---
title: "Materials Reference: Synthetic Leather"
description: "Materials Reference: Synthetic Leather"
---

[Skip to content](https://support.worldly.io/materials-reference-synthetic-leather#main-content)

[Submit a request](https://support.worldly.io/kb-tickets/new?hsLang=en)

[![Worldly logo](https://support.worldly.io/hs-fs/hubfs/Worldly%20Media%20Kit/Worldly%20Logos/Worldly_LogoTM_Red.png?width=250&height=61&name=Worldly_LogoTM_Red.png)](https://support.worldly.io/?hsLang=en)

Open main navigation

Close main navigation

- [Submit a request](https://support.worldly.io/kb-tickets/new)

 How can we help?

- There are no suggestions because the search field is empty.

1. [Help Center](https://support.worldly.io/?hsLang=en)
2. [Product Impact Calculator (PIC)](https://support.worldly.io/product-impact-calculator-pic?hsLang=en)
3. [Material Library Reference Materials](https://support.worldly.io/product-impact-calculator-pic?hsLang=en#material-library-reference-materials)

# Materials Reference: Synthetic Leather

MatLib contains every Synthetic Leather material (1 materials: Polyurethane (PU) Synthetic Leather) with its generic subtypes, lifecycle stages, default and alternate processes, and contributed trade names, from MSI 3.12.

**Also known as:** Synthetic Leather, Synthetic Leather materials, MatLib, material subtypes, lifecycle stages, processes, trade names, Polyurethane (PU) Synthetic Leather.

 Material Type: Synthetic Leather

*Metadata: material type code SL; 1 materials; MSI 3.12*

Synthetic Leather materials in MatLib go through these lifecycle stages, in order:

- Substrate Raw Material (SL-P001): constituent stage
- PU Type (SL-P002): constituent stage
- Substrate Formation (SL-P003): constituent stage
- Production Process (SL-P004): constituent stage
- Specialty Application (SL-P005): constituent stage, users can check more than one process

Materials in Synthetic Leather: Polyurethane (PU) Synthetic Leather.

 Polyurethane (PU) Synthetic Leather (Synthetic Leather)

*Metadata: material type Synthetic Leather (SL); material code SL0001; MSI 3.12*

Polyurethane (PU) Synthetic Leather represents a Synthetic Leather material in MatLib. It includes 24 generic subtypes (Synthetic Leather Nylon 6 (65/35), Synthetic Leather PET(45/55), Synthetic Leather Splittable (65/35), Synthetic Leather 70 Polyester/30 Nylon (45/55), Synthetic Leather Sea-island (65/35), Synthetic Leather Splittable (55/45), Synthetic Leather PET(55/45), Synthetic Leather rPET (45/55), Synthetic Leather Splittable (75/25), Synthetic Leather Nylon 6 (75/25), Synthetic Leather rPET (55/45), Synthetic Leather Custom, Synthetic Leather PET(75/25), Synthetic Leather Sea-island (75/25), Synthetic Leather Sea-island (45/55), Synthetic Leather PET(65/35), Synthetic Leather Nylon 6 (45/55), Synthetic Leather 70 Polyester/30 Nylon (55/45), Synthetic Leather 70 Polyester/30 Nylon (65/35), Synthetic Leather Sea-island (55/45), Synthetic Leather 70 Polyester/30 Nylon (75/25), Synthetic Leather rPET (65/35), Synthetic Leather rPET (75/25), Synthetic Leather Nylon 6 (55/45)) and 0 contributed trade names.

Users cannot link supplier facility (FEM) data to Synthetic Leather materials. Every stage uses MSI data instead.

