Skip to content
  • There are no suggestions because the search field is empty.

Materials Reference: Rubber

This reference covers every Rubber material in MatLib (14 materials: Butyl Rubber, Chloroprene (Neoprene), Ethylene Propylene Diene Elastomer (EPDM), Foamed Rubber, Isoprene Rubber (IR), Natural Rubber (NR)...) with its generic subtypes, lifecycle stages, default and alternate processes, and contributed trade names, from MSI 3.12.


Also known as: Rubber, Rubber materials, MatLib, material subtypes, lifecycle stages, processes, trade names, Butyl Rubber, Chloroprene (Neoprene), Ethylene Propylene Diene Elastomer (EPDM), Foamed Rubber, Isoprene Rubber (IR), Natural Rubber (NR), Nitrile Rubber (NBR), Polybutadiene (BR), Silicone Rubber, Styrene-Butadiene (SBR), Thermoplastic Elastomer (TPE), Thermoplastic Polyurethane (TPU), Thermoset Polyurethane (PU), Typical Footwear Rubber Compound.

Material Type: Rubber

Metadata: material type code RU; 14 materials; MSI 3.12


Rubber materials move through these lifecycle stages in order:


  • Raw Materials (RU-P001): constituent stage
  • Mixing or Preparation (RU-P002): constituent stage
  • Molding or Curing (RU-P003): constituent stage
  • Finishing (RU-P004): constituent stage

Rubber contains these materials: Butyl Rubber, Chloroprene (Neoprene), Ethylene Propylene Diene Elastomer (EPDM), Foamed Rubber, Isoprene Rubber (IR), Natural Rubber (NR), Nitrile Rubber (NBR), Polybutadiene (BR), Silicone Rubber, Styrene-Butadiene (SBR), Thermoplastic Elastomer (TPE), Thermoplastic Polyurethane (TPU), Thermoset Polyurethane (PU), Typical Footwear Rubber Compound.

Butyl Rubber (Rubber)

Metadata: material type Rubber (RU); material code RU0008; MSI 3.12


MatLib includes Butyl Rubber. It offers 1 generic subtype (Butyl Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: biir, bromobutyl, butyl, butyl gasket, butyl inner tube, butyl membrane, butyl seal, chlorobutyl, ciir, exxon butyl, exxonmobil butyl, halobutyl, halobutyl rubber, iir, isobutylene isoprene rubber, lanxess butyl

Butyl Rubber: generic subtypes (industry average) Butyl Rubber: lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Molding: Injection Molding, Hot Compression
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Injection Molding, Hot Compression, Bulk Pouring. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Chloroprene (Neoprene) (Rubber)

Metadata: material type Rubber (RU); material code RU0007; MSI 3.12


MatLib includes Chloroprene (Neoprene). It offers 1 generic subtype (Chloroprene (Neoprene)) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: baypren, chloroprene, chloroprene rubber, cr, cr rubber, denka chloroprene, dupont neoprene, neoprene, neoprene foam, neoprene glove, neoprene sheet, neoprene sleeve, neoprene wetsuit, poly-chloroprene, polychloroprene, skyprene

Chloroprene (Neoprene): generic subtypes (industry average)
  • Chloroprene (Neoprene): Check at Raw Materials (RU-P001) via Polymerization. This option represents Chloroprene (Neoprene) by default. (Process ID: PR0804000037)
Chloroprene (Neoprene): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Molding: Hot Compression, Injection Molding
      • turns Mixed Compound into Cured Rubber Part
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Hot Compression, Bulk Pouring, Injection Molding. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Ethylene Propylene Diene Elastomer (EPDM) (Rubber)

Metadata: material type Rubber (RU); material code RU0014; MSI 3.12


MatLib includes Ethylene Propylene Diene Elastomer (EPDM). It offers 1 generic subtype (EPDM Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: buna ep, dutral, e.p.d.m., ep rubber, epdm, epdm gasket, epdm hose, epdm membrane, epdm roofing, epdm rubber, epdm seal, epdm tubing, epdm weatherstrip, epm, ethylene propylene diene, ethylene propylene diene monomer, ethylene propylene rubber, ethylene-propylene-diene monomer, keltan, nordel, royalene, vistalon

