Skip to main content

Insights Hub: Social Baseline Dashboard

  • Updated

Table of Contents

 

1. Navigation

  • Access Insights hub under Insights in the navigation bar.
  • This takes you to the main dashboard view.

 

2. Dashboard Overview

These dashboards are structured with decision-making in mind and focuses on actionability. KPI cards are located at the top of the page, hotspot charts are below, and actionable initiatives are on the right-hand column.

These visualizations highlight current data alongside the contextual information needed for decision-making.

Change dashboards by selecting between the Impact Areas.

 

3. Social Baseline KPI Cards

The Social Baseline Dashboard has the following KPI Cards:

  • Total Number of Zero Tolerance Flags
  • Total Number of High Risk Flags
  • Total Number of Medium Risk Flags
  • Total Number of All Flags
  • Average Number of Zero Tolerance Flags
  • Average Number of High Risk Flags
  • Average Number of Medium Risk Flags
  • Average Number of All Flags
  • Total Number of Legal Flags
  • Average Number of Legal Flags
  • Average Number of Health & Safety Flags
  • Average Number of Recruitment & Hiring Flags
  • Average Number of Termination Flags
  • Average Number of Wages & Benefits Flags
  • Average Number of Worker Involvement Flags
  • Average Number of Worker Treatment Flags
  • Average Number of Working Hours Flags

If there is a KPI you wish to see in your dashboard, please reach out to support.worldly.io to submit a request. Click here to learn about the Social Baseline Metric Definitions.

 

How do KPI Cards work?

At the top of the dashboard, there are three KPI cards that each highlight a different critical metric for tracking progress.

Each KPI card’s color-coding helps to quickly identify areas of concern versus those performing well. In addition to the KPI value (ex: 686.225 M), each card also includes:

  • Year-over-year changes symbolized by the calendar icon, which show the % change from last year.
  • Peer comparison that benchmarks against similar companies in your industry, symbolized by the three vertical bars and show the % difference from benchmark.
  • Download button to access PNG images to easily distribute insights to your team.

 

Year-over-year changes

Let’s take a deeper look at Total Emissions. Clicking on the KPI card reveals more detailed graphs on year-over-year changes and peer comparisons.

  1. The dotted line shows the average benchmark within the same time frame.
  2. The red line above shows the progress of total emissions in terms of kgCO2e from 2019 to 2023.

 

Box plot

The red box in the box plot diagram shows how your total kgCO2e compares to industry peers as symbolized by the grey box. 

Match the numbers in the screenshot to the numbered bullet points below to learn how to read a box plot diagram:

  1. The top horizontal line shows the maximum, or greatest value, excluding outliers.
    • Ex: The maximum value lies at 225 M.
  2. The top of the light red box shows the upper quartile. 25% of the data is above this value, and 75% of the data falls below.
    • Ex: The upper quartile lies at 150 M.
  3. The line between the light red box and the dark red box is the median. This marks the mid-point of the data and divides the box into two parts. 50% of the data is greater than or equal to this value, and the other 50% is less than this value.
    • Ex: The median lies just below 100 M.
  4. The bottom of the dark red box is the lower quartile. 25% of the data is below, and 75% of the data is above this value.
    • Ex: The lower quartile lies at 75 M.
  5. The bottom horizontal line shows the minimum, or the lowest value, excluding outliers.
    • Ex: The minimum value lies at 25 M.

Clicking on the KPI Card reveals a drawer where you can see year-over-year changes and a box plot. Additionally, the definition provided at the top also indicates whether this KPI is affected by Production Volume Allocation.

Conversely, it will state if the metric is not affected by production allocation. 



Both graphs are also downloadable by clicking on the icon in the upper right-hand corner.

Benchmark data is affected by filters but not by production allocation. Click here to learn more about benchmarking.

 

4. Social Baseline Hotspots

Each hotspot chart is downloadable by selecting the icon in the upper right corner. Downloading bar charts produces an image, while downloading tables produce a CSV file.

The Social Baseline Dashboard has the following hotspots:

 

Risk-Level Distribution

Distribution of flags by severity (Medium Risk, High Risk, Zero Tolerance). More details on metrics

 

Flags by Country

Average of all flags per facility, grouped by country; line overlay shows the number of facilities in each country. More details on metrics

 

Flags by Tags

Average of all flags per facility, grouped by tag; line overlay shows facilities per tag. More details on metrics.