**Also known as / search terms:** alcantara, ambla, apparel pu leather, artificial leather, automotive pu leather, bag pu leather, baiksan, bi-cast leather, bicast, bio-based pu leather, bonded pu, clarino, daewon pu leather, direct coat pu, dmf-free pu leather, dry process pu leather, duksung, fabrikoid, faux leather, faux leather pu, faux suede, faux-cuir, faux-leather, filwel, huafon microfiber, imitation leather, kolon ardel, kuraray, kuraray clarino, leather-ette, leatherette, lorica, majilite, marine vinyl leather, microfiber leather, microfiber suede, microfibre leather, microfibre suede, nan ya pu leather, naugahyde, plant-based leather, pleather, polyurethane synthetic leather, pu coated leather, pu croc embossed, pu embossed leather, pu glitter leather, pu knit backing, pu laser-cut leather, pu leather, pu leather substrate, pu lining leather, pu lizard embossed, pu metallic leather, pu nonwoven leather, pu nubuck, pu patent leather, pu pebbled leather, pu perforated leather, pu smooth leather, pu snake embossed, pu split leather, pu synthetic leather, pu upholstery, pu upper, pu woven backing, pu-coated, pu-coated fabric leather, pu-leather, recycled pu leather, rexine, san fang pu leather, shoe pu leather, solvent-based pu leather, solvent-free pu leather, suedette, synth leather, synthetic leather, teijin cordley, tiziano, toray ecsaine, toray ultrasuede, transfer coat pu, ultrafabrics, ultrasuede, vegan leather pu, water-based pu leather, wet process pu leather

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 1 of 20: Synthetic Leather Nylon 6 (65/35))