Ethylene Propylene Diene Elastomer (EPDM): generic subtypes (industry average)
  • EPDM Rubber: Check at Raw Materials (RU-P001) via Polymerization. This option represents Ethylene Propylene Diene Elastomer (EPDM) by default. (Process ID: PR0804000612)
Ethylene Propylene Diene Elastomer (EPDM): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Molding: Injection Molding, Hot Compression
      • turns Mixed Compound into Cured Rubber Part
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Bulk Pouring, Injection Molding, Hot Compression. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Foamed Rubber (Rubber)

Metadata: material type Rubber (RU); material code RU0006; MSI 3.12


MatLib includes Foamed Rubber. It offers 1 generic subtype (Foamed Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: aeroflex, armaflex, blown rubber, blown rubber foam, cellular rubber, chloroprene foam, closed-cell neoprene, closed-cell rubber, cr foam, crumb rubber foam, die-cut foam rubber, epdm foam, epdm sponge, expanded rubber, extruded foam rubber, foam rubber, foam rubber gasket, foam rubber mat, foam rubber pad, foam rubber seal, foam rubber sheet, foam rubber underlay, kaiflex, latex foam, latex foam rubber, micro-cellular rubber, microcellular rubber, molded foam rubber, moulded foam rubber, natural rubber foam, nbr foam, neoprene foam, neoprene sponge, neoprene wetsuit, nitrile foam, nr foam, open-cell neoprene, open-cell rubber, recycled foam rubber, rubatex, rubber foam, rubber foam cushion, rubber foam gasket strip, rubber foam insole, rubber foam insulation, rubber foam midsole, rubber foam padding, rubber foam roll, rubber foam tape, rubber sponge cord, rubber sponge sheet, rubber sponge strip, sbr foam, sbr sponge, silicone foam, silicone sponge, sponge rubber, sponge-rubber, vulcanised rubber foam, vulcanized rubber foam, wetsuit foam

Foamed Rubber: generic subtypes (industry average)
  • Foamed Rubber: Check at Raw Materials (RU-P001) via Polymerization. This option represents Foamed Rubber by default. (Process ID: PR0804000072)
    • Description: This polybutadiene-based foamed rubber product results from using a foaming agent with polybutadiene to create an air-filled matrix. Manufacturers can spray, pour, or mold foamed rubbers into applications.
    • Characteristic: Synthetic
    • Geography of data: Germany
    • Data source: Polymer foaming process based on literature and GaBi background data. Rubber data from Sphera: Polybutadiene granulate (PB) mix https://lcadatabase.sphera.com/2024/xml-data/processes/67eefbe0-d772-4f44-85e9-09e8b54672f1.xml
Foamed Rubber: lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Molding: Injection Molding, Hot Compression
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Injection Molding, Bulk Pouring, Hot Compression. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Isoprene Rubber (IR) (Rubber)

Metadata: material type Rubber (RU); material code RU0005; MSI 3.12


MatLib includes Isoprene Rubber (IR). It offers 1 generic subtype (Isoprene Rubber (IR)) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: 4-polyisoprene, amyris isoprene, anionic ir, balata, bio-isoprene, cariflex ir, cis-1, condom ir, dandelion rubber, genencor isoprene, goodyear ir, guayule rubber, gutta-percha, high-cis ir, ir, ir blend, ir compound, ir elastomer, ir glove, ir latex, ir medical, ir rubber, isoprene rubber, jsr ir, kraton ir, kraton ir rubber, kuraray ir, lithium-catalyzed ir, natsyn, nr replacement, nr substitute, pharmaceutical ir, polyisoprene, renewable isoprene, russian dandelion, ski-3, surgical glove ir, synthetic cis-polyisoprene, synthetic isoprene, synthetic isoprene rubber, synthetic natural rubber, synthetic polyisoprene, taraxacum kok-saghyz, tks rubber, trans-polyisoprene, ziegler-natta ir