 

Flags by Cadences

Average of all flags per facility, grouped by cadence; line overlay shows facilities per cadence. More details on metrics.

 

Facility Profile - Legal Compliance

List of facilities with flags by risk area and FSLM section. Questions are designated as Legal Compliance if they are related to legal requirements as stated in the CAF questions. A question can be tagged as both legal compliance and risk-rated as zero tolerance, medium risk, or high risk. More details on metrics.

 

Facility Profile - Zero Tolerance

List of facilities with flags by risk area and FSLM section. Zero Tolerance violations represent the most severe infractions, where any instance of non-compliance leads to serious human rights violations or imminent threats to worker health and safety. These violations are classified as critical under the Better Work Zero Tolerance Protocol and ILO Core Conventions, necessitating immediate intervention. More details on metrics.

 

Health & Safety - Legal Compliance

List of facilities with flags by risk area and FSLM section. Questions are designated as Legal Compliance if they are related to legal requirements as stated in the CAF questions. A question can be tagged as both legal compliance and risk-rated as zero tolerance, medium risk, or high risk. More details on metrics.

 

Health & Safety - Zero Tolerance

List of facilities with flags by risk area and FSLM section. Zero Tolerance violations represent the most severe infractions, where any instance of non-compliance leads to serious human rights violations or imminent threats to worker health and safety. These violations are classified as critical under the Better Work Zero Tolerance Protocol and ILO Core Conventions, necessitating immediate intervention. More details on metrics.

 

Recruitment & Hiring - Legal Compliance

List of facilities with flags by risk area and FSLM section. Questions are designated as Legal Compliance if they are related to legal requirements as stated in the CAF questions. A question can be tagged as both legal compliance and risk-rated as zero tolerance, medium risk, or high risk. More details on metrics.

 

Recruitment & Hiring - Zero Tolerance

List of facilities with flags by risk area and FSLM section. Zero Tolerance violations represent the most severe infractions, where any instance of non-compliance leads to serious human rights violations or imminent threats to worker health and safety. These violations are classified as critical under the Better Work Zero Tolerance Protocol and ILO Core Conventions, necessitating immediate intervention. More details on metrics.

 

Termination - Legal Compliance

List of facilities with flags by risk area and FSLM section. Questions are designated as Legal Compliance if they are related to legal requirements as stated in the CAF questions. A question can be tagged as both legal compliance and risk-rated as zero tolerance, medium risk, or high risk. More details on metrics.

 

Termination - Zero Tolerance

List of facilities with flags by risk area and FSLM section. Zero Tolerance violations represent the most severe infractions, where any instance of non-compliance leads to serious human rights violations or imminent threats to worker health and safety. These violations are classified as critical under the Better Work Zero Tolerance Protocol and ILO Core Conventions, necessitating immediate intervention. More details on metrics.

 

Wages & Benefits - Legal Compliance

List of facilities with flags by risk area and FSLM section. Questions are designated as Legal Compliance if they are related to legal requirements as stated in the CAF questions. A question can be tagged as both legal compliance and risk-rated as zero tolerance, medium risk, or high risk. More details on metrics.

 

Wages & Benefits - Zero Tolerance

List of facilities with flags by risk area and FSLM section. Zero Tolerance violations represent the most severe infractions, where any instance of non-compliance leads to serious human rights violations or imminent threats to worker health and safety. These violations are classified as critical under the Better Work Zero Tolerance Protocol and ILO Core Conventions, necessitating immediate intervention. More details on metrics.

 

Worker Involvement - Legal Compliance

List of facilities with flags by risk area and FSLM section. Questions are designated as Legal Compliance if they are related to legal requirements as stated in the CAF questions. A question can be tagged as both legal compliance and risk-rated as zero tolerance, medium risk, or high risk. More details on metrics.

 

Worker Involvement - Zero Tolerance

List of facilities with flags by risk area and FSLM section. Zero Tolerance violations represent the most severe infractions, where any instance of non-compliance leads to serious human rights violations or imminent threats to worker health and safety. These violations are classified as critical under the Better Work Zero Tolerance Protocol and ILO Core Conventions, necessitating immediate intervention. More details on metrics.