- **Synthetic Leather Nylon 6 (65/35)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000602)
- Description: This process represents a substrate for a synthetic leather containing 65% substrate and 35% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Nylon 6 producers make Nylon 6 from caprolactam which they synthesize from benzene, ammonia, hydrogen and sulphuric acid (oleum). Via the intermediate products cyclohexane and cyclohexanone, producers make the monomer caprolactam. Producers create Nylon 6 by reacting caprolactam with water and producing the intermediate product aminocaproic acid. The acid forms from ring opening of caprolactam when water is added. Producers heat caprolactam and water to 250 degrees Celsius. Nylon 6 producers then form Nylon 6 by copolymerizing caprolactam and aminocaproic acid. Producers can carry out the process batchwise or continuously.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyamide 6 granulate (PA 6) [https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 2 of 20: Synthetic Leather PET(45/55))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather PET(45/55)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000725)
- Description: This process represents a substrate for a synthetic leather containing 45% substrate and 55% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Polyethylene terephthalate (abbreviated as PET or PETE, CAS number 25038-59-9) is a very common linear polymer best known for its use in manufacturing plastic bottles. Two major production paths exist for producing polyethylene terephthalate. The older process uses transesterification of dimethyl terephthalate as a precursor, and a more recently developed process relies on the direct esterification of terephthalic acid with ethylene glycol, modeled here. The terephthalic acid route offers advantages for its higher reaction rate, production of high molecular weight polymer chains, and lower use of ancillary inputs. In this reaction, ethylene glycol and terephthalic acid combine in the liquid phase with a catalyst, resulting in the esterification of the terephthalic acid. After separation of unreacted ethylene glycol, the reaction product mixes vigorously with a catalyst to instigate the polycondensation reaction, resulting in the final polymer product.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 3 of 20: Synthetic Leather Splittable (65/35) to Synthetic Leather 70 Polyester/30 Nylon (45/55))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather Splittable (65/35)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000608)
- Description: This process represents a substrate for a synthetic leather containing 65% substrate and 35% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Manufacturers produce polyester micro-fiber (splittable) substrate through a microfiber bonded web process. Producers then finish the resulting textile using pressure and heat to "split" the fibers, providing a greater surface area and increased flexibility.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Based on expert assumptions and GaBi background data. Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)
- **Synthetic Leather 70 Polyester/30 Nylon (45/55)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000727)
- Description: This process represents a substrate for a synthetic leather containing 45% substrate and 55% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Technology represents production out of hexamethylene diamine and adipic acid. For polyester, data come from the average unit process from the Eco-profiles of the European plastics industry. Average data show the production of amorphous PET out of ethylene glycol and PTA.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyamide 6 granulate (PA 6) [https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml) Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 4 of 20: Synthetic Leather Sea-island (65/35))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather Sea-island (65/35)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000606)
- Description: This process represents a substrate for a synthetic leather containing 65% substrate and 35% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Polyethylene terephthalate (abbreviated as PET or PETE, CAS number 25038-59-9) is a very common linear polymer best known for its use in manufacturing plastic bottles. Two major production paths exist for producing polyethylene terephthalate. The older process uses transesterification of dimethyl terephthalate as a precursor, and a more recently developed process relies on the direct esterification of terephthalic acid with ethylene glycol, modeled here. The terephthalic acid route offers advantages for its higher reaction rate, production of high molecular weight polymer chains, and lower use of ancillary inputs. In this reaction, ethylene glycol and terephthalic acid combine in the liquid phase with a catalyst, resulting in the esterification of the terephthalic acid. After separation of unreacted ethylene glycol, the reaction product mixes vigorously with a catalyst to instigate the polycondensation reaction, resulting in the final polymer product.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Based on expert assumptions and GaBi background data. Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 5 of 20: Synthetic Leather Splittable (55/45))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather Splittable (55/45)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000607)
- Description: This process represents a substrate for a synthetic leather containing 55% substrate and 45% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Manufacturers produce polyester micro-fiber (splittable) substrate through a microfiber bonded web process. Producers then finish the resulting textile using pressure and heat to "split" the fibers, providing a greater surface area and increased flexibility.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Based on expert assumptions and GaBi background data. Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 6 of 20: Synthetic Leather PET(55/45))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather PET(55/45)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000603)
- Description: This process represents a substrate for a synthetic leather containing 55% substrate and 45% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Polyethylene terephthalate (abbreviated as PET or PETE, CAS number 25038-59-9) is a very common linear polymer best known for its use in manufacturing plastic bottles. Two major production paths exist for producing polyethylene terephthalate. The older process uses transesterification of dimethyl terephthalate as a precursor, and a more recently developed process relies on the direct esterification of terephthalic acid with ethylene glycol, modeled here. The terephthalic acid route offers advantages for its higher reaction rate, production of high molecular weight polymer chains, and lower use of ancillary inputs. In this reaction, ethylene glycol and terephthalic acid combine in the liquid phase with a catalyst, resulting in the esterification of the terephthalic acid. After separation of unreacted ethylene glycol, the reaction product mixes vigorously with a catalyst to instigate the polycondensation reaction, resulting in the final polymer product.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 7 of 20: Synthetic Leather rPET (45/55) to Synthetic Leather Splittable (75/25))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather rPET (45/55)**: Users click this option at Substrate Raw Material (SL-P001) via Mechanical Recycling. (Process ID: PR0804000723)
- Description: This process represents a substrate for a synthetic leather containing 45% substrate and 55% coating, on a mass basis. Please click a substrate process with corresponding percentages in the “PU Type” stage. This process represents resin-specific environmental burdens associated with the production of secondary plastic pellets from post-consumer plastic scrap and used plastic products or packaging. The process includes a conservative estimate of 100 miles of transport of the waste plastic from location of discard (“curbside”), through locations of collection and to the recycling center. Within the recycling facility, professionals model washing, separation, granulation and pelletizing. This model applies mass allocation for the separation and cleaning of the mixed waste plastic, such that all plastics (PET, polypropylene, polystyrene), despite differing ease of separation, share the burdens of separation equally. The energy required for pelletization and compounding of the final plastic depends on the polymer type, based on the material properties (specific heat and enthalpy of fusion) of the resin.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Data from Sphera: Recycling of polyethylene terephthalate (PET) \[Cascale\] GUID: {50FF7133-4559-4414-818F-254367CB932B}
- **Synthetic Leather Splittable (75/25)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000155)
- Description: This process represents a substrate for a synthetic leather containing 75% substrate and 25% coating, on a mass basis. Please click a substrate process with corresponding percentages in the “PU Type” stage. Manufacturers produce polyester micro-fiber (splittable) substrate through a microfiber bonded web process. Producers then finish the resulting textile using pressure and heat to “split” the fibers, providing a greater surface area and increased flexibility.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Based on expert assumptions and GaBi background data. Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 8 of 20: Synthetic Leather Nylon 6 (75/25))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather Nylon 6 (75/25)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000131)
- Description: This process represents a substrate for a synthetic leather containing 75% substrate and 25% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Nylon 6 producers make Nylon 6 from caprolactam which they synthesize from benzene, ammonia, hydrogen and sulphuric acid (oleum). Via the intermediate products cyclohexane and cyclohexanone, producers make the monomer caprolactam. Producers create Nylon 6 by reacting caprolactam with water and producing the intermediate product aminocaproic acid. The acid forms from ring opening of caprolactam when water is added. Producers heat caprolactam and water to 250 degrees Celsius. Nylon 6 producers then form Nylon 6 by copolymerizing caprolactam and aminocaproic acid. Producers can carry out the process batchwise or continuously.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyamide 6 granulate (PA 6) [https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 9 of 20: Synthetic Leather rPET (55/45) to Synthetic Leather Custom)