Isoprene Rubber (IR): generic subtypes (industry average)
  • Isoprene Rubber (IR): Check at Raw Materials (RU-P001) via Polymerization. This option represents Isoprene Rubber (IR) by default. (Process ID: PR0804000096)
    • Description: Isoprene appears as a naturally occurring compound found in many plants. It has a similar composition to natural rubber. However, manufacturers derive the vast majority of commercially produced Isoprene from thermal cracking of naphtha as a co-product during ethylene production.
    • Characteristic: Synthetic
    • Geography of data: Germany
    • Data source: Proxy data from Sphera: Styrene-butadiene rubber (S-SBR) mix https://lcadatabase.sphera.com/2024/xml-data/processes/9b317e5c-a721-4912-bb28-06bd6b6fbe9f.xml
Isoprene Rubber (IR): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Molding: Hot Compression, Injection Molding
      • turns Mixed Compound into Cured Rubber Part
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Hot Compression, Bulk Pouring, Injection Molding. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Natural Rubber (NR) (Rubber)

Metadata: material type Rubber (RU); material code RU0003; MSI 3.12


MatLib includes Natural Rubber (NR). It offers 1 generic subtype (Natural Rubber (NR)) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: block rubber, caoutchouc, concentrated latex, crepe rubber, cup lump, dry rubber, gum rubber, hevea, hevea brasiliensis, hevea rubber, latex, latex rubber, n.r., natural latex, natural rubber, natural rubber latex, nr, nrl, para rubber, plantation rubber, ribbed smoked sheet, rss, sheet rubber, sir, smoked sheet, smoked sheet rubber, standard thai rubber, str, svr, tapped rubber, technically specified rubber, tsr

Natural Rubber (NR): generic subtypes (industry average)
  • Natural Rubber (NR): Check at Raw Materials (RU-P001) via Cultivation. This option represents Natural Rubber (NR) by default. (Process ID: PR0804000121)
    • Description: Tapped latex represents the basic raw material for producing natural rubber (NR). Manufacturers extract it from latex-containing plants. Latex contains approximately 30-40% rubber particles and 55-65% water, plus small amounts of protein, sterol glycosides, resins, ash, and sugars.
    • Characteristic: Natural
    • Geography of data: Germany
    • Data source: Data from Sphera: Natural rubber (NR) https://lcadatabase.sphera.com/2024/xml-data/processes/ea050d44-4f55-4520-a650-6c4e2f25b3a2.xml
Natural Rubber (NR): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Cultivation: Cultivation
      • turns Natural Latex into Raw Rubber or Elastomer
    • Default at this stage: Cultivation
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Molding: Injection Molding, Hot Compression
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Nitrile Rubber (NBR) (Rubber)

Metadata: material type Rubber (RU); material code RU0004; MSI 3.12


MatLib includes Nitrile Rubber (NBR). It offers 1 generic subtype (Nitrile Rubber (NBR)) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: acrylonitrile butadiene rubber, acrylonitrile-butadiene rubber, arlanxeo nbr, bound nbr, buna n, buna-n, bunan, carboxylated nitrile, disposable nitrile, europrene n, exam nitrile, fuel-resistant rubber, h-nbr, high acn nbr, hnbr, hydrogenated nitrile, industrial nitrile, jsr n, krynac, kumho nbr, lanxess nbr, liquid nbr, low acn nbr, medium acn nbr, n.b.r., nancar, nbr, nbr blend, nbr compound, nbr elastomer, nbr latex, nbr rubber, nbr-pvc blend, nipol, nippon zeon, nitrile, nitrile bellows, nitrile boot, nitrile butadiene rubber, nitrile coated, nitrile cord, nitrile diaphragm, nitrile dipped, nitrile elastomer, nitrile foam, nitrile gasket, nitrile glove, nitrile grommet, nitrile hose, nitrile o-ring, nitrile roll, nitrile rubber, nitrile seal, nitrile sheet, nitrile sponge, nitrile washer, oil-resistant rubber, perbunan, powdered nbr, x-nbr, xnbr, zeon nbr

