hisun pla, home compostable, industrial compostable, ingeo 2003d, ingeo 3001d, ingeo 3251d, ingeo 4032d, ingeo 6060d, ingeo 6100d, ingeo 6400d, ingeo pla, luminy pla, natureworks ingeo, novamont mater-bi pla, ok compost, p.l.a., pdla, pla, pla 3d printing, pla blister, pla blow molding, pla bottle, pla clamshell, pla compound, pla container, pla cup, pla cutlery, pla extrusion, pla fabric, pla fdm, pla fiber, pla fibre, pla filament, pla film, pla film packaging, pla fork, pla injection molding, pla knife, pla lid, pla masterbatch, pla nonwoven, pla pellet, pla plastic, pla polymer, pla resin, pla sheet, pla spoon, pla straw, pla thermoforming, pla tray, plla, poly lactic acid, poly-d-lactic acid, poly-l-lactic acid, poly-lactic acid, polylactic acid, polylactic acid plastic, recycled pla, renewable pla, seedling logo, stereocomplex pla, sulzer pla, tongjieliang pla, totalenergies corbion, tuv compostable
Polylactic Acid (PLA): generic subtypes (industry average)- PLA Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polylactic Acid (PLA). (Process ID: PR0804000161)
- Description: Polylactic Acid (PLA) represents a biodegradable thermoplast (in the polyester family) that derives from natural sources, such as corn starch or sugar cane. Workers produce it using open ring polymerization. In relation to starch blends, the proportion of starch ranges from 30 to 70 percent. To give an example, workers modelled a proportion of 50 percent.
- Characteristic: Bio-Based
- Geography of data: Europe
- Data source: Data from Sphera: Starch/polylactic acid (PLA) blend https://lcadatabase.sphera.com/2024/xml-data/processes/e872387e-c0d7-48c3-94cc-cbd3429af732.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Bio-Based into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Hot Compression, Blow Molding, Injection Molding
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Hot Compression, Injection Molding, Extrusion, Thermoforming; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0018; MSI 3.12
Polyoxymethylene (POM) represents a Plastics material in MatLib. It includes 1 generic subtype (POM Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: acetal, acetal copolymer, acetal homopolymer, acetal plastic, acetal resin, asahi kasei pom, basf pom, celanese pom, celcon, celcon m25, celcon m90, conductive pom, delrin, delrin 100, delrin 150, delrin 500, delrin 900, dupont pom, duracon, duracon m90, engineering plastic pom, food-grade pom, gf pom, glass-filled pom, hostaform, hostaform c, hostaform s, kep pom, kepital, korea engineering plastics, low-friction pom, medical-grade pom, mineral-filled pom, mitsubishi pom, p.o.m., polyformaldehyde, polyoxymethylene, polyplastics pom, pom, pom bar, pom bearing, pom buckle, pom bushing, pom button, pom cam, pom clasp, pom clip, pom connector, pom extrusion, pom eyelet, pom fastener, pom fitting, pom gear, pom granule, pom guide, pom handle, pom housing, pom injection, pom knob, pom machining, pom plastic, pom plate, pom pump, pom resin, pom resin pellet, pom rod, pom roller, pom sheet, pom slider, pom slider zipper, pom snap, pom spring, pom tube, pom valve, pom wheel, pom zipper, pom-c, pom-h, ptfe-filled pom, recycled pom, rpom, tenac, tenac c, toughened pom, ultraform, ultraform n, ultraform w, uv-stabilized pom
Polyoxymethylene (POM): generic subtypes (industry average)- POM Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polyoxymethylene (POM). (Process ID: PR0804000590)
- Description: Polyoxymethylene (POM) represents a polymer of formaldehyde, which workers produce from methanol. Workers produce POM through polymerisation.