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather rPET (55/45)**: Users click this option at Substrate Raw Material (SL-P001) via Mechanical Recycling. (Process ID: PR0804000593)
- Description: This process represents a substrate for a synthetic leather containing 55% substrate and 45% coating, on a mass basis. Please click a substrate process with corresponding percentages in the “PU Type” stage. This process represents resin-specific environmental burdens associated with the production of secondary plastic pellets from post-consumer plastic scrap and used plastic products or packaging. The process includes a conservative estimate of 100 miles of transport of the waste plastic from location of discard (“curbside”), through locations of collection and to the recycling center. Within the recycling facility, professionals model washing, separation, granulation and pelletizing. This model applies mass allocation for the separation and cleaning of the mixed waste plastic, such that all plastics (PET, polypropylene, polystyrene), despite differing ease of separation, share the burdens of separation equally. The energy required for pelletization and compounding of the final plastic depends on the polymer type, based on the material properties (specific heat and enthalpy of fusion) of the resin.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Data from Sphera: Recycling of polyethylene terephthalate (PET) \[Cascale\] GUID: {50FF7133-4559-4414-818F-254367CB932B}
- **Synthetic Leather Custom**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000641)
- Description: No process exists in the current selection. Use this option for a customized substrate blend.
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: None.

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 10 of 20: Synthetic Leather PET(75/25))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather PET(75/25)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000152)
- Description: This process represents a substrate for a synthetic leather containing 75% substrate and 25% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Polyethylene terephthalate (abbreviated as PET or PETE, CAS number 25038-59-9) is a very common linear polymer best known for its use in manufacturing plastic bottles. Two major production paths exist for producing polyethylene terephthalate. The older process uses transesterification of dimethyl terephthalate as a precursor, and a more recently developed process relies on the direct esterification of terephthalic acid with ethylene glycol, modeled here. The terephthalic acid route offers advantages for its higher reaction rate, production of high molecular weight polymer chains, and lower use of ancillary inputs. In this reaction, ethylene glycol and terephthalic acid combine in the liquid phase with a catalyst, resulting in the esterification of the terephthalic acid. After separation of unreacted ethylene glycol, the reaction product mixes vigorously with a catalyst to instigate the polycondensation reaction, resulting in the final polymer product.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 11 of 20: Synthetic Leather Sea-island (75/25))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather Sea-island (75/25)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000154)
- Description: This process represents a substrate for a synthetic leather containing 75% substrate and 25% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Polyethylene terephthalate (abbreviated as PET or PETE, CAS number 25038-59-9) is a very common linear polymer best known for its use in manufacturing plastic bottles. Two major production paths exist for producing polyethylene terephthalate. The older process uses transesterification of dimethyl terephthalate as a precursor, and a more recently developed process relies on the direct esterification of terephthalic acid with ethylene glycol, modeled here. The terephthalic acid route offers advantages for its higher reaction rate, production of high molecular weight polymer chains, and lower use of ancillary inputs. In this reaction, ethylene glycol and terephthalic acid combine in the liquid phase with a catalyst, resulting in the esterification of the terephthalic acid. After separation of unreacted ethylene glycol, the reaction product mixes vigorously with a catalyst to instigate the polycondensation reaction, resulting in the final polymer product.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Based on expert assumptions and GaBi background data. Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 12 of 20: Synthetic Leather Sea-island (45/55))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather Sea-island (45/55)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000726)
- Description: This process represents a substrate for a synthetic leather containing 45% substrate and 55% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Polyethylene terephthalate (abbreviated as PET or PETE, CAS number 25038-59-9) is a very common linear polymer best known for its use in manufacturing plastic bottles. Two major production paths exist for producing polyethylene terephthalate. The older process uses transesterification of dimethyl terephthalate as a precursor, and a more recently developed process relies on the direct esterification of terephthalic acid with ethylene glycol, modeled here. The terephthalic acid route offers advantages for its higher reaction rate, production of high molecular weight polymer chains, and lower use of ancillary inputs. In this reaction, ethylene glycol and terephthalic acid combine in the liquid phase with a catalyst, resulting in the esterification of the terephthalic acid. After separation of unreacted ethylene glycol, the reaction product mixes vigorously with a catalyst to instigate the polycondensation reaction, resulting in the final polymer product.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Based on expert assumptions and GaBi background data. Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 13 of 20: Synthetic Leather PET(65/35))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather PET(65/35)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000604)