Nitrile Rubber (NBR): generic subtypes (industry average)
  • Nitrile Rubber (NBR): Check at Raw Materials (RU-P001) via Polymerization. This option represents Nitrile Rubber (NBR) by default. (Process ID: PR0804000123)
    • Description: Manufacturers produce Nitrile butadiene rubber (NBR) by copolymerizing acrylonitrile and butadiene. The resulting emulsion manufacturers process into solid rubber. Manufacturers produce Nitrile rubber through emulsion polymerization. They prepare the emulsion by adding emulsifiers and an initiator.
    • Characteristic: Synthetic
    • Geography of data: Germany
    • Data source: Data from Sphera: Nitrile butadiene rubber (NBR, 33% acrylonitrile) https://lcadatabase.sphera.com/2024/xml-data/processes/794b5228-6948-4587-bbe6-af2ceb1544e7.xml
Nitrile Rubber (NBR): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Molding: Hot Compression, Injection Molding
      • turns Mixed Compound into Cured Rubber Part
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Hot Compression, Injection Molding, Bulk Pouring. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Polybutadiene (BR) (Rubber)

Metadata: material type Rubber (RU); material code RU0001; MSI 3.12


MatLib includes Polybutadiene (BR). It offers 2 generic subtypes (Recycled Polybutadiene (BR) Rubber, Polybutadiene (BR) Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: 4-polybutadiene, arlanxeo br, br, br blend, br compound, br elastomer, br rubber, budene, budene 1207, budene 1208, buna cb, buna cb nd, butadiene elastomer, butadiene rubber, cis-1, cis-br, co-br, cobalt br, emulsion br, europrene, europrene br, europrene br 40, europrene neocis, golf ball br, high abrasion br, high cis br, high resilience br, high-cis br, high-cis polybutadiene, jsr br, kumho br, lanxess br, li-br, lithium br, low-cis polybutadiene, nd-br, neodymium br, ni-br, nickel br, nr-br blend, pbr, polybutadiene, polybutadiene rubber, sbr-br blend, shoe sole br, solution br, taktene, taktene 1220, tire sidewall br, tire tread br, tyre compound br, ube br, zeon br

Polybutadiene (BR): generic subtypes (industry average)
  • Recycled Polybutadiene (BR) Rubber: Check at Raw Materials (RU-P001) via Mechanical Recycling. This option represents Polybutadiene (BR) by default. (Process ID: PR0804000522)
    • Description: This process covers mechanical recycling of Polybutadiene. The inventory includes tap water input, transport, heat, and electricity for grinding and trituration. It covers wasteflows of processing waste to incineration and landfill according to European share. Grinding involves transport from crushing plant cellars. Materials pass through a primary milling process, in which the tire disintegrates, then proceed through crushing, where many steel wheels remove material. The third fine grinding process extracts textile fiber along with remaining steel, producing ground rubber.
    • Sustainability attribute: Recycled
    • Characteristic: Synthetic
    • Geography of data: Global/generic
    • Data source: Based on WALDB and GaBi background data.
  • Polybutadiene (BR) Rubber: Check at Raw Materials (RU-P001) via Polymerization. This option represents Polybutadiene (BR) by default. (Process ID: PR0804000150)
Polybutadiene (BR): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Recycling: Mechanical Recycling
      • turns Post-Consumer Waste into Raw Rubber or Elastomer
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Mechanical Recycling, Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Molding: Hot Compression, Injection Molding
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Hot Compression, Injection Molding, Bulk Pouring. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Silicone Rubber (Rubber)

Metadata: material type Rubber (RU); material code RU0009; MSI 3.12


MatLib includes Silicone Rubber. It offers 1 generic subtype (Silicone Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: addition-cure silicone, compression molded silicone, condensation-cure silicone, dehesive, dimethyl silicone, dow silicone, elastosil, elkem silicone, fda silicone, fluorosilicone, fluorosilicone rubber, fmq, food grade silicone, food-grade silicone, fvmq, hcr silicone, high consistency rubber, high-consistency rubber silicone, htv silicone, injection molded silicone, kcc silicone, liquid silicon rubber, liquid silicone rubber, lsr, medical grade silicone, medical silicone, momentive silicone, peroxide-cured silicone, phenyl silicone, platinum-cured silicone, pvmq, reclaimed silicone, recycled silicone, room temperature vulcanizing silicone, rtv silicone, rtv-1, rtv-2, semicosil, shin-etsu silicone, si, silastic, silicone, silicone baby, silicone bakeware, silicone band, silicone bracelet, silicone button, silicone catheter, silicone cord, silicone elastomer, silicone extrusion, silicone gasket, silicone hose, silicone implant, silicone keypad, silicone molding, silicone moulding, silicone nipple, silicone o-ring, silicone pacifier, silicone profile, silicone seal, silicone sheet, silicone spatula, silicone strap, silicone strip, silicone swim cap, silicone tubing, silicone watch band, silicone wristband, silopren, transfer molded silicone, vmq, wacker silicone, zhonghao chenguang