 

Worker Treatment - Legal Compliance

List of facilities with flags by risk area and FSLM section. Questions are designated as Legal Compliance if they are related to legal requirements as stated in the CAF questions. A question can be tagged as both legal compliance and risk-rated as zero tolerance, medium risk, or high risk. More details on metrics.

 

Worker Treatment - Zero Tolerance

List of facilities with flags by risk area and FSLM section. Zero Tolerance violations represent the most severe infractions, where any instance of non-compliance leads to serious human rights violations or imminent threats to worker health and safety. These violations are classified as critical under the Better Work Zero Tolerance Protocol and ILO Core Conventions, necessitating immediate intervention. More details on metrics.

 

Working Hours - Legal Compliance

List of facilities with flags by risk area and FSLM section. Questions are designated as Legal Compliance if they are related to legal requirements as stated in the CAF questions. A question can be tagged as both legal compliance and risk-rated as zero tolerance, medium risk, or high risk. More details on metrics.

 

Working Hours - Zero Tolerance

List of facilities with flags by risk area and FSLM section. Zero Tolerance violations represent the most severe infractions, where any instance of non-compliance leads to serious human rights violations or imminent threats to worker health and safety. These violations are classified as critical under the Better Work Zero Tolerance Protocol and ILO Core Conventions, necessitating immediate intervention. More details on metrics.

 

5. Social Baseline Initiatives

The right-hand column features a list of initiatives that facilities can take action on. The data used in each initiative comes directly from specific questions in any section of the FSLM. 

Note: Only Engagement or Impact subscriptions can access this feature.

 

Top initiatives are based on what users most frequently ask about or indicate they want to track. These often represent the most critical actions that facilities can take to improve their sustainability performance or critical foundational work.

The Social Baseline Dashboard has the following initiatives:

  • Prevalence
  • Wages & Benefits
  • Health & Safety
  • Recruitment & Hiring
  • Worker Treatment
  • Termination
  • Worker Involvement
  • Working Hours

When you click on an initiative, a drawer will appear where you can:

Track energy use for any of the applicable facilities.

  1. Track energy usage
  2. % change from last year
  3. % difference from benchmark

 

View a table that breaks down the initiative into further detail.

 

Download a file for additional columns and follow-up question data.

 

Access more resources such as case studies and links for capacity building.

 

6. Social Baseline Filters

The left-hand filter column automatically updates all metrics throughout the dashboard to reflect the filtered data set. The dashboard filters enable users to organize and slice the data to quickly determine which facilities are best suited for intervention.

IH_1.gif

Some of the most common filters used include country, facility type, tier type, or tags. You can also apply multiple filters at the same time, such as country, facility type, and other parameters.

  1. Impact Areas Dropdown - Select which impact area the dashboard should focus on. Impact Areas include:
  2. Assessment Year Dropdown - Select the applicable year the dashboard should use.
  3. Data Sources - Select the “i” icon next to Data Sources to view which data sources are included.
  4. Data Ownership - Toggle between "My Modules" and "Modules Shared with Me"
  5. Verification - Indicate whether assessment data is verified or not.
  6. Country - Select the applicable regions.
  7. Industry Sector - Select the applicable industry sectors.
  8. Facility Type - Select the applicable facility types.
  9. Tag - Select the applicable tags.
  10. Cadence - Select the applicable cadences.
  11. Accounts - Select the applicable accounts.
  12. Number of Employees - Select the number of employees.

 

7. How to add tags after creating a cadence

Tags are used to help categorize, organize, or describe assessments. 

You can manage tags by navigating to Assessments, selecting Higg FSLM, and then selecting the Modules tab.

 

Adding a Tag

  1. On the Modules tab, notice the Tags column. 
  2. Identify the assessment you want to add a tag to and click on the drop-down menu to the right.
  3. Type in the tag you wish to add. In this example, we’re adding a tag to identify this assessment’s facility is a Tier 1 facility.
  4. Select Add tag. Once the tag is added, you can use the filter function at the top of the column to filter for assessments with that specific tag.
  5. The added tag will appear within Insights Hub, CSV exports, FEM Analytics, and wherever you can find tags.

Related to