- Description: This process represents a substrate for a synthetic leather containing 65% substrate and 35% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Polyethylene terephthalate (abbreviated as PET or PETE, CAS number 25038-59-9) is a very common linear polymer best known for its use in manufacturing plastic bottles. Two major production paths exist for producing polyethylene terephthalate. The older process uses transesterification of dimethyl terephthalate as a precursor, and a more recently developed process relies on the direct esterification of terephthalic acid with ethylene glycol, modeled here. The terephthalic acid route offers advantages for its higher reaction rate, production of high molecular weight polymer chains, and lower use of ancillary inputs. In this reaction, ethylene glycol and terephthalic acid combine in the liquid phase with a catalyst, resulting in the esterification of the terephthalic acid. After separation of unreacted ethylene glycol, the reaction product mixes vigorously with a catalyst to instigate the polycondensation reaction, resulting in the final polymer product.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 14 of 20: Synthetic Leather Nylon 6 (45/55) to Synthetic Leather 70 Polyester/30 Nylon (55/45))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather Nylon 6 (45/55)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000724)
- Description: This process represents a substrate for a synthetic leather containing 45% substrate and 55% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Nylon 6 producers make Nylon 6 from caprolactam which they synthesize from benzene, ammonia, hydrogen and sulphuric acid (oleum). Via the intermediate products cyclohexane and cyclohexanone, producers make the monomer caprolactam. Producers create Nylon 6 by reacting caprolactam with water and producing the intermediate product aminocaproic acid. The acid forms from ring opening of caprolactam when water is added. Producers heat caprolactam and water to 250 degrees Celsius. Nylon 6 producers then form Nylon 6 by copolymerizing caprolactam and aminocaproic acid. Producers can carry out the process batchwise or continuously.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyamide 6 granulate (PA 6) [https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml)
- **Synthetic Leather 70 Polyester/30 Nylon (55/45)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000609)
- Description: This process represents a substrate for a synthetic leather containing 55% substrate and 45% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Technology represents production out of hexamethylene diamine and adipic acid. For polyester, data come from the average unit process from the Eco-profiles of the European plastics industry. Average data show the production of amorphous PET out of ethylene glycol and PTA.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyamide 6 granulate (PA 6) [https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml) Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 15 of 20: Synthetic Leather 70 Polyester/30 Nylon (65/35))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather 70 Polyester/30 Nylon (65/35)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000610)
- Description: This process represents a substrate for a synthetic leather containing 65% substrate and 35% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Technology represents production out of hexamethylene diamine and adipic acid. For polyester, data come from the average unit process from the Eco-profiles of the European plastics industry. Average data show the production of amorphous PET out of ethylene glycol and PTA.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyamide 6 granulate (PA 6) [https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml) Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 16 of 20: Synthetic Leather Sea-island (55/45))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather Sea-island (55/45)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000605)
- Description: This process represents a substrate for a synthetic leather containing 55% substrate and 45% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Polyethylene terephthalate (abbreviated as PET or PETE, CAS number 25038-59-9) is a very common linear polymer best known for its use in manufacturing plastic bottles. Two major production paths exist for producing polyethylene terephthalate. The older process uses transesterification of dimethyl terephthalate as a precursor, and a more recently developed process relies on the direct esterification of terephthalic acid with ethylene glycol, modeled here. The terephthalic acid route offers advantages for its higher reaction rate, production of high molecular weight polymer chains, and lower use of ancillary inputs. In this reaction, ethylene glycol and terephthalic acid combine in the liquid phase with a catalyst, resulting in the esterification of the terephthalic acid. After separation of unreacted ethylene glycol, the reaction product mixes vigorously with a catalyst to instigate the polycondensation reaction, resulting in the final polymer product.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Based on expert assumptions and GaBi background data. Data from Sphera: Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 17 of 20: Synthetic Leather 70 Polyester/30 Nylon (75/25))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather 70 Polyester/30 Nylon (75/25)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization, which serves as the default representative for Polyurethane (PU) Synthetic Leather. (Process ID: PR0804000004)
- Description: This process represents a substrate for a synthetic leather containing 75% substrate and 25% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Technology represents production out of hexamethylene diamine and adipic acid. For polyester, data come from the average unit process from the Eco-profiles of the European plastics industry. Average data show the production of amorphous PET out of ethylene glycol and PTA.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyamide 6 granulate (PA 6) [https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml) Polyethylene terephthalate granulate (PET) via PTA (open input for Ethylene glycol) [https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml](https://lcadatabase.sphera.com/2026/xml-data/processes/110f6ff8-6063-4a61-8403-23c927236cdb.xml) Ethylene glycol (MEG) via coal to ethylene glycol process [https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/22892a97-f8b5-4a35-b405-5d24329e6b8f.xml) Ethylene glycol (from ethene and oxygen via EO) [https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/28f49a98-c843-4386-84e7-717edc947a46.xml)