Silicone Rubber: generic subtypes (industry average)
  • Silicone Rubber: Check at Raw Materials (RU-P001) via Polymerization. This option represents Silicone Rubber by default. (Process ID: PR0804000564)
Silicone Rubber: lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Molding: Hot Compression, Injection Molding
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Hot Compression, Injection Molding, Bulk Pouring. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Styrene-Butadiene (SBR) (Rubber)

Metadata: material type Rubber (RU); material code RU0002; MSI 3.12


MatLib includes Styrene-Butadiene (SBR). It offers 1 generic subtype (Styrene-Butadiene (SBR) Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: buna s, buna-s, bunas, e-sbr, emulsion sbr, esbr, outsole sbr, s-sbr, s.b.r., sbr, sbr rubber, shoe sole rubber, solution sbr, ssbr, styrene butadiene rubber, styrene-butadiene rubber, synthetic rubber, synthetic rubber sbr, tire rubber, tyre rubber

Styrene-Butadiene (SBR): generic subtypes (industry average) Styrene-Butadiene (SBR): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Molding: Injection Molding, Hot Compression
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Injection Molding, Bulk Pouring, Hot Compression. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Thermoplastic Elastomer (TPE) (Rubber)

Metadata: material type Rubber (RU); material code RU0011; MSI 3.12


MatLib includes Thermoplastic Elastomer (TPE). It offers 1 generic subtype (TPE Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: arnitel, asahi sebs, avient tpe, bio-based tpe, cawiton, clear tpe, co-injection tpe, colored tpe, dryflex, dynaflex, elastron, hard tpe, hexpol tpe, hybrar, hytrel, kraiburg tpe, kraton d, kraton fg, kraton g, kuraray sebs, overmolded tpe, pebax, polyone tpe, ravago tpe, recycled tpe, rtp tpe, rtpe, santoprene, sbs, sbs compound, sebs, sebs compound, sebs rubber, seps, shore a tpe, shore d tpe, sis, sis compound, sofprene, soft touch tpe, soft tpe, soft-touch tpe, star thermoplastic, t.p.e., teknor apex tpe, thermo-plastic elastomer, thermoplastic elastomer, thermoplastic olefin, thermoplastic polyolefin, thermoplastic rubber, thermoplastic vulcanisate, thermoplastic vulcanizate, tpe, tpe band, tpe blow molding, tpe bumper, tpe cap, tpe compound, tpe connector, tpe extrusion, tpe film, tpe foot, tpe gasket, tpe granule, tpe grip, tpe grommet, tpe handle, tpe injection, tpe midsole, tpe outsole, tpe overmold, tpe overmould, tpe pellet, tpe plug, tpe resin, tpe rubber, tpe seal, tpe sheet, tpe sole, tpe strap, tpe-a, tpe-e, tpe-o, tpe-s, tpe-u, tpe-v, tpo, tpr, tpv, transparent tpe, tuftec, two-shot tpe, versaflex

Thermoplastic Elastomer (TPE): generic subtypes (industry average) Thermoplastic Elastomer (TPE): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Molding: Hot Compression, Injection Molding
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Hot Compression, Injection Molding, Bulk Pouring. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Thermoplastic Polyurethane (TPU) (Rubber)