- Characteristic: Synthetic
- Geography of data: Germany, Netherlands, France, US
- Data source: Data from Sphera: Polyoxymethylene granulate (POM) https://lcadatabase.sphera.com/2024/xml-data/processes/365e6957-e786-40b2-b9e9-c00bf944d1f6.xml https://lcadatabase.sphera.com/2024/xml-data/processes/9f4b004b-738a-4876-a9c4-aa0a37f93ed0.xml https://lcadatabase.sphera.com/2024/xml-data/processes/4ebea791-ff00-4b32-9493-d4ea9f3f3084.xml https://lcadatabase.sphera.com/2024/xml-data/processes/06aa37cf-881c-4abd-8594-c2ea213728a5.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Injection Molding, Blow Molding, Hot Compression Molding
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Injection Molding, Hot Compression Molding, Thermoforming, Extrusion; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0006; MSI 3.12
Polypropylene (PP) represents a Plastics material in MatLib. It includes 2 generic subtypes (Recycled PP Plastic, PP Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: adstif, atactic pp, bio-based pp, bio-pp, borealis pp, borflow, braskem pp, carbon-filled pp, clarified pp, coroplast, correx, exxonmobil pp, formosa pp, gf pp, glass-filled pp, high-crystallinity pp, hmc pp, impact pp, ineos pp, inspire, isotactic pp, lg pp, living hinge pp, lyondellbasell pp, metallocene pp, mineral-filled pp, moplen, nucleated pp, p.p., pcr pp, petrochina pp, pir pp, polypropylene, polypropylene plastic, post-consumer pp, pp, pp appliance, pp automotive, pp bar, pp battery case, pp bin, pp block copolymer, pp blow molding, pp board, pp bottle, pp bumper, pp cap, pp closure, pp compound, pp container, pp copol, pp copolymer, pp corrugated, pp crate, pp cup, pp dashboard, pp door panel, pp drum, pp extrusion, pp fan shroud, pp fiber, pp fibre, pp film, pp flute board, pp granule, pp hinge, pp homo, pp homopolymer, pp impact copolymer, pp injection, pp lid, pp masterbatch, pp molding, pp moulding, pp packaging, pp pail, pp pallet, pp pellet, pp pipe, pp plastic, pp profile, pp random copolymer, pp resin, pp rod, pp sheet, pp thermoforming, pp tote, pp tub, pp tube, pp wax, pro-fax, profax, recycled pp, rpp, rubber-modified pp, sabic pp, samsung pp, sinopec pp, syndiotactic pp, talc-filled pp, total pp, ziegler-natta pp
Polypropylene (PP): generic subtypes (industry average)- Recycled PP Plastic: Users click at Raw Materials (PL-P001) via Recycling; default representative for Polypropylene (PP). (Process ID: PR0804000524)
- Description: This process covers the production of mechanically recycled polypropylene. The inventory includes the input of sodium hydroxide, inorganic chemicals, water, heat, and electricity and covers the wasteflow of the processing waste to incineration and landfill according to the European share.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Based on WALDB and GaBi background data.
- PP Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polypropylene (PP). (Process ID: PR0804000162)
- Description: Crude oil forms the basis for the production of polypropylene. Workers polymerize polypropylene from propene (propylene), which they extract through cracking naphtha or gas oil in a steam-cracker. Workers produce PP in a low-pressure process.