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 18 of 20: Synthetic Leather rPET (65/35))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather rPET (65/35)**: Users click this option at Substrate Raw Material (SL-P001) via Mechanical Recycling. (Process ID: PR0804000594)
- Description: This process represents a substrate for a synthetic leather containing 65% substrate and 35% coating, on a mass basis. Please click a substrate process with corresponding percentages in the “PU Type” stage. This process represents resin-specific environmental burdens associated with the production of secondary plastic pellets from post-consumer plastic scrap and used plastic products or packaging. The process includes a conservative estimate of 100 miles of transport of the waste plastic from location of discard (“curbside”), through locations of collection and to the recycling center. Within the recycling facility, professionals model washing, separation, granulation and pelletizing. This model applies mass allocation for the separation and cleaning of the mixed waste plastic, such that all plastics (PET, polypropylene, polystyrene), despite differing ease of separation, share the burdens of separation equally. The energy required for pelletization and compounding of the final plastic depends on the polymer type, based on the material properties (specific heat and enthalpy of fusion) of the resin.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Data from Sphera: Recycling of polyethylene terephthalate (PET) \[Cascale\] GUID: {50FF7133-4559-4414-818F-254367CB932B}

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 19 of 20: Synthetic Leather rPET (75/25))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather rPET (75/25)**: Users click this option at Substrate Raw Material (SL-P001) via Mechanical Recycling, which serves as the default representative for Polyurethane (PU) Synthetic Leather. (Process ID: PR0804000112)
- Description: This process represents a substrate for a synthetic leather containing 75% substrate and 25% coating, on a mass basis. Please click a substrate process with corresponding percentages in the “PU Type” stage. This process represents resin-specific environmental burdens associated with the production of secondary plastic pellets from post-consumer plastic scrap and used plastic products or packaging. The process includes a conservative estimate of 100 miles of transport of the waste plastic from location of discard (“curbside”), through locations of collection and to the recycling center. Within the recycling facility, professionals model washing, separation, granulation and pelletizing. This model applies mass allocation for the separation and cleaning of the mixed waste plastic, such that all plastics (PET, polypropylene, polystyrene), despite differing ease of separation, share the burdens of separation equally. The energy required for pelletization and compounding of the final plastic depends on the polymer type, based on the material properties (specific heat and enthalpy of fusion) of the resin.
- Sustainability attribute: Recycled
- Characteristic: Synthetic
- Geography of data: Global/generic
- Data source: Data from Sphera: Recycling of polyethylene terephthalate (PET) \[Cascale\] GUID: {50FF7133-4559-4414-818F-254367CB932B}

 Polyurethane (PU) Synthetic Leather: generic subtypes (industry average) (part 20 of 20: Synthetic Leather Nylon 6 (55/45))

This part continues the list for Polyurethane (PU) Synthetic Leather: generic subtypes (industry average).