Metadata: material type Rubber (RU); material code RU0013; MSI 3.12


MatLib includes Thermoplastic Polyurethane (TPU). It offers 2 generic subtypes (Soft Polyester Rubber, Soft Polyether Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: abrasion-resistant tpu, bio-based tpu rubber, calendered tpu rubber, clear tpu rubber, compression molded tpu rubber, desmopan rubber, elastollan rubber, estane rubber, flexible tpu, flexible tpu rubber, injection molded tpu rubber, pellethane rubber, recycled tpu rubber, shore a tpu rubber, shore d tpu rubber, soft tpu, soft tpu rubber, thermoplastic polyurethane rubber, tpu bumper, tpu cage, tpu cupsole, tpu elastomer, tpu foxing, tpu heel clip, tpu heel counter, tpu kick plate, tpu midsole rubber, tpu mudguard, tpu mudguard rubber, tpu outsole, tpu outsole rubber, tpu overlay, tpu overmold, tpu overmould, tpu plate, tpu rand, tpu rubber, tpu rubber compound, tpu shank, tpu sole rubber, tpu stabilizer, tpu toe box, tpu toe cap, tpu wrap, transparent tpu rubber

Thermoplastic Polyurethane (TPU): generic subtypes (industry average)
  • Soft Polyester Rubber: Check at Raw Materials (RU-P001) via Polymerization. (Process ID: PR0804000756)
    • Description: Thermoplastic Polyurethane (TPU) plastic represents a type of Thermoplastic Elastomer (TPE). It forms a polymer/copolymer having both thermoplastic and elastomeric properties. This dataset represents soft polyester-based TPU.
    • Characteristic: Synthetic
    • Geography of data: Global/generic
    • Data source: Data created based on feedback from industry experts and literature.
  • Soft Polyether Rubber: Check at Raw Materials (RU-P001) via Polymerization. This option represents Thermoplastic Polyurethane (TPU) by default. (Process ID: PR0804000568)
    • Description: Thermoplastic Polyurethane (TPU) plastic represents a type of Thermoplastic Elastomer (TPE). It forms a polymer/copolymer having both thermoplastic and elastomeric properties. This dataset represents soft polyether-based TPU.
    • Characteristic: Synthetic
    • Geography of data: Global/generic
    • Data source: Data created based on feedback from industry experts and literature.
Thermoplastic Polyurethane (TPU): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Molding: Hot Compression, Injection Molding
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Bulk Pouring, Hot Compression, Injection Molding. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Thermoset Polyurethane (PU) (Rubber)

Metadata: material type Rubber (RU); material code RU0010; MSI 3.12


MatLib includes Thermoset Polyurethane (PU). It offers 1 generic subtype (PU Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: 2k pu rubber, abrasion-resistant pu rubber, adiprene, cast polyurethane elastomer, cast polyurethane rubber, cast pu elastomer, cast pu rubber, conathane, crosslinked pu rubber, cured pu rubber, dip pu rubber, direct-inject pu, high-resilience pu rubber, hr pu rubber, liquid pu rubber, mdi pu rubber, millable polyurethane, millable pu, polyester pu rubber, polyether pu rubber, poured pu rubber, pu elastomer thermoset, pu rubber bumper, pu rubber bushing, pu rubber gasket, pu rubber midsole, pu rubber outsole, pu rubber pad, pu rubber roller, pu rubber seal, pu rubber sheet, pu rubber sole, pu rubber strip, pu rubber wheel, reaction molded pu rubber, shore a pu rubber, shore d pu rubber, tdi pu rubber, thermoset polyurethane rubber, thermoset pu elastomer, thermoset pu rubber, two-part pu rubber, vibrathane, vulcanized pu, vulkollan

Thermoset Polyurethane (PU): generic subtypes (industry average)
  • PU Rubber: Check at Raw Materials (RU-P001) via Polymerization. This option represents Thermoset Polyurethane (PU) by default. (Process ID: PR0804000060)
Thermoset Polyurethane (PU): lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Polymerization: Polymerization
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Polymerization
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Molding: Hot Compression, Injection Molding
      • turns Mixed Compound into Cured Rubber Part
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Hot Compression, Injection Molding, Bulk Pouring. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage
Typical Footwear Rubber Compound (Rubber)

Metadata: material type Rubber (RU); material code RU0012; MSI 3.12


MatLib includes Typical Footwear Rubber Compound. It offers 1 generic subtype (Footwear Rubber) and 0 contributed trade names.