- Characteristic: Synthetic
- Geography of data: Germany, US
- Data source: Data from Sphera: Polypropylene granulate (PP) mix https://lcadatabase.sphera.com/2024/xml-data/processes/313b4865-e554-4f3a-bbaf-ecab7c15c061.xml Data from Sphera: Polypropylene granulate (PP) https://lcadatabase.sphera.com/2024/xml-data/processes/5bb0726a-a44f-4f80-a964-0aeeb947ad41.xml
- Raw Materials (PL-P001)
- Recycling: Recycling
- transforms Post-Consumer Waste into Resin or Pellet
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Recycling, Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Hot Compression, Blow Molding, Injection Molding
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Hot Compression, Extrusion, Thermoforming, Injection Molding; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0010; MSI 3.12
Polystyrene (PS) represents a Plastics material in MatLib. It includes 1 generic subtype (PS Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: americas styrenics, biaxially oriented ps, bops, chemically recycled ps, chimei ps, crystal polystyrene, depolymerized ps, edistir, empera, general purpose polystyrene, general-purpose polystyrene, gpps, high impact polystyrene, high-impact polystyrene, hips, ineos ps, k-resin, lacqrene, lg ps, lustran, ops, oriented ps, pcr ps, polystyrene, polystyrene plastic, polystyrene sheet, post-consumer ps, ps, ps appliance, ps bar, ps blow molding, ps cassette, ps clamshell, ps compound, ps container, ps cup, ps cutlery, ps disposable, ps egg carton, ps extrusion, ps film, ps food container, ps granule, ps hanger, ps hinged container, ps housing, ps injection, ps jewel case, ps labware, ps lid, ps meat tray, ps packaging, ps pellet, ps petri dish, ps plastic, ps profile, ps resin, ps rod, ps sheet, ps thermoforming, ps toy, ps tray, ps tube, ps vending cup, ps yogurt cup, recycled ps, rps, sps, styrene monomer recycled, styrolux, styron, syndiotactic ps, total ps, toyo ps, trinseo ps, versalis ps
Polystyrene (PS): generic subtypes (industry average)- PS Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polystyrene (PS). (Process ID: PR0804000163)
- Description: Polymerisation of styrene monomer produces polystyrene, a chain-growth reaction which heat, free radical organic initiator, anionic or cationic initiating systems, or coordination-insertion organometallic initiating complexes can induce. A data collection from European producers of HIPS provides the main data source.
- Characteristic: Synthetic
- Geography of data: Germany
- Data source: Data from Sphera: Polystyrene granulate (PS) mix https://lcadatabase.sphera.com/2024/xml-data/processes/120bbd76-9b55-44f1-ae58-1c7c6efa9998.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Molding: Hot Compression, Injection Molding, Blow Molding
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Extrusion, Hot Compression, Injection Molding, Thermoforming; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0015; MSI 3.12
Polytetrafluoroethylene (PTFE) represents a Plastics material in MatLib. It includes 1 generic subtype (PTFE Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: 3m dyneon, agc ptfe, bronze-filled ptfe, carbon-filled ptfe, chemours teflon, daikin ptfe, dry film lubricant, eptfe, eptfe gasket, eptfe sealant, etfe, expanded ptfe, fep, fluoro-polymer, fluoropolymer, glass-filled ptfe, gore ptfe, graphite-filled ptfe, gujarat fluorochemicals, modified ptfe, non-stick coating, non-stick cookware, non-stick pan, nonstick coating, p.t.f.e., pfa, plumber's tape, poly-tetrafluoroethylene, polytetrafluoroethylene, ptfe, ptfe architectural membrane, ptfe backup ring, ptfe bearing, ptfe bellows, ptfe bushing, ptfe coated, ptfe coating, ptfe cookware, ptfe diaphragm, ptfe dispersion, ptfe emulsion, ptfe extruded, ptfe fabric, ptfe filled, ptfe film, ptfe fitting, ptfe flange, ptfe gasket, ptfe granule, ptfe hose, ptfe impregnated, ptfe lined, ptfe liner, ptfe lubricant, ptfe machined, ptfe membrane, ptfe molded, ptfe o-ring, ptfe packing, ptfe pellet, ptfe plastic, ptfe powder, ptfe pump, ptfe resin, ptfe rod, ptfe seal, ptfe sheet, ptfe sintered, ptfe skived, ptfe slide, ptfe spray, ptfe tape, ptfe thread seal, ptfe tube, ptfe valve, ptfe washer, pvdf fluoropolymer, recycled ptfe, solvay solexis, t-fal, tefal, teflon, teflon coating, teflon tape, tfm, thread seal tape
Polytetrafluoroethylene (PTFE): generic subtypes (industry average)- PTFE Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polytetrafluoroethylene (PTFE). (Process ID: PR0804000558)
- Description: Production of PTFE using fluorocarbons - Polytetrafluoroethylene represents a stable and inert synthetic fluoropolymer with a composition of carbon and fluorine. Workers use PTFE for durable waterproof barriers in apparel and in a wide variety of products including medical devices, communications technology, and energy efficient transportation.