- **Synthetic Leather Nylon 6 (55/45)**: Users click this option at Substrate Raw Material (SL-P001) via Polymerization. (Process ID: PR0804000601)
- Description: This process represents a substrate for a synthetic leather containing 55% substrate and 45% coating, on a mass basis. Please click a substrate process with corresponding percentages in the "PU Type" stage. Nylon 6 producers make Nylon 6 from caprolactam which they synthesize from benzene, ammonia, hydrogen and sulphuric acid (oleum). Via the intermediate products cyclohexane and cyclohexanone, producers make the monomer caprolactam. Producers create Nylon 6 by reacting caprolactam with water and producing the intermediate product aminocaproic acid. The acid forms from ring opening of caprolactam when water is added. Producers heat caprolactam and water to 250 degrees Celsius. Nylon 6 producers then form Nylon 6 by copolymerizing caprolactam and aminocaproic acid. Producers can carry out the process batchwise or continuously.
- Characteristic: Synthetic
- Geography of data: China
- Data source: Data from Sphera: Polyamide 6 granulate (PA 6) [https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml](https://lcadatabase.sphera.com/2024/xml-data/processes/6385a166-6c87-4ee6-ae42-6c7af075ec0a.xml)

 Polyurethane (PU) Synthetic Leather: lifecycle stages and processes

- **Substrate Raw Material (SL-P001)**
- Polymerization: Polymerization
- transforms Fossil Fuel into Substrate
- Recycling: Mechanical Recycling
- transforms Post-Consumer Waste into Substrate
- Default at this stage: Polymerization, Mechanical Recycling
- Country of manufacture and supplier facility (FEM) data do not change this stage. Raw materials always use MSI data with the global average electricity grid.
- **PU Type (SL-P002)**
- Coating: Water-Based PU {BASF}, Polyurethane Coating, TPU Coating, Haptex (Water Based) {BASF}, Solvent-Based PU {BASF}, Haptex (Solvent Based) {BASF}
- transforms Substrate into Coated Substrate
- Default at this stage: Polyurethane Coating
- Country of manufacture: does not change the result at this stage
- Users can click "No process" at this stage
- **Substrate Formation (SL-P003)**
- Non-Woven: Water Jet, Needle Punching
- transforms Substrate into Formed Substrate
- Default at this stage: Needle Punching
- Country of manufacture: does not change the result at this stage
- Users can click "No process" at this stage
- **Production Process (SL-P004)**
- Lamination: Wet + Dry Process (Water Based) {BASF}, Haptex (Water Based) {BASF}, Wet + Dry Process (Solvent Based) {BASF}, Wet + Dry Process, Wet Process, Haptex (Solvent Based) {BASF}, Dry Process
- transforms Formed Substrate into Unfinished Synthetic Leather
- Default at this stage: Wet + Dry Process
- Country of manufacture: does not change the result at this stage
- Users can click "No process" at this stage
- **Specialty Application (SL-P005)**
- Specialty Application: Water Repellency, Waterproofing, Hydrolysis
- transforms Unfinished Synthetic Leather into Finished Synthetic Leather
- Default at this stage: Hydrolysis
- Country of manufacture: does not change the result at this stage
- Users can click "No process" at this stage

[![Worldly logo](https://support.worldly.io/hs-fs/hubfs/Worldly%20Media%20Kit/Worldly%20Logos/Worldly_LogoTM_Red.png?width=120&height=30&name=Worldly_LogoTM_Red.png "Worldly logo")](https://www.worldly.io)

© 2026 Worldly. All Rights Reserved

[Terms of use](https://worldly.io/terms-of-use/)  |  [DPA](https://worldly.io/data-privacy-addendum/)  |  [Privacy Policy](https://worldly.io/privacy-policy/)  |  [Cookie notice](https://worldly.io/cookie-notice/)

 

<https://www.linkedin.com/company/worldlyio> <https://www.youtube.com/@worldlyio>