You can link supplier facility (FEM) data at: Mixing or Preparation (RU-P002), Molding or Curing (RU-P003). Raw materials always use MSI data.


Also known as / search terms: adidas continental, bloom algae rubber, blown rubber, carbon rubber, carbon rubber outsole, cemented sole, cold cement sole, contagrip, continental rubber, continental rubber outsole, continental rubber sole, conventional rubber compound, dry grip rubber, durasole, eco rubber compound, five ten stealth, footwear rubber, footwear rubber compound, goodyear welt rubber, green rubber sole, gum crepe sole, gum rubber, gum rubber sole, gum sole, herringbone rubber, michelin rubber sole, natural gum sole, nike grind rubber, ortholite rubber, outsole compound, outsole rubber, plantation crepe sole, raw rubber sole, recycled rubber outsole, rice husk rubber, rubber cupsole, rubber cupsole compound, rubber foxing, rubber foxing compound, rubber grip, rubber heel, rubber heel counter, rubber lug, rubber outsole, rubber rand, rubber sole, rubber toe bumper, rubber toe cap, rubber traction, rubber unit sole, rubber waffle, salomon contagrip, shoe rubber, shoe rubber compound, shoe sole rubber, sole compound, solid rubber outsole, standard rubber compound, stealth rubber, sticky rubber, stitched rubber sole, traxion, typical rubber sole, typical shoe rubber, vibram, vibram ecostep, vibram freeride, vibram litebase, vibram megagrip, vibram sole, vibram xs trek, vulc sole, vulcanised rubber sole, vulcanized rubber sole, vulcanized sole, wet grip rubber

Typical Footwear Rubber Compound: generic subtypes (industry average)
  • Footwear Rubber: Check at Raw Materials (RU-P001) via Compounding. This option represents Typical Footwear Rubber Compound by default. (Process ID: PR0804000274)
    • Description: This typical compound for footwear rubber includes rubber inputs, vulcanizing and filler inputs, and other additives. The mixture contains 49.9% synthetic rubber, 5.5% natural rubber, 33.1% filler, and 11.5% additives and other inputs.
    • Characteristic: Blended
    • Geography of data: Global/generic
    • Data source: Based on literature sources and GaBi background data.
Typical Footwear Rubber Compound: lifecycle stages and processes
  • Raw Materials (RU-P001)
    • Compounding: Compounding
      • turns Fossil Fuel into Raw Rubber or Elastomer
    • Default at this stage: Compounding
    • Country of manufacture and supplier facility (FEM) data do not modify this stage. Raw materials always use MSI data with the global-average electricity grid.
  • Mixing or Preparation (RU-P002)
    • Mixing: Open Mill Mixing
      • turns Raw Rubber or Elastomer into Mixed Compound
    • Default at this stage: Open Mill Mixing
    • Supplier facility (FEM) data: you can apply this at this stage
    • Country of manufacture: changes the electricity part of every process at this stage
    • "No process" option: you can check this at this stage
  • Molding or Curing (RU-P003)
    • Casting: Bulk Pouring
      • turns Mixed Compound into Cured Rubber Part
    • Molding: Hot Compression, Injection Molding
      • turns Mixed Compound into Cured Rubber Part
    • Curing: Vulcanization
      • turns Mixed Compound into Cured Rubber Part
    • Default at this stage: Injection Molding
    • Supplier facility (FEM) data: you can apply this at this stage, except with these processes, which keep their MSI value ("Process cannot be linked. Using LCA defaults"): Vulcanization
    • Country of manufacture: changes the electricity part of Bulk Pouring, Hot Compression, Injection Molding. Other processes here keep their standard MSI value.
    • "No process" option: you can check this at this stage
  • Finishing (RU-P004)
    • Surface Finishing: Sidewall Buffing
      • turns Cured Rubber Part into Finished Rubber Part
    • Other: Other
      • turns Cured Rubber Part into Finished Rubber Part
    • Supplier facility (FEM) data: this stage does not offer this
    • Country of manufacture: changes the electricity part of every process at this stage