- Characteristic: Synthetic
- Geography of data: Germany, Netherlands, United Kingdom
- Data source: Data from Sphera: Polytetrafluoroethylene granulate (PTFE) Mix https://lcadatabase.sphera.com/2024/xml-data/processes/1d892f94-5e26-4248-a15e-4938a3fc05ca.xml Data from Sphera: Polytetrafluoroethylene granulate (PTFE) https://lcadatabase.sphera.com/2024/xml-data/processes/bf583d7c-5e9a-4a44-9892-023d0ab1b7d5.xml Data from Sphera: Polytetrafluoroethylene granulate (PTFE) https://lcadatabase.sphera.com/2024/xml-data/processes/7d079263-90a1-4cb4-ad7f-618d92f000ba.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Molding: Hot Compression, Blow Molding, Injection Molding
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Hot Compression, Thermoforming, Extrusion, Injection Molding; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0009; MSI 3.12
Polyvinyl Acetate (PVA) represents a Plastics material in MatLib. It includes 1 generic subtype (PVA Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: carpenter's glue, carpenters glue, celvolit, chang chun pva, craft glue, dairen pva, elmer's glue, elmers glue, kuraray poval, mowilith, nippon gohsei, p.v.a., poly vinyl acetate, poly-vinyl acetate, polyvinyl acetate, polyvinyl alcohol, pva, pva adhesive, pva bag, pva binder, pva cement additive, pva concrete, pva dispersion, pva emulsion, pva fiber, pva fibre, pva film, pva glue, pva latex, pva mortar, pva packaging, pva paper coating, pva plastic, pva pouch, pva primer, pva sealer, pva sizing, pva textile sizing, pva warp sizing, pva water-soluble, pvac, pvac resin, pvoh, ravemul, recycled pva, school glue, sekisui pva, vinavil, vinnapas, water-soluble pva, white glue, wood glue
Polyvinyl Acetate (PVA): generic subtypes (industry average)- PVA Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polyvinyl Acetate (PVA). (Process ID: PR0804000170)
- Description: VAM production occurs through the reaction of ethylene and acetic acid with oxygen, conducted in the gas phase at elevated temperatures over a heterogeneous palladium catalyst. This production path, represented in this dataset, accounts for about 80 percent of worldwide industrial production; a less common production route relies on the reaction of acetylene with acetic acid.
- Characteristic: Synthetic
- Geography of data: US
- Data source: Data from Sphera: Vinyl acetate (Acetic acid vinyl ester, VAM) https://lcadatabase.sphera.com/2024/xml-data/processes/42f627c8-7b79-4640-b22e-3190a93db685.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Molding: Injection Molding, Blow Molding, Hot Compression
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Thermoforming, Injection Molding, Hot Compression, Extrusion; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0019; MSI 3.12
Polyvinyl Chloride (PVC) represents a Plastics material in MatLib. It includes 1 generic subtype (PVC Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: bio-attributed pvc, bio-pvc, chlorinated pvc, cpvc, dehp-free pvc, e-pvc, emulsion pvc, flexible pvc, formosa plastics pvc, geon, ineos pvc, inovyn, kaneka pvc, mass pvc, mexichem pvc, p.v.c., phthalate-free pvc, plasticised pvc, plasticized pvc, poly vinyl chloride, poly-vinyl chloride, polyvinyl chloride, post-consumer pvc, post-industrial pvc, pvc, pvc alloy, pvc banner, pvc blow molding, pvc buckle, pvc button, pvc calendering, pvc cladding, pvc coated, pvc coated fabric, pvc compound, pvc cord, pvc door, pvc extrusion, pvc eyelet, pvc film, pvc fitting, pvc geomembrane, pvc granule, pvc grommet, pvc gutter, pvc hose, pvc injection, pvc label, pvc laminate, pvc leather, pvc logo, pvc masterbatch, pvc membrane, pvc mesh, pvc paste, pvc patch, pvc pellet, pvc pipe, pvc piping trim, pvc plastic, pvc plastisol, pvc profile, pvc resin, pvc roofing, pvc sheet, pvc sole, pvc strap, pvc synthetic leather, pvc tarpaulin, pvc trim, pvc tube, pvc tubing, pvc upper, pvc webbing, pvc window, pvc zipper pull, pvc-abs, pvc-p, pvc-u, recycled pvc, rigid pvc, rpvc, s-pvc, shintech, solvay pvc, suspension pvc, unplasticised pvc, unplasticized pvc, upvc, vestolit, vinnolit, vinyl, vinyl chloride copolymer, vinyl coated fabric, vinyl film, vinyl flooring, vinyl leather, vinyl plastic, vinyl sheet, vinyl tile, vinyl trim, vinyloop, westlake pvc
Polyvinyl Chloride (PVC): generic subtypes (industry average)- PVC Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Polyvinyl Chloride (PVC). (Process ID: PR0804000619)
- Description: Polymerisation of vinyl chloride monomer to polyvinyl chloride PVC produces PVC. Plasticizers do not get included in this process model.
- Characteristic: Synthetic
- Geography of data: US
- Data source: Data from Sphera: Polyvinyl chloride granulate (Suspension, S-PVC) https://lcadatabase.sphera.com/2024/xml-data/processes/c3dd7958-9642-47c4-a265-de4378858593.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Molding: Hot Compression, Injection Molding, Blow Molding
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Extrusion, Hot Compression, Injection Molding, Thermoforming; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0016; MSI 3.12
Silicone represents a Plastics material in MatLib. It includes 1 generic subtype (Silicone Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: addition-cure silicone, bio-based silicone, condensation-cure silicone, dimethicone, dow corning silicone, dow silicone, elastosil, elkem silicone, htv silicone plastic, kcc silicone, liquid silicone plastic, lsr plastic, momentive silicone, pdms, platinum cure silicone, platinum-cure silicone, polydimethylsiloxane, polysiloxane, recycled silicone, room-temperature vulcanizing, rtv silicone, semicosil, shin-etsu silicone, silicone adhesive, silicone aquarium, silicone bakeware mold, silicone caulk, silicone compound, silicone conformal coating, silicone emulsion, silicone encapsulant, silicone fluid, silicone gel, silicone grease, silicone ice tray, silicone joint, silicone masterbatch, silicone mold, silicone mould, silicone oil, silicone pellet, silicone potting, silicone release agent, silicone resin, silicone rod plastic, silicone rubber (plastic form), silicone sealant, silicone sheet plastic, silicone softener, silicone spatula plastic, silicone spray, silicone tube plastic, silicone water repellent, silicone weatherseal, silopren, tin-cure silicone, wacker silicone
Silicone: generic subtypes (industry average)- Silicone Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Silicone. (Process ID: PR0804000563)
- Description: The base component of RTV silicon rubber (RTV-2, Condensation) contains a hydroxyl-end-capped polydimethylsiloxane which contains nonreinforcing fillers, unreactive silicone fluid, and pigments, as well as small amounts of water.
- Characteristic: Synthetic
- Geography of data: Germany
- Data source: Data from Sphera: Silicone rubber (RTV-2, condensation) https://lcadatabase.sphera.com/2024/xml-data/processes/f1d67c0a-3fc7-4e5b-9399-b20d310dc8d6.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Molding: Injection Molding, Blow Molding, Hot Compression
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Extrusion, Thermoforming, Injection Molding, Hot Compression; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0002; MSI 3.12
Thermoplastic Polyurethane (TPU) represents a Plastics material in MatLib. It includes 2 generic subtypes (TPU Plastic, Recycled TPU Plastic) and 1 contributed trade name from BASF.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: 3d printed tpu, 80a tpu, 85a tpu, 90a tpu, 95a tpu, aliphatic tpu, api tpu, aromatic tpu, basf tpu, bio tpu, bio-based tpu, clear tpu, covestro tpu, desmopan, elastollan, epaflex, estane, fdm tpu, hard tpu, huntsman tpu, irogran, krystalgran, laripur, lubrizol tpu, miracll tpu, pearlthane, pellethane, polycaprolactone tpu, polyester tpu, polyether tpu, ravathane, recyclable tpu, recycled tpu, shore a tpu, shore d tpu, sls tpu, soft tpu, t.p.u., texin, thermoplastic poly-urethane, thermoplastic polyurethane, thermoplastic pu, tpu, tpu adhesive, tpu badge, tpu band, tpu blow molding, tpu cage, tpu calendered, tpu case, tpu cast, tpu coated fabric, tpu coating, tpu compound, tpu cord, tpu dip, tpu elastic, tpu extrusion, tpu eyelet, tpu filament, tpu film, tpu granule, tpu heel counter, tpu hose, tpu hot melt, tpu injection, tpu laminate, tpu logo, tpu masterbatch, tpu membrane, tpu midsole, tpu outsole, tpu overlay, tpu pellet, tpu plastic, tpu print, tpu resin, tpu shank, tpu sheet, tpu skin, tpu spray, tpu strap, tpu toe cap, tpu tube, tpu waterproof membrane, tpu webbing, tpu wire coating, tpu zipper, transparent tpu, utechllan, wanhua tpu
Thermoplastic Polyurethane (TPU): generic subtypes (industry average)- TPU Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Thermoplastic Polyurethane (TPU). (Process ID: PR0804000213)
- Description: Thermoplastic Polyurethane (TPU) plastic represents a type of Thermorplastic Elastomer (TPE) which functions as a polymer/copolymer having both thermoplastic and elastomeric properties. The dataset represents hard polyether based TPU.
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Data created based on feedback from industry experts and literature.
- Recycled TPU Plastic: Users click at Raw Materials (PL-P001) via Recycling; default representative for Thermoplastic Polyurethane (TPU). (Process ID: PR0804000684)
- Description: This process covers the production of mechanically recycled polyurethane. The inventory includes the input of sodium hydroxide, inorganic chemicals, heat, and electricity and covers the wasteflow of the processing waste.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Based on WALDB and GaBi background data.
- Elastollan® TPU Plastic [BASF], contributed by BASF: Users click at Raw Materials (PL-P001) as Polymerization. (Process ID: PR0804000580)
- Description: Elastollan® represents the brand name for thermoplastic polyurethane (TPU) from BASF. It stands for maximum reliability, consistent product quality, and cost efficiency. Workers can extrude Elastollan® into hoses, cable sheathing, belts, films, and profiles, and can also process it using blow molding and injection molding technologies. Elastollan® features an extraordinary property profile combining elasticity with resistance over a wide range of temperatures. It demonstrates abrasion- and impact-resistance, has good elastic recovery, resists tearing and kinking, and demonstrates oil- and grease-resistance. Moreover, users can modify Elastollan® for specific applications, through glass-fiber reinforcement, for instance. https://plastics-rubber.basf.com/global/en/performance_polymers/industries/pp_automotive/products/elastollan
- Characteristic: Synthetic
- Geography of data: Global
- Data source: Based on submitted data.
- Raw Materials (PL-P001)
- Polymerization: Polymerization; trade names: Elastollan® TPU Plastic [BASF]
- transforms Fossil Fuel into Resin or Pellet
- Recycling: Recycling
- transforms Post-Consumer Waste into Resin or Pellet
- Default at this stage: Polymerization, Recycling
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Molding: Injection Molding, Hot Compression, Blow Molding
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Default at this stage: Injection Molding
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Thermoforming, Injection Molding, Hot Compression, Extrusion; other processes here maintain their standard MSI value
- Users can click "No process" at this stage
Metadata: material type Plastics (PL); material code PL0012; MSI 3.12
Thermoset Polyurethane (PU) represents a Plastics material in MatLib. It includes 1 generic subtype (PU Plastic) and 0 contributed trade names.
Users can link Supplier facility (FEM) data at: Molding or Curing (PL-P003). Raw materials always use MSI data.
Also known as / search terms: 2k pu, abrasion-resistant pu, adiprene, basf pu thermoset, baydur, cast polyurethane, cast pu, centrifugal cast pu, chemtura pu, compression molded pu, conathane, covestro pu thermoset, crosslinked polyurethane, crosslinked pu, cured polyurethane, cured pu, dow pu thermoset, energy-return pu, freeman pu, gravity pour pu, high-resilience pu, hr pu, huntsman pu thermoset, isocyanate pu, mdi polyurethane, mdi-based pu, microcellular pu, open-cast pu, polyol pu, polyurethane elastomer, polyurethane plastic, pu block, pu bumper, pu bushing, pu casting, pu elastomer, pu encapsulant, pu gasket, pu integral skin, pu mold, pu mould, pu pad, pu plastic, pu potting, pu pour, pu prepolymer, pu resin thermoset, pu roller, pu rubber, pu seal, pu thermoset resin, pu wheel, reaction injection molding, reaction injection moulding, rim, rim polyurethane, rim pu, rrim, self-skinning pu, shore a pu, shore d pu, smooth-on pu, solid pu, tdi polyurethane, tdi-based pu, thermoset polyurethane, thermoset polyurethane plastic, thermoset pu, thermoset pu plastic, two-component pu, two-part pu, uralite, vibrathane, vulkollan, wanhua pu thermoset
Thermoset Polyurethane (PU): generic subtypes (industry average)- PU Plastic: Users click at Raw Materials (PL-P001) via Polymerization; default representative for Thermoset Polyurethane (PU). (Process ID: PR0804000214)
- Description: Thermoset polyurethane resin functions as a prepolymer liquid resin that workers form into rigid plastic parts through a curing process.
- Characteristic: Synthetic
- Geography of data: Europe
- Data source: Data from Sphera: Solvent-based polyurethane adhesive for the shoe industry (estimation) https://lcadatabase.sphera.com/2024/xml-data/processes/fd9d99aa-aa55-4851-942d-ef972402e6e9.xml
- Raw Materials (PL-P001)
- Polymerization: Polymerization
- transforms Fossil Fuel into Resin or Pellet
- Default at this stage: Polymerization
- Country of manufacture and supplier facility (FEM) data do not change this stage: raw materials always use MSI data with the global-average electricity grid
- Mixing or Preparation (PL-P002)
- Compounding: Master Batch Blending
- transforms Resin or Pellet into Compounded Material
- Default at this stage: Master Batch Blending
- Supplier facility (FEM) data: not available at this stage
- Country of manufacture: changes the electricity part of every process at this stage
- Users can click "No process" at this stage
- Molding or Curing (PL-P003)
- Thermoforming: Thermoforming
- transforms Compounded Material into Finished Plastic
- Molding: Injection Molding, Blow Molding, Hot Compression
- transforms Compounded Material into Finished Plastic/Formed Part
- Casting: Bulk Pouring
- transforms Compounded Material into Finished Plastic
- Extrusion: Extrusion
- transforms Compounded Material into Finished Plastic
- Default at this stage: Bulk Pouring
- Supplier facility (FEM) data: users can apply at this stage
- Country of manufacture: changes the electricity part of Thermoforming, Injection Molding, Bulk Pouring, Extrusion, Hot Compression; other processes here maintain their standard MSI value
- Users can click "No process" at